Recherche avancée

Sur d’autres sites (3882)

• FFmpeg continues to process after time specified at "-to"

  4 août 2020, par Yamahabest

  I have a video, where I want to cut a part from the beginning, and from the end. And I want to apply some fade ins/fade outs, and add some text.

  


  So, I came up with the following syntax :

  


  -ss 10 -to 40 
-i "D:\DATA\Software\VideoProcessor_Files\20171015 Zelhem Tandem Frans met Mirthe.MP4" 
-loop 1 -i "Input_Files\logo maurik large.png" 
-loop 1 -i "Input_Files\logo maurik small.png" 
-filter_complex "
    color=0x7F7F7F@0.95:1920x1080[grey_for_fade_out];
    [grey_for_fade_out]fade=t=out:st=12:d=2:alpha=1[grey_fade_out];
    [0:v][grey_fade_out]overlay[video_grey_fade_out];
    color=0x7F7F7F@0.95:1920x1080[grey_for_fade_in];
    [grey_for_fade_in]fade=t=in:st=37:d=2:alpha=1[grey_fade_in];
    [video_grey_fade_out][grey_fade_in]overlay[video_grey_fade_out_in];
    [1:v]fade=t=out:st=13:d=2:alpha=1[over];
    [over]scale=iw/1.5:-1[scaled];
    [video_grey_fade_out_in][scaled]overlay=(main_w-overlay_w)/2:(main_h-overlay_h)/10[video_grey_fade_out_in_logo];
    [1:v]fade=t=in:st=36:d=2:alpha=1[over2];
    [over2]scale=iw/1.5:-1[scaled2];
    [video_grey_fade_out_in_logo][scaled2]overlay=(main_w-overlay_w)/2:(main_h-overlay_h)/2[video_grey_fade_out_in_logo2];
    [2:v]colorchannelmixer=aa=0.5,fade=t=in:st=14:d=2:alpha=1,fade=t=out:st=35:d=2:alpha=1[over3];
    [over3]scale=iw/10:-1[scaled3];
    [video_grey_fade_out_in_logo2][scaled3]overlay=10:10[video_complete];
    [video_complete]drawtext=fontfile=Input_Files/Sansation-Bold.ttf:text='Tandemvlucht met Mirthe':fontsize=96:fontcolor=white:alpha='if(lt(t,11),1,(2-(t-11))/2)':x=(w-text_w)/2:y=((h-text_h)/2)+125,drawtext=fontfile=Input_Files/Sansation-Bold.ttf:text='Zeddam':fontsize=96:fontcolor=white:alpha='if(lt(t,11),1,(2-(t-11))/2)':x=(w-text_w)/2:y=((h-text_h)/2)+250,drawtext=fontfile=Input_Files/Sansation-Bold.ttf:text='4 augustus 2020':fontsize=96:fontcolor=white:alpha='if(lt(t,11),1,(2-(t-11))/2)':x=(w-text_w)/2:y=((h-text_h)/2)+375,drawtext=fontfile=Input_Files/Sansation-Bold.ttf:text='Ook een keer meevliegen?':fontsize=96:fontcolor=white:alpha='if(lt(t,37),0,(t-37)/2)':x=(w-text_w)/2:y=((h-text_h)/6),drawtext=fontfile=Input_Files/Sansation-Bold.ttf:text='Of bel 085 - 049 55 69':fontsize=96:fontcolor=white:alpha='if(lt(t,37),0,(t-37)/2)':x=(w-text_w)/2:y=((h-text_h)/2)+350"
-preset medium 
-crf 18 
-c:a copy 
-y ".\Output_Files\Video\Zeddam\2020-08-04\Mirthe\27ed390a-8497-4550-b93f-4f87d9f2c9f0\MP_Tandemvlucht met_Mirthe_Zeddam_2020-08-04.mp4"


  


  I am quite sure this has worked in the past, but now FFmpeg just keeps on processing endlessly. If I then stop the FFmpeg process, and look at the resulting file, I see that the last frame (of the end of the specified period) just keeps on duplicating.

  


  The drop counter in the console output of FFmpeg also starts increasing at the end of the specified period :

  


  frame=  987 fps= 15 q=-1.0 Lsize=   31357kB time=00:00:41.04 bitrate=6259.0kbits/s dup=0 drop=10 speed=0.644x


  


  I am kind of lost on why this doesn't work anymore. I might have upgraded the FFmpeg executable in the mean time. Maybe my syntax was/is not correct, but I believe it just worked.

  


  It has to be in the complex filter, because when I remove that, it works alright.
It is not in the drawtext part of the complex filter, because it still occurs when I remove that. And when I only do the drawtext, FFmpeg stops correctly at the specified time.

  


  I have tried this, but then it still occurs :

  


  -filter_complex "
    color=0x7F7F7F@0.95:1920x1080[grey_for_fade_out];
    [grey_for_fade_out]fade=t=out:st=12:d=2:alpha=1[grey_fade_out];
    [0:v][grey_fade_out]overlay[video_grey_fade_out];
    color=0x7F7F7F@0.95:1920x1080[grey_for_fade_in];
    [grey_for_fade_in]fade=t=in:st=37:d=2:alpha=1[grey_fade_in];
    [video_grey_fade_out][grey_fade_in]overlay"


  


  Also with this, it still occurs :

  


  -filter_complex "
    [1:v]fade=t=out:st=13:d=2:alpha=1[over];
    [over]scale=iw/1.5:-1[scaled];
    [0:v][scaled]overlay=(main_w-overlay_w)/2:(main_h-overlay_h)/10[video_grey_fade_out_in_logo];
    [1:v]fade=t=in:st=36:d=2:alpha=1[over2];
    [over2]scale=iw/1.5:-1[scaled2];
    [video_grey_fade_out_in_logo][scaled2]overlay=(main_w-overlay_w)/2:(main_h-overlay_h)/2[video_grey_fade_out_in_logo2];
    [2:v]colorchannelmixer=aa=0.5,fade=t=in:st=14:d=2:alpha=1,fade=t=out:st=35:d=2:alpha=1[over3];
    [over3]scale=iw/10:-1[scaled3];
    [video_grey_fade_out_in_logo2][scaled3]overlay=10:10"


  


  I just don't understand. All my fade-ins/-outs seem to be within the specified range :

  


  

  • fade=t=out:st=12:d=2 : start at 12 seconds, duration 2 seconds. This ends at 14 seconds, which is smaller than 40 seconds.

  


  • fade=t=in:st=37:d=2 : start at 37 seconds, duration 2 seconds. This ends at 39 seconds, which is smaller than 40 seconds.

  


  • fade=t=out:st=13:d=2 : start at 13 seconds, duration 2 seconds. This ends at 15 seconds, which is smaller than 40 seconds.

  


  • fade=t=in:st=36:d=2 : start at 36 seconds, duration 2 seconds. This ends at 38 seconds, which is smaller than 40 seconds.

  


  


  It is just like some sequence is not ended properly, which is causing FFmpeg to just continue.

  


• record long videos from multiple webcams with FFmpeg

  4 août 2020, par Nagamoto

  I am using

  


  ffmpeg -f dshow -vcodec mjpeg -t 6000 -rtbufsize 2.14748e+09  -video_size 1920x1080 -framerate 60 -i video=camID-0 -f dshow -vcodec mjpeg -t 6000 -rtbufsize 2.14748e+09  -video_size 1920x1080 -framerate 60 -i video=camID-1 -map 0  -c:v libx264 -preset ultrafast -y -r 30 fileName_0.mp4 -map 1  -c:v libx264 -preset ultrafast -y -r 30 fileName_1.mp4

  


  to record video from two webcams. Since the output will be compressed further down the line I am mostly concerned with quality and not losing frames. But after about 2min the real-time buffer is full :

  


  [dshow @ 00000221716edf80] real-time buffer [@device_pnp_\\?\usb#vid_15aa&pid_1555&mi_00#6&b8e4142&0&0000#{65e8773d-8f56-11d0-a3b9-00a0c9223196}\global] [video input] too full or near too full (75% of size: 2147480000 [rtbufsize parameter])! frame dropped!


  


  On the other hand capturing uncompressed video results in huge filesizes (1.3 TB for an hour) but encoding with the settings above the computer can't keep up.
Currently the webcams capture 60fps- which is not a must but I can't set them to anything lower.

  


  How can I record long video (max 1.5h) with good quality while keeping file-sizes manageable ?

  


  ffmpeg -f dshow -list_options true -i video="3.0 USB Camera"



ffmpeg version 4.3 Copyright (c) 2000-2020 the FFmpeg developers
  built with gcc 9.3.1 (GCC) 20200621
  configuration: --enable-gpl --enable-version3 --enable-sdl2 --enable-fontconfig --enable-gnutls --enable-iconv --enable-libass --enable-libdav1d --enable-libbluray --enable-libfreetype --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-libopus --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libsrt --enable-libtheora --enable-libtwolame --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxml2 --enable-libzimg --enable-lzma --enable-zlib --enable-gmp --enable-libvidstab --enable-libvmaf --enable-libvorbis --enable-libvo-amrwbenc --enable-libmysofa --enable-libspeex --enable-libxvid --enable-libaom --enable-libgsm --disable-w32threads --enable-libmfx --enable-ffnvcodec --enable-cuda-llvm --enable-cuvid --enable-d3d11va --enable-nvenc --enable-nvdec --enable-dxva2 --enable-avisynth --enable-libopenmpt --enable-amf
  libavutil      56. 51.100 / 56. 51.100
  libavcodec     58. 91.100 / 58. 91.100
  libavformat    58. 45.100 / 58. 45.100
  libavdevice    58. 10.100 / 58. 10.100
  libavfilter     7. 85.100 /  7. 85.100
  libswscale      5.  7.100 /  5.  7.100
  libswresample   3.  7.100 /  3.  7.100
  libpostproc    55.  7.100 / 55.  7.100
[dshow @ 000001f32953c380] DirectShow video device options (from video devices)
[dshow @ 000001f32953c380]  Pin "Capture" (alternative pin name "0")
[dshow @ 000001f32953c380]   vcodec=mjpeg  min s=1920x1080 fps=60.0002 max s=1920x1080 fps=60.0002
[dshow @ 000001f32953c380]   vcodec=mjpeg  min s=1920x1080 fps=60.0002 max s=1920x1080 fps=60.0002
[dshow @ 000001f32953c380]   vcodec=mjpeg  min s=1280x720 fps=60.0002 max s=1280x720 fps=60.0002
[dshow @ 000001f32953c380]   vcodec=mjpeg  min s=1280x720 fps=60.0002 max s=1280x720 fps=60.0002
[dshow @ 000001f32953c380]   vcodec=mjpeg  min s=640x480 fps=60.0002 max s=640x480 fps=60.0002
[dshow @ 000001f32953c380]   vcodec=mjpeg  min s=640x480 fps=60.0002 max s=640x480 fps=60.0002
[dshow @ 000001f32953c380]   pixel_format=yuyv422  min s=1920x1080 fps=60.0002 max s=1920x1080 fps=60.0002
[dshow @ 000001f32953c380]   pixel_format=yuyv422  min s=1920x1080 fps=60.0002 max s=1920x1080 fps=60.0002
[dshow @ 000001f32953c380]   pixel_format=yuyv422  min s=1280x720 fps=60.0002 max s=1280x720 fps=60.0002
[dshow @ 000001f32953c380]   pixel_format=yuyv422  min s=1280x720 fps=60.0002 max s=1280x720 fps=60.0002
[dshow @ 000001f32953c380]   pixel_format=yuyv422  min s=640x480 fps=60.0002 max s=640x480 fps=60.0002
[dshow @ 000001f32953c380]   pixel_format=yuyv422  min s=640x480 fps=60.0002 max s=640x480 fps=60.0002
video=3.0 USB Camera: Immediate exit requested


  


• Can't play mp4 video using html5 video tag

  7 août 2020, par John Doe

  I am trying to present an mp4 video (h264) using html5 :

  


  <video width="320" controls="controls">&#xA;            <source src="/home/nabil/FWork/hikvision/ch01_00000100068000101.mp4" type="video/mp4">&#xA;</source></video>&#xA;

  


  analyzing video codec with ffmpeg gives the following :

  


  ffprobe ch01_00000100068000101.mp4 
ffprobe version 2.8.17-0ubuntu0.1 Copyright (c) 2007-2020 the FFmpeg developers
  built with gcc 5.4.0 (Ubuntu 5.4.0-6ubuntu1~16.04.12) 20160609
  configuration: --prefix=/usr --extra-version=0ubuntu0.1 --build-suffix=-ffmpeg --toolchain=hardened --libdir=/usr/lib/x86_64-linux-gnu --incdir=/usr/include/x86_64-linux-gnu --cc=cc --cxx=g++ --enable-gpl --enable-shared --disable-stripping --disable-decoder=libopenjpeg --disable-decoder=libschroedinger --enable-avresample --enable-avisynth --enable-gnutls --enable-ladspa --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libflite --enable-libfontconfig --enable-libfreetype --enable-libfribidi --enable-libgme --enable-libgsm --enable-libmodplug --enable-libmp3lame --enable-libopenjpeg --enable-libopus --enable-libpulse --enable-librtmp --enable-libschroedinger --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libssh --enable-libtheora --enable-libtwolame --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx265 --enable-libxvid --enable-libzvbi --enable-openal --enable-opengl --enable-x11grab --enable-libdc1394 --enable-libiec61883 --enable-libzmq --enable-frei0r --enable-libx264 --enable-libopencv
  libavutil      54. 31.100 / 54. 31.100
  libavcodec     56. 60.100 / 56. 60.100
  libavformat    56. 40.101 / 56. 40.101
  libavdevice    56.  4.100 / 56.  4.100
  libavfilter     5. 40.101 /  5. 40.101
  libavresample   2.  1.  0 /  2.  1.  0
  libswscale      3.  1.101 /  3.  1.101
  libswresample   1.  2.101 /  1.  2.101
  libpostproc    53.  3.100 / 53.  3.100
Invalid UE golomb code
    Last message repeated 3 times
Input #0, mpeg, from 'ch01_00000100068000101.mp4':
  Duration: 00:09:27.33, start: 35024.106667, bitrate: 507 kb/s
    Stream #0:0[0x1e0]: Video: h264 (Baseline), yuv420p, 1280x720, 10 fps, 10 tbr, 90k tbn, 20 tbc


  


  a possible relevant detail is that playing the video using ubuntu's default video reader (ffmpeg in the background) doesn't show any video controls