Recherche avancée

Sur d’autres sites (6890)

• Notes on Linux for Dreamcast

  23 février 2011, par Multimedia Mike — Sega Dreamcast, VP8

  I wanted to write down some notes about compiling Linux on Dreamcast (which I have yet to follow through to success). But before I do, allow me to follow up on my last post where I got Google’s libvpx library decoding VP8 video on the DC. Remember when I said the graphics hardware could only process variations of RGB color formats ? I was mistaken. Reading over some old documentation, I noticed that the DC’s PowerVR hardware can also handle packed YUV textures (UYVY, specifically) :

  
  
  

  The video looks pretty sharp in the small photo. Up close, less so, due to the low resolution and high quantization of the test vector combined with the naive chroma upscaling. For the curious, the grey box surrounding the image highlights the 256-square texture that the video frame gets plotted on. Texture dimensions have to be powers of 2.

  Notes on Linux for Dreamcast
  I’ve occasionally dabbled with Linux on my Dreamcast. There’s an ancient (circa 2001) distro based around a build of kernel 2.4.5 out there. But I wanted to try to get something more current compiled. Thus far, I have figured out how to cross compile kernels pretty handily but have been unsuccessful in making them run.

  Here are notes are the compilation portion :
  

  • kernel.org provides a very useful set of cross compiling toolchains
  • get the gcc 4.5.1 cross toolchain for SH-4 (the gcc 4.3.3 one won’t work because the binutils is too old ; it will fail to assemble certain instructions as described in this post)
  • working off of Linux kernel 2.6.37, edit the top-level Makefile ; find the ARCH and CROSS_COMPILE variables and set appropriately :

    ARCH ?= sh
    CROSS_COMPILE ?= /path/to/gcc-4.5.1-nolibc/sh4-linux/bin/sh4-linux-
    

  • $ make dreamcast_defconfig
  • $ make menuconfig ... if any changes to the default configuration are desired
  • manually edit arch/sh/Makefile, changing :

    cflags-$(CONFIG_CPU_SH4) := $(call cc-option,-m4,) \
            $(call cc-option,-mno-implicit-fp,-m4-nofpu)
    

    to :

    cflags-$(CONFIG_CPU_SH4) := $(call cc-option,-m4,) \
            $(call cc-option,-mno-implicit-fp)
    

    I.e., remove the '-m4-nofpu' option. According to the gcc man page, this will "Generate code for the SH4 without a floating-point unit." Why this is a default is a mystery since the DC’s SH-4 has an FPU and compilation fails when enabling this option.

  • On that note, I was always under the impression that the DC sported an SH-4 CPU with the model number SH7750. According to this LinuxSH wiki page as well as the Linux kernel help, it actually has an SH7091 variant. This photo of the physical DC hardware corroborates the model number.
  • $ make ... to build a Linux kernel for the Sega Dreamcast

  Running
  So I can compile the kernel but running the kernel (the resulting vmlinux ELF file) gives me trouble. The default kernel ELF file reports an entry point of 0x8c002000. Attempting to upload this through the serial uploading facility I have available to me triggers a system reset almost immediately, probably because that’s the same place that the bootloader calls home. I have attempted to alter the starting address via ’make menuconfig’ -> System type -> Memory management options -> Physical memory start address. This allows the upload to complete but it still does not run. It’s worth noting that the 2.4.5 vmlinux file from the old distribution can be executed when uploaded through the serial loader, and it begins at 0x8c210000.

• ffmpeg takes a while to start

  17 octobre 2020, par Suspended

  I have this command in python script, in a loop :

  


  ffmpeg -i somefile.mp4 -ss 00:03:12 -t 00:00:35 piece.mp4 -loglevel error -stats


  


  It cuts out pieces of input file (-i). Input filename, as well as start time (-ss) and length of the piece I cut out (-t) varies, so it reads number of mp4 files and cuts out number of pieces from each one. During execution of the script it might be called around 100 times. My problem is that each time before it starts, there is a delay of few seconds and it adds up to significant time. How can I get it to start immediately ?

  


  The script (process_videos.py) :
  

  


  import subprocess
import sys
import math
import time

class TF:
    """TimeFormatter class (TF).
This class' reason for being is to convert time in short
form, e.g. 1:33, 0:32, or 23 into long form accepted by
mp4cut function in bash, e.g. 00:01:22, 00:00:32, etc"""

def toLong(self, shrt):
    """Converts time to its long form"""
    sx = '00:00:00'
    ladd = 8 - len(shrt)
    n = sx[:ladd] + shrt
    return n

def toShort(self, lng):
    """Converts time to short form"""
    if lng[0] == '0' or lng[0] == ':':
        return self.toShort(lng[1:])
    else:
        return lng

def toSeconds(self, any_time):
    """Converts time to seconds"""
    if len(any_time) < 3:
        return int(any_time)
    tt = any_time.split(':')
    if len(any_time) < 6:            
        return int(tt[0])*60 + int(tt[1])
    return int(tt[0])*3600 + int(tt[1])*60 + int(tt[2])

def toTime(self, secsInt):
    """"""
    tStr = ''
    hrs, mins, secs = 0, 0, 0
    if secsInt >= 3600:
        hrs = math.floor(secsInt / 3600)
        secsInt = secsInt % 3600
    if secsInt >= 60:
        mins = math.floor(secsInt / 60)
        secsInt = secsInt % 60
    secs = secsInt
    return str(hrs).zfill(2) + ':' + str(mins).zfill(2) + ':' + str(secs).zfill(2)

def minus(self, t_start, t_end):
    """"""
    t_e = self.toSeconds(t_end)
    t_s = self.toSeconds(t_start)
    t_r = t_e - t_s
    hrs, mins, secs = 0, 0, 0
    if t_r >= 3600:
        hrs = math.floor(t_r / 3600)
        t_r = t_r - (hrs * 3600)
    if t_r >= 60:
        mins = math.floor(t_r / 60)
        t_r = t_r - (mins * 60)
    secs = t_r
    hrsf = str(hrs).zfill(2)
    minsf = str(mins).zfill(2)
    secsf = str(secs).zfill(2)
    t_fnl = hrsf + ':' + minsf + ':' + secsf
    return t_fnl

def go_main():
    tf = TF()
    vid_n = 0
    arglen = len(sys.argv)
    if arglen == 2:
        with open(sys.argv[1], 'r') as f_in:
            lines = f_in.readlines()
            start = None
            end = None
            cnt = 0
            for line in lines:
                if line[:5] == 'BEGIN':
                    start = cnt
                if line[:3] == 'END':
                    end = cnt
                cnt += 1
            if start == None or end == None:
                print('Invalid file format. start = {}, end = {}'.format(start,end))
                return
            else:
                lines_r = lines[start+1:end]
                del lines
                print('videos to process: {}'.format(len(lines_r)))
                f_out_prefix = ""
                for vid in lines_r:
                     vid_n += 1
                    print('\nProcessing video {}/{}'.format(vid_n, len(lines_r)))
                    f_out_prefix = 'v' + str(vid_n) + '-'
                    dat = vid.split('!')[1:3]
                    title = dat[0]
                    dat_t = dat[1].split(',')
                    v_pieces = len(dat_t)
                    piece_n = 0
                    video_pieces = []
                    cmd1 = "echo -n \"\" > tmpfile"
                    subprocess.run(cmd1, shell=True)                    
                    print('  new tmpfile created')
                    for v_times in dat_t:
                        piece_n += 1
                        f_out = f_out_prefix + str(piece_n) + '.mp4'
                        video_pieces.append(f_out)
                        print('  piece filename {} added to video_pieces list'.format(f_out))
                        v_times_spl = v_times.split('-')
                        v_times_start = v_times_spl[0]
                        v_times_end = v_times_spl[1]
                        t_st = tf.toLong(v_times_start)
                        t_dur = tf.toTime(tf.toSeconds(v_times_end) - tf.toSeconds(v_times_start))
                        cmd3 = ["ffmpeg", "-i", title, "-ss", t_st, "-t", t_dur, f_out, "-loglevel", "error", "-stats"]
                        print('  cutting out piece {}/{} - {}'.format(piece_n, len(dat_t), t_dur))
                        subprocess.run(cmd3)
                    for video_piece_name in video_pieces:
                        cmd4 = "echo \"file " + video_piece_name + "\" >> tmpfile"
                        subprocess.run(cmd4, shell=True)
                        print('  filename {} added to tmpfile'.format(video_piece_name))
                    vname = f_out_prefix[:-1] + ".mp4"
                    print('  name of joined file: {}'.format(vname))
                    cmd5 = "ffmpeg -f concat -safe 0 -i tmpfile -c copy joined.mp4 -loglevel error -stats"
                    to_be_joined = " ".join(video_pieces)
                    print('  joining...')
                    join_cmd = subprocess.Popen(cmd5, shell=True)
                    join_cmd.wait()
                    print('  joined!')
                    cmd6 = "mv joined.mp4 " + vname
                    rename_cmd = subprocess.Popen(cmd6, shell=True)
                    rename_cmd.wait()
                    print('  File joined.mp4 renamed to {}'.format(vname))
                    cmd7 = "rm " + to_be_joined
                    rm_cmd = subprocess.Popen(cmd7, shell=True)
                    rm_cmd.wait()
                    print('rm command completed - pieces removed')
                cmd8 = "rm tmpfile"
                subprocess.run(cmd8, shell=True)
                print('tmpfile removed')
                print('All done')
    else:
        print('Incorrect number of arguments')

############################
if __name__ == '__main__':
    go_main()


  


  process_videos.py is called from bash terminal like this :

  


  $ python process_videos.py video_data   


  


  video_data file has the following format :

  


  BEGIN
!first_video.mp4!3-23,55-1:34,2:01-3:15,3:34-3:44!
!second_video.mp4!2-7,12-44,1:03-1:33!
END


  


  My system details :

  


  System:    Host: snowflake Kernel: 5.4.0-52-generic x86_64 bits: 64 Desktop: Gnome 3.28.4
           Distro: Ubuntu 18.04.5 LTS
Machine:   Device: desktop System: Gigabyte product: N/A serial: N/A
Mobo:      Gigabyte model: Z77-D3H v: x.x serial: N/A BIOS: American Megatrends v: F14 date: 05/31/2012
CPU:       Quad core Intel Core i5-3570 (-MCP-) cache: 6144 KB 
           clock speeds: max: 3800 MHz 1: 1601 MHz 2: 1601 MHz 3: 1601 MHz 4: 1602 MHz
Drives:    HDD Total Size: 1060.2GB (55.2% used)
           ID-1: /dev/sda model: ST31000524AS size: 1000.2GB
           ID-2: /dev/sdb model: Corsair_Force_GT size: 60.0GB
Partition: ID-1: / size: 366G used: 282G (82%) fs: ext4 dev: /dev/sda1
           ID-2: swap-1 size: 0.70GB used: 0.00GB (0%) fs: swap dev: /dev/sda5
Info:      Processes: 313 Uptime: 16:37 Memory: 3421.4/15906.9MB Client: Shell (bash) inxi: 2.3.56


  


• "File doesn't exist" - streamio FFMPEG on screenshot after create method

  3 mai 2013, par dodgerogers747

  I have videos being directly uploaded to S3 using Amazon's CORS configuration. Videos are uploaded via a dedicated S3 form, once they have been uploaded successfully the URL of the video is appended to the @video.file hidden_field via javascript and then the video saves.

  I can't get this after_save method to work which takes a screenshot of the video and saves it to S3 via carrierwave after the video has been saved as a rails object. ( It was previously working using a carrierwave video upload instance )

  It errors out withErrno::ENOENT - No such file or directory - the file 'http://bucket-name.s3.amazonaws.com/uploads/video/file/secure-random-hex/video_name.m4v' does not exist: I have tried running this method as a class method to call it from the console but it always comes back with the same error, even though the video exists.

  My bucket is set to public, read and write. How come it doesn't think the file exists ?

  If anyone needs more code just shout, thanks in advance.

  application trace

  Started POST "/videos" for 127.0.0.1 at 2013-05-03 10:48:07 -0700
  
  Processing by VideosController#create as JS
  
    Parameters: {"utf8"=>"✓", "authenticity_token"=>"MAHxrVcmPDtVIMfDWZBwL0YnzaAaAe1PTGip5M4OVoY=", "video"=>{"user_id"=>"5", "file"=>"http://bucket-name.s3.amazonaws.com/uploads/video/file/secure-random-hex/video.m4v"}}
  
    User Load (0.3ms)  SELECT `users`.* FROM `users` WHERE `users`.`id` = 5 LIMIT 1
  
     (0.1ms)  BEGIN
  
    SQL (20.5ms)  INSERT INTO `videos` (`created_at`, `file`, `question_id`, `screenshot`, `updated_at`, `user_id`) VALUES ('2013-05-03 17:48:07', 'http://teebox-network.s3.amazonaws.com/uploads/video/file/secure-random-hex/video.m4v', NULL, NULL, '2013-05-03 17:48:07', 5)
  
     (44.0ms)  ROLLBACK
  
  Completed 500 Internal Server Error in 71ms
  
  
  
  Errno::ENOENT - No such file or directory - the file 'http://teebox-network.s3.amazonaws.com/uploads/video/file/secure-random-hex/video.m4v' does not exist:
  
    (gem) streamio-ffmpeg-0.9.0/lib/ffmpeg/movie.rb:10:in `initialize'
  
    app/models/video.rb:25:in `new'
  
    app/models/video.rb:25:in `take_screenshot'

  video.rb

    attr_accessible :user_id, :question_id, :file, :screenshot
  
    belongs_to :question
  
    belongs_to :user
  
  
  
    default_scope order('created_at DESC')
  
  
  
    after_create :take_screenshot
  
  
  
    mount_uploader :screenshot, ImageUploader
  
  
  
    validates_presence_of :user_id, :file
  
  
  
    def take_screenshot
  
      FFMPEG.ffmpeg_binary = '/opt/local/bin/ffmpeg'
  
      movie = FFMPEG::Movie.new("#{self.file}")
  
      self.screenshot = movie.screenshot("#{Rails.root}/public/uploads/tmp/screenshots/#{File.basename(self.file)}.jpg", seek_time: 2 )
  
      self.save!
  
    end

  videos/_form.html.erb

  <form action="http://bucket-name.s3.amazonaws.com" data-remote="true" class="direct-upload" enctype="multipart/form-data" method="post">
  
    <input type="hidden" />
  
    <input type="hidden" value="ACCESS_KEY" />
  
    <input type="hidden" value="public-read" />
  
    <input type="hidden" />
  
    <input type="hidden" />
  
    <input type="hidden" value="201" />
  
    <input type="file" />
  
  </form>
  
  
  
  &lt;%= form_for @video, html: { multipart: true, id: "new_video" }, remote: true do |f| %>
  
          &lt;% if @video.errors.any? %>
  
      <div>
  
      <h2>&lt;%= pluralize(@video.errors.count, "error") %> prohibited this post from being saved:</h2>
  
  
  
    <ul>
  
      &lt;% @video.errors.full_messages.each do |msg| %>
  
          <li>&lt;%= msg %></li>
  
          &lt;% end %>
  
      </ul>
  
      </div>
  
  &lt;% end %>
  
  
  
      &lt;%= f.hidden_field :user_id, value: current_user.id %>
  
      &lt;%= f.hidden_field :file %><br />
  
  
  
      &lt;% end %>

  ImageUploader

  class ImageUploader < CarrierWave::Uploader::Base
  
  
  
    include CarrierWave::RMagick
  
  
  
     include Sprockets::Helpers::RailsHelper
  
     include Sprockets::Helpers::IsolatedHelper
  
  
  
    storage :fog
  
  
  
    before :store, :remember_cache_id
  
    after :store, :delete_tmp_dir
  
  
  
      def cache_dir
  
        Rails.root.join('public/uploads/tmp/') 
  
      end
  
  
  
      def remember_cache_id(new_file)
  
        @cache_id_was = cache_id
  
      end
  
  
  
      def delete_tmp_dir(new_file)
  
        if @cache_id_was.present? && @cache_id_was =~ /\A[\d]{8}\-[\d]{4}\-[\d]+\-[\d]{4}\z/
  
          FileUtils.rm_rf(File.join(root, cache_dir, @cache_id_was))
  
        end
  
      end
  
  
  
    process resize_and_pad: [306, 150, '#000']
  
  
  
    def store_dir
  
      "uploads/#{model.class.to_s.underscore}/#{mounted_as}/#{model.id}"
  
    end
  
  
  
    def extension_white_list
  
      %w(jpg)
  
      # %w(ogg ogv 3gp mp4 m4v webm mov)
  
    end