Recherche avancée

Sur d’autres sites (5796)

• ffmpeg command line for capturing audio and video in 720p from decklink card using Windows 7

  29 octobre 2013, par Huron

  I am trying to capture audio and video from a blackmagic decklink capture card using Windows 7 @ 720p, but I cant seem to get the ffmpeg command line settings right.

  ffmpeg -list_devices true -f dshow -i dummy

  [dshow @ 02457a60] DirectShow video devices
  
  [dshow @ 02457a60]  "Blackmagic WDM Capture"
  
  [dshow @ 02457a60]  "Decklink Video Capture"
  
  [dshow @ 02457a60] DirectShow audio devices
  
  [dshow @ 02457a60]  "Decklink Audio Capture"

  ffmpeg -list_options true -f dshow -i video="Decklink Video Capture"

  [dshow @ 03c2ea20] DirectShow video device options
  
  [dshow @ 03c2ea20]  Pin "Capture"
  
  [dshow @ 03c2ea20]   pixel_format=uyvy422  min s=720x486 fps=29.97 max s=720x486 fps=29.97
  
  [dshow @ 03c2ea20]   pixel_format=uyvy422  min s=720x486 fps=23.976 max s=720x486 fps=23.976
  
  [dshow @ 03c2ea20]   pixel_format=uyvy422  min s=720x576 fps=25 max s=720x576 fps=25
  
  [dshow @ 03c2ea20]   pixel_format=uyvy422  min s=720x486 fps=59.9402 max s=720x486 fps=59.9402
  
  [dshow @ 03c2ea20]   pixel_format=uyvy422  min s=720x576 fps=50 max s=720x576 fps=50
  
  [dshow @ 03c2ea20]   pixel_format=uyvy422  min s=1920x1080 fps=23.976 max s=1920x1080 fps=23.976
  
  [dshow @ 03c2ea20]   pixel_format=uyvy422  min s=1920x1080 fps=24 max s=1920x1080 fps=24
  
  [dshow @ 03c2ea20]   pixel_format=uyvy422  min s=1920x1080 fps=25 max s=1920x1080 fps=25
  
  [dshow @ 03c2ea20]   pixel_format=uyvy422  min s=1920x1080 fps=29.97 max s=1920x1080 fps=29.97
  
  [dshow @ 03c2ea20]   pixel_format=uyvy422  min s=1920x1080 fps=30 max s=1920x1080 fps=30
  
  [dshow @ 03c2ea20]   pixel_format=uyvy422  min s=1280x720 fps=50 max s=1280x720fps=50
  
  [dshow @ 03c2ea20]   pixel_format=uyvy422  min s=1280x720 fps=59.9402 max s=1280x720 fps=59.9402
  
  [dshow @ 03c2ea20]   pixel_format=uyvy422  min s=1280x720 fps=60.0002 max s=1280x720 fps=60.0002

  ffmpeg -list_options true -f dshow -i audio="Decklink Audio Capture"

  [dshow @ 047fea20] DirectShow audio device options
  
  [dshow @ 047fea20]  Pin "Capture"
  
  [dshow @ 047fea20]   min ch=1 bits=16 rate= 48000 max ch=1 bits=16 rate= 48000
  
  [dshow @ 047fea20]   min ch=2 bits=16 rate= 48000 max ch=2 bits=16 rate= 48000
  
  [dshow @ 047fea20]   min ch=4 bits=16 rate= 48000 max ch=4 bits=16 rate= 48000
  
  [dshow @ 047fea20]   min ch=6 bits=16 rate= 48000 max ch=6 bits=16 rate= 48000
  
  [dshow @ 047fea20]   min ch=8 bits=16 rate= 48000 max ch=8 bits=16 rate= 48000
  
  [dshow @ 047fea20]   min ch=10 bits=16 rate= 48000 max ch=10 bits=16 rate= 48000
  
  [dshow @ 047fea20]   min ch=12 bits=16 rate= 48000 max ch=12 bits=16 rate= 48000
  
  [dshow @ 047fea20]   min ch=16 bits=16 rate= 48000 max ch=16 bits=16 rate= 48000

  This is the stream information for my current video/audio source, connected to the decklink card's hdmi port

  Stream #0:0: Video: rawvideo (UYVY / 0x59565955), uyvy422(tv), 1280x720, 59.94 tbr, 10000k tbn, 59.94 tbc
  
  Stream #0:1: Audio: pcm_s16le, 48000 Hz, stereo, s16, 1536 kb/s

  Ultimately I will need to display this video on screen. And simultaneously be able to start and stop recording, while the preview keeps playing.

  My idea was to use ffmpeg to capture the video and audio signal and transmit this to a network stream (eg 127.0.0.1:6666). Then use VLC player to display the stream (the preview). And ultimately start and/or stop another ffmpeg to save that same stream to disk.

  In my mind this works, but I am no audio/video expert so if anyone with more experience could help out, I would appreciate it.

  Update :

  I have been able to display the video using ffplay, with the following command :

  ffplay -f dshow -video_size 1280x720 -rtbufsize 702000k -framerate 60 -i video="Decklink Video Capture":audio="Decklink Audio Capture" -threads 2

  Next step is streaming it so I can view the stream (preview) with VLC.

  Tried to use this command :

  ffmpeg -f dshow -video_size 1280x720 -rtbufsize 702000k -framerate 60 -i video="Decklink Video Capture":audio="Decklink Audio Capture" -threads 2 -f mpegts rtp://127.0.0.1:6666?pkt_size=188?buffer_size=65535

  Which does not give any errors, so appears to work. But when I try to open the stream in VLC I get the following error :

  SDP required :
  A description in SDP format is required to receive the RTP stream. Note that rtp :// URIs cannot work with dynamic RTP payload format (65).

  After a bit of reading it seems I should not be streaming to rtp :// but rather to udp ://

  Command became :

  ffmpeg -f dshow -video_size 1280x720 -rtbufsize 702000k -framerate 60 -i video="Decklink Video Capture":audio="Decklink Audio Capture" -threads 2 -f mpegts udp://127.0.0.1:6666?pkt_size=188?buffer_size=65535

  And when I try to open it now in VLC I get no error, no warning, but also no video.

  Time for some more reading.

• x86inc : Utilize the shadow space on 64-bit Windows

  11 septembre 2013, par Henrik Gramner

  x86inc : Utilize the shadow space on 64-bit Windows
  Store XMM6 and XMM7 in the shadow space in functions that
  
  clobbers them. This way we don’t have to adjust the stack
  
  pointer as often, reducing the number of instructions as
  
  well as code size.
  Signed-off-by : Derek Buitenhuis <derek.buitenhuis@gmail.com>
  

  • [DBH] libavcodec/x86/fft.asm
  • [DBH] libavcodec/x86/h264_deblock.asm
  • [DBH] libavutil/x86/x86inc.asm

• Recursive ffmpeg batch script within Windows

  30 septembre 2013, par Tisch

  Complete change to the question !

  I now have the following script :

  @echo off
  
  REM keep a counter for files converted
  
  set /A nfile=0
  
  REM do not copy empty folders or any files
  
  @echo Copying directory structure from %0 to %1 ...
  
  xcopy /T %1 %2
  
  REM walk directory structure and convert each file in quiet mode
  
  for /R %1 %%v in (*.mp4, *.aac, *.flv, *.m4a, *.mp3) do (
  
      echo converting "%%~nxv" ...
  
      ffmpeg -v quiet -i "%%v" -vcodec libx264 "%2\%%~nv-converted.mp4"
  
      set /A nfile+=1
  
  )
  
  echo Done! Converted %nfile% file(s)

  Taken from : http://mostlybuggy.wordpress.com/2012/09/25/windows-batch-file-how-to-copy-and-convert-folders-recursively-with-ffmpeg/

  The videos are converting as expected when I run the following command :

  convert ..\..\folder ..\..\converted\

  However, the converted files end up in "converted" and not in their respective sub-folders.

  Any ideas ?