Recherche avancée

Sur d’autres sites (6789)

• ffmpeg says : "option framerate not found"

  29 novembre 2018, par Jason

  Good afternoon.

  I’ve been trying to use ffmpeg to split a .mpeg into a sequence of .jpeg images. Please note that this is the inverse problem of the one specified here, but the problem I’m facing is not the same as the problem the author of that thread is facing.

  Specifically, I have tried all the following mpeg codecs available in my ffmpeg installation :

  DEV D  ffv1            FFmpeg video codec #1
  
  DEVSD  ffvhuff         Huffyuv FFmpeg variant
  
  DEVSDT mpeg1video      MPEG-1 video
  
  D V DT mpeg1video_vdpau MPEG-1 video (VDPAU acceleration)
  
  D V D  mpeg2_crystalhd MPEG-2 Video (CrystalHD acceleration)
  
  DEVSDT mpeg2video      MPEG-2 video
  
  DEVSDT mpeg4           MPEG-4 part 2
  
  D V D  mpeg4_crystalhd MPEG-4 Part 2 (CrystalHD acceleration)
  
  D V DT mpeg4_vdpau     MPEG-4 part 2 (VDPAU)
  
  D VSDT mpegvideo       MPEG-1 video
  
  D V DT mpegvideo_vdpau MPEG-1/2 video (VDPAU acceleration)
  
  D VSDT mpegvideo_xvmc  MPEG-1/2 video XvMC (X-Video Motion Compensation)
  
  DEVSD  msmpeg4         MPEG-4 part 2 Microsoft variant version 3
  
  D V D  msmpeg4_crystalhd MPEG-4 Part 2 Microsoft variant version 3 (CrystalHD acceleration)
  
  D VSD  msmpeg4v1       MPEG-4 part 2 Microsoft variant version 1
  
  DEVSD  msmpeg4v2       MPEG-4 part 2 Microsoft variant version 2

  I’ve tried supplying ffmpeg with all different codecs to try to split an input .mpeg video file with 2548 frames into 2548 .jpegs, by using the -vcodec option :

  ffmpeg -r 2548 -i frames.mpeg frames_%06d.jpg -vcodec $codec

  where $codec is any codec among the ones listed above, e.g. ffv1, mpeg4, etc. However, all my efforts result in the following error :

  [NULL @ 0x1948f20] Value 4707126720094797824.000000 for parameter 'probesize' out of range
  
  [NULL @ 0x1948f20] Value 4707126720094797824.000000 for parameter 'analyzeduration' out of range
  
  [NULL @ 0x1948f20] Value 4697254411347427328.000000 for parameter 'indexmem' out of range
  
  [NULL @ 0x1948f20] Value 4703785510416416768.000000 for parameter 'rtbufsize' out of range
  
  [NULL @ 0x1948f20] Value -4616189618054758400.000000 for parameter 'fpsprobesize' out of range
  
  [NULL @ 0x1948f20] Value 4607182418800017408.000000 for parameter 'f_err_detect' out of     range
  
  [NULL @ 0x1948f20] Value 4607182418800017408.000000 for parameter 'err_detect' out of range
  
  Option framerate not found.  

  Which is weird, because I’ve actually specified the frame rate parameter through the -r switch. I googled a bit and it appears that this error was mentioned approximately a year and a half ago on the ffmpeg bug tracker but that information makes little sense to me because it’s relevant to the devs. Curiously, if I interchange the position of the parameters and put -r after -i or even after -vcodec, the error message changes to :

  [NULL @ 0x24abf20] Value 4707126720094797824.000000 for parameter 'probesize' out of range
  
  [NULL @ 0x24abf20] Value 4707126720094797824.000000 for parameter 'analyzeduration' out of range
  
  [NULL @ 0x24abf20] Value 4697254411347427328.000000 for parameter 'indexmem' out of range
  
  [NULL @ 0x24abf20] Value 4703785510416416768.000000 for parameter 'rtbufsize' out of range
  
  [NULL @ 0x24abf20] Value -4616189618054758400.000000 for parameter 'fpsprobesize' out of  range
  
  [NULL @ 0x24abf20] Value 4607182418800017408.000000 for parameter 'f_err_detect' out of  range
  
  [NULL @ 0x24abf20] Value 4607182418800017408.000000 for parameter 'err_detect' out of range
  
  [NULL @ 0x24b23c0] Value 4686111960511545344.000000 for parameter 'b' out of range
  
  [NULL @ 0x24b23c0] Value 4683532506232782848.000000 for parameter 'ab' out of range
  
  [NULL @ 0x24b23c0] Value 4705844345939427328.000000 for parameter 'bt' out of range
  
  [NULL @ 0x24b23c0] Value 4617315517961601024.000000 for parameter 'me_method' out of range
  
  [NULL @ 0x24b23c0] Value 4622945017495814144.000000 for parameter 'g' out of range
  
  [NULL @ 0x24b23c0] Value 4611686018427387904.000000 for parameter 'qmin' out of range
  
  [NULL @ 0x24b23c0] Value 4629418941960159232.000000 for parameter 'qmax' out of range
  
  [NULL @ 0x24b23c0] Value 4613937818241073152.000000 for parameter 'qdiff' out of range
  
  [NULL @ 0x24b23c0] Value -4616189618054758400.000000 for parameter 'wpredp' out of range
  
  [NULL @ 0x24b23c0] Value 4607182418800017408.000000 for parameter 'bug' out of range
  
  [NULL @ 0x24b23c0] Value 4607182418800017408.000000 for parameter 'er' out of range
  
  [NULL @ 0x24b23c0] Value 4607182418800017408.000000 for parameter 'err_detect' out of range
  
  [NULL @ 0x24b23c0] Value 4613937818241073152.000000 for parameter 'ec' out of range
  
  [NULL @ 0x24b23c0] Value 4620693217682128896.000000 for parameter 'ildctcmp' out of range
  
  [NULL @ 0x24b23c0] Value 4620693217682128896.000000 for parameter 'subq' out of range
  
  [NULL @ 0x24b23c0] Value 4696837138094751744.000000 for parameter 'ibias' out of range
  
  [NULL @ 0x24b23c0] Value 4696837138094751744.000000 for parameter 'pbias' out of range
  
  [NULL @ 0x24b23c0] Value 4642507528377204736.000000 for parameter 'lmin' out of range
  
  [NULL @ 0x24b23c0] Value 4660262442142531584.000000 for parameter 'lmax' out of range
  
  [NULL @ 0x24b23c0] Value 4696130710463840256.000000 for parameter 'flags2' out of range
  
  [NULL @ 0x24b23c0] Value 4607182418800017408.000000 for parameter 'threads' out of range
  
  [NULL @ 0x24b23c0] Value 4620693217682128896.000000 for parameter 'nssew' out of range
  
  [NULL @ 0x24b23c0] Value -4586705114244317184.000000 for parameter 'profile' out of range
  
  [NULL @ 0x24b23c0] Value -4586705114244317184.000000 for parameter 'level' out of range
  
  [NULL @ 0x24b23c0] Value 4623507967449235456.000000 for parameter 'skipcmp' out of range
  
  [NULL @ 0x24b23c0] Value 4642507528377204736.000000 for parameter 'mblmin' out of range
  
  [NULL @ 0x24b23c0] Value 4660262442142531584.000000 for parameter 'mblmax' out of range
  
  [NULL @ 0x24b23c0] Value 4643211215818981376.000000 for parameter 'mepc' out of range
  
  [NULL @ 0x24b23c0] Value 4607182418800017408.000000 for parameter 'bidir_refine' out of range
  
  [NULL @ 0x24b23c0] Value -4616189618054758400.000000 for parameter 'cqp' out of range
  
  [NULL @ 0x24b23c0] Value 4627730092099895296.000000 for parameter 'keyint_min' out of range
  
  [NULL @ 0x24b23c0] Value 4607182418800017408.000000 for parameter 'refs' out of range
  
  [NULL @ 0x24b23c0] Value -4616189618054758400.000000 for parameter 'directpred' out of range
  
  [NULL @ 0x24b23c0] Value 4618441417868443648.000000 for parameter 'sc_factor' out of range
  
  [NULL @ 0x24b23c0] Value 4643211215818981376.000000 for parameter 'mv0_threshold' out of range
  
  [NULL @ 0x24b23c0] Value 4630826316843712512.000000 for parameter 'b_sensitivity' out of range
  
  [NULL @ 0x24b23c0] Value -4616189618054758400.000000 for parameter 'compression_level' out of range
  
  [NULL @ 0x24b23c0] Value -4616189618054758400.000000 for parameter 'min_prediction_order' out of range
  
  [NULL @ 0x24b23c0] Value -4616189618054758400.000000 for parameter 'max_prediction_order' out of range
  
  [NULL @ 0x24b23c0] Value -4616189618054758400.000000 for parameter 'prediction_order_method' out of range
  
  [NULL @ 0x24b23c0] Value -4616189618054758400.000000 for parameter 'min_partition_order' out of range
  
  [NULL @ 0x24b23c0] Value -4616189618054758400.000000 for parameter 'max_partition_order' out of range
  
  [NULL @ 0x24b23c0] Value 4607182418800017408.000000 for parameter 'ticks_per_frame' out of range
  
  [NULL @ 0x24b23c0] Value 4611686018427387904.000000 for parameter 'color_primaries' out of range
  
  [NULL @ 0x24b23c0] Value 4611686018427387904.000000 for parameter 'color_trc' out of range
  
  [NULL @ 0x24b23c0] Value 4611686018427387904.000000 for parameter 'colorspace' out of range
  
  [NULL @ 0x24b23c0] Value -4616189618054758400.000000 for parameter 'aq_mode' out of range
  
  [NULL @ 0x24b23c0] Value -4616189618054758400.000000 for parameter 'rc_lookahead' out of range
  
  [NULL @ 0x24b23c0] Value -4616189618054758400.000000 for parameter 'lpc_type' out of range
  
  [NULL @ 0x24b23c0] Value -4616189618054758400.000000 for parameter 'lpc_passes' out of range
  
  [NULL @ 0x24b23c0] Value 4613937818241073152.000000 for parameter 'thread_type' out of range
  
  [NULL @ 0x24b23c0] Value -4616189618054758400.000000 for parameter 'request_sample_fmt' out of range
  
  frames.mpeg: could not find codec parameters

  I’m at a loss as to what to do with this problem, and am looking for some assistance.

  Kind regards,

  Jason

• OpenCV VideoWriter using ffmpeg with "Could not open codec 'libx264'" Error

  19 avril, par user2262504

  I am new to OpenCV, and I want write Mat images into video using VideoWriter on Ubuntu 12.04. But when constructing VideoWriter, errors came out.

  



  It seems that OpenCV invoke ffmpeg API using default parameters and ffmpeg invoke x264 using its default parameters. Then these setting is broken for libx264. Thus the "Could not open codec 'libx264'" error.

  



  Anyone has ideas to solve this problem ?

  



  More specifically :

  



  

  1. anyone knows where and how OpenCV invoke ffmpeg API ?

  


  2. how to change ffmpeg default settings using code, hopefull, can be easily embeded into OpenCV ?

  


  3. will changes of default in ffmpeg be carried to libx264 ?

  


  



  Errors :

  



  1. Uising CV_FOURCC(&#x27;H&#x27;, &#x27;2&#x27;, &#x27;6&#x27;, &#x27;4&#x27;)&#xA;[libx264 @ 0x255de40] broken ffmpeg default settings detected&#xA;[libx264 @ 0x255de40] use an encoding preset (e.g. -vpre medium)&#xA;[libx264 @ 0x255de40] preset usage: -vpre <speed> -vpre <profile>&#xA;[libx264 @ 0x255de40] speed presets are listed in x264 --help&#xA;[libx264 @ 0x255de40] profile is optional; x264 defaults to high&#xA;Could not open codec &#x27;libx264&#x27;: Unspecified error&#xA;&#xA;2. Using FOURCC = -1 to invoke user customized codec&#xA;OpenCV Error: Unsupported format or combination of formats (Gstreamer Opencv &#xA;backend doesn&#x27;t support this codec acutally.) in CvVideoWriter_GStreamer::open, &#xA;file /home/XXX/Downloads/opencv-2.4.8/modules/highgui/src/cap_gstreamer.cpp, &#xA;line 505 terminate called after throwing an instance of &#x27;cv::Exception&#x27;&#xA;what():  /home/XXX/Downloads/opencv-2.4.8/modules/highgui/src/cap_gstreamer.cpp:&#xA;505: error: (-210) Gstreamer Opencv backend doesn&#x27;t support this codec acutally.&#xA;in function CvVideoWriter_GStreamer::open&#xA;</profile></speed>

  



  Codes :

  



  int main(int argc, char *argv[])
{
    VideoWriter outputVideo;
    bool fourcc_on = true; //switch on / off different error
    if (fourcc_on)
        outputVideo.open("outVideo.avi", CV_FOURCC('H', '2', '6', '4'), 25, Size(100, 100), true);
    else
        outputVideo.open("outVideo.avi", -1, 25, Size(100, 100), true);

    if (!outputVideo.isOpened())
    {
        cout  << "Could not open the output video for write" << endl;
        return -1;
    }
    return 0;
}


  



  OpenCV Configuration :

  



  -- Detected version of GNU GCC: 46 (406)
-- Found OpenEXR: /usr/lib/libIlmImf.so
-- Looking for linux/videodev.h
-- Looking for linux/videodev.h - not found
-- Looking for linux/videodev2.h
-- Looking for linux/videodev2.h - found
-- Looking for sys/videoio.h
-- Looking for sys/videoio.h - not found
-- Looking for libavformat/avformat.h
-- Looking for libavformat/avformat.h - found
-- Looking for ffmpeg/avformat.h
-- Looking for ffmpeg/avformat.h - not found
-- Could NOT find JNI (missing:  JAVA_INCLUDE_PATH JAVA_INCLUDE_PATH2 JAVA_AWT_INCLUDE_PATH) 
-- 
-- General configuration for OpenCV 2.4.8 =====================================
--   Version control:               unknown
-- 
--   Platform:
--     Host:                        Linux 3.8.0-38-generic x86_64
--     CMake:                       2.8.7
--     CMake generator:             Unix Makefiles
--     CMake build tool:            /usr/bin/make
--     Configuration:               RELEASE
-- 
--   C/C++:
--     Built as dynamic libs?:      YES
--     C++ Compiler:                /usr/bin/c++  (ver 4.6)
--     C++ flags (Release):         -fsigned-char -W -Wall -Werror=return-type -Werror=address -Werror=sequence-point -Wformat -Werror=format-security -Wmissing-declarations -Wundef -Winit-self -Wpointer-arith -Wshadow -Wsign-promo -fdiagnostics-show-option -Wno-long-long -pthread -fomit-frame-pointer -msse -msse2 -msse3 -ffunction-sections -O3 -DNDEBUG  -DNDEBUG
--     C++ flags (Debug):           -fsigned-char -W -Wall -Werror=return-type -Werror=address -Werror=sequence-point -Wformat -Werror=format-security -Wmissing-declarations -Wundef -Winit-self -Wpointer-arith -Wshadow -Wsign-promo -fdiagnostics-show-option -Wno-long-long -pthread -fomit-frame-pointer -msse -msse2 -msse3 -ffunction-sections -g  -O0 -DDEBUG -D_DEBUG
--     C Compiler:                  /usr/bin/gcc
--     C flags (Release):           -fsigned-char -W -Wall -Werror=return-type -Werror=address -Werror=sequence-point -Wformat -Werror=format-security -Wmissing-declarations -Wmissing-prototypes -Wstrict-prototypes -Wundef -Winit-self -Wpointer-arith -Wshadow -fdiagnostics-show-option -Wno-long-long -pthread -fomit-frame-pointer -msse -msse2 -msse3 -ffunction-sections -O3 -DNDEBUG  -DNDEBUG
--     C flags (Debug):             -fsigned-char -W -Wall -Werror=return-type -Werror=address -Werror=sequence-point -Wformat -Werror=format-security -Wmissing-declarations -Wmissing-prototypes -Wstrict-prototypes -Wundef -Winit-self -Wpointer-arith -Wshadow -fdiagnostics-show-option -Wno-long-long -pthread -fomit-frame-pointer -msse -msse2 -msse3 -ffunction-sections -g  -O0 -DDEBUG -D_DEBUG
--     Linker flags (Release):      
--     Linker flags (Debug):        
--     Precompiled headers:         YES
-- 
--   OpenCV modules:
--     To be built:                 core flann imgproc highgui features2d calib3d ml video legacy objdetect photo gpu ocl nonfree contrib python stitching superres ts videostab
--     Disabled:                    world
--     Disabled by dependency:      -
--     Unavailable:                 androidcamera dynamicuda java
-- 
--   GUI: 
--     QT:                          NO
--     GTK+ 2.x:                    YES (ver 2.24.10)
--     GThread :                    YES (ver 2.32.4)
--     GtkGlExt:                    NO
--     OpenGL support:              NO
-- 
--   Media I/O: 
--     ZLib:                        /usr/lib/x86_64-linux-gnu/libz.so (ver 1.2.3.4)
--     JPEG:                        /usr/lib/x86_64-linux-gnu/libjpeg.so (ver )
--     PNG:                         /usr/lib/x86_64-linux-gnu/libpng.so (ver 1.2.46)
--     TIFF:                        /usr/lib/x86_64-linux-gnu/libtiff.so (ver 42 - 3.9.5)
--     JPEG 2000:                   /usr/lib/x86_64-linux-gnu/libjasper.so (ver 1.900.1)
--     OpenEXR:                     /usr/lib/libImath.so /usr/lib/libIlmImf.so /usr/lib/libIex.so /usr/lib/libHalf.so /usr/lib/libIlmThread.so (ver 1.6.1)
-- 
--   Video I/O:
--     DC1394 1.x:                  NO
--     DC1394 2.x:                  YES (ver 2.2.0)
--     FFMPEG:                      YES
--       codec:                     YES (ver 55.58.105)
--       format:                    YES (ver 55.37.101)
--       util:                      YES (ver 52.78.100)
--       swscale:                   YES (ver 2.6.100)
--       gentoo-style:              YES
--     GStreamer:                   
--       base:                      YES (ver 0.10.36)
--       app:                       YES (ver 0.10.36)
--       video:                     YES (ver 0.10.36)
--     OpenNI:                      NO
--     OpenNI PrimeSensor Modules:  NO
--     PvAPI:                       NO
--     GigEVisionSDK:               NO
--     UniCap:                      NO
--     UniCap ucil:                 NO
--     V4L/V4L2:                    Using libv4l (ver 1.0.1)
--     XIMEA:                       NO
--     Xine:                        NO
-- 
--   Other third-party libraries:
--     Use IPP:                     NO
--     Use Eigen:                   NO
--     Use TBB:                     NO
--     Use OpenMP:                  NO
--     Use GCD                      NO
--     Use Concurrency              NO
--     Use C=:                      NO
--     Use Cuda:                    NO
--     Use OpenCL:                  YES
-- 
--   OpenCL:
--     Version:                     dynamic
--     Include path:                /home/shixudongleo/Downloads/opencv-2.4.8/3rdparty/include/opencl/1.2
--     Use AMD FFT:                 NO
--     Use AMD BLAS:                NO
-- 
--   Python:
--     Interpreter:                 /usr/bin/python (ver 2.7.3)
--     Libraries:                   /usr/lib/libpython2.7.so
--     numpy:                       /usr/lib/python2.7/dist-packages/numpy/core/include (ver 1.6.1)
--     packages path:               lib/python2.7/dist-packages
-- 
--   Java:
--     ant:                         NO
--     JNI:                         NO
--     Java tests:                  NO
-- 
--   Documentation:
--     Build Documentation:         NO
--     Sphinx:                      NO
--     PdfLaTeX compiler:           /usr/bin/pdflatex
-- 
--   Tests and samples:
--     Tests:                       YES
--     Performance tests:           YES
--     C/C++ Examples:              NO
-- 
--   Install path:                  /usr/local
-- 
--   cvconfig.h is in:              /home/shixudongleo/Downloads/opencv-2.4.8/build
-- -----------------------------------------------------------------
-- 
-- Configuring done
-- Generating done
-- Build files have been written to: /home/XXX/Downloads/opencv-2.4.8/build


  



  FFMPEG

  



  ffmpeg is enable to support OpenCV and libx264 is enabled when compiling ffmpeg.
By using ffmpeg command line, libx264 is running normally.

  



  $ ffmpeg -i test.avi -vcodec libx264 test.mp4
ffmpeg -i test.avi -vcodec libx264 test.mp4 > ~/Downloads/ffmpeg_log.txt
ffmpeg version 2.2.git Copyright (c) 2000-2014 the FFmpeg developers
  built on Apr 24 2014 16:39:51 with gcc 4.6 (Ubuntu/Linaro 4.6.3-1ubuntu5)
  configuration: --enable-gpl --enable-libfaac --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libtheora --enable-libvorbis --enable-libx264 --enable-libxvid --enable-nonfree --enable-postproc --enable-version3 --enable-x11grab --enable-shared --enable-pic
  libavutil      52. 78.100 / 52. 78.100
  libavcodec     55. 58.105 / 55. 58.105
  libavformat    55. 37.101 / 55. 37.101
  libavdevice    55. 13.100 / 55. 13.100
  libavfilter     4.  4.100 /  4.  4.100
  libswscale      2.  6.100 /  2.  6.100
  libswresample   0. 18.100 /  0. 18.100
  libpostproc    52.  3.100 / 52.  3.100
Input #0, avi, from 'test.avi':
  Duration: 00:00:03.73, start: 0.000000, bitrate: 1757 kb/s
    Stream #0:0: Video: msvideo1 (CRAM / 0x4D415243), rgb555le, 320x240, 1781 kb/s, 15 tbr, 15 tbn, 15 tbc
    Metadata:
      title           : julius.avi Video #1
File 'test.mp4' already exists. Overwrite ? [y/N] y
No pixel format specified, yuv444p for H.264 encoding chosen.
Use -pix_fmt yuv420p for compatibility with outdated media players.
[libx264 @ 0x25d08e0] using cpu capabilities: none!
[libx264 @ 0x25d08e0] profile High 4:4:4 Predictive, level 1.2, 4:4:4 8-bit
[libx264 @ 0x25d08e0] 264 - core 142 - H.264/MPEG-4 AVC codec - Copyleft 2003-2014 - http://www.videolan.org/x264.html - options: cabac=1 ref=3 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=7 psy=1 psy_rd=1.00:0.00 mixed_ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=4 threads=12 lookahead_threads=1 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2 b_adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=15 scenecut=40 intra_refresh=0 rc_lookahead=40 rc=crf mbtree=1 crf=23.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00
Output #0, mp4, to 'test.mp4':
  Metadata:
    encoder         : Lavf55.37.101
    Stream #0:0: Video: h264 (libx264) ([33][0][0][0] / 0x0021), yuv444p, 320x240, q=-1--1, 15360 tbn, 15 tbc
    Metadata:
      title           : julius.avi Video #1
Stream mapping:
  Stream #0:0 -> #0:0 (msvideo1 -> libx264)
Press [q] to stop, [?] for help
frame=   56 fps=0.0 q=-1.0 Lsize=     321kB time=00:00:03.60 bitrate= 731.0kbits/s    
video:320kB audio:0kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: 0.409949%
[libx264 @ 0x25d08e0] frame I:3     Avg QP:15.36  size:  7975
[libx264 @ 0x25d08e0] frame P:38    Avg QP:26.05  size:  6230
[libx264 @ 0x25d08e0] frame B:15    Avg QP:28.25  size:  4418
[libx264 @ 0x25d08e0] consecutive B-frames: 46.4% 53.6%  0.0%  0.0%
[libx264 @ 0x25d08e0] mb I  I16..4:  1.4% 72.8% 25.8%
[libx264 @ 0x25d08e0] mb P  I16..4:  1.6%  5.7% 15.1%  P16..4:  7.6%  6.3%  7.4%  0.0%  0.0%    skip:56.3%
[libx264 @ 0x25d08e0] mb B  I16..4:  0.2%  1.0%  2.0%  B16..8: 13.3%  7.8%  8.7%  direct: 8.3%  skip:58.8%  L0:34.9% L1:36.6% BI:28.5%
[libx264 @ 0x25d08e0] 8x8 transform intra:37.7% inter:2.3%
[libx264 @ 0x25d08e0] coded y,u,v intra: 52.1% 42.1% 30.1% inter: 19.6% 9.2% 5.2%
[libx264 @ 0x25d08e0] i16 v,h,dc,p: 56% 17% 24%  2%
[libx264 @ 0x25d08e0] i8 v,h,dc,ddl,ddr,vr,hd,vl,hu: 10% 16% 68%  1%  1%  1%  1%  1%  1%
[libx264 @ 0x25d08e0] i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 19% 18% 28%  5%  6%  5%  7%  5%  6%
[libx264 @ 0x25d08e0] Weighted P-Frames: Y:31.6% UV:21.1%
[libx264 @ 0x25d08e0] ref P L0: 70.5%  9.0% 12.1%  6.5%  2.0%
[libx264 @ 0x25d08e0] ref B L0: 91.3%  8.7%
[libx264 @ 0x25d08e0] kb/s:700.56


  


• avformat/dashenc : Set VP9 codec string with profile, level and bitdepth

  23 avril 2018, par Karthick Jeyapal

  avformat/dashenc : Set VP9 codec string with profile, level and bitdepth
  Otherwise some versions of chrome browser returns "codec not supported" error
  

  • [DH] libavformat/dashenc.c