Recherche avancée

Sur d’autres sites (11273)

• FPV-Camera Input in Black and White / losses Color on conversion with FFMPEG [closed]

  22 décembre 2023, par LyffLyff

  so we're working on our end-of-school project and it's an FPV-Drone with an Analogue Camera on it. Plan is to send the video feed to a Raspberry Pi running an RTMP-Server from where a Phone-Application can view the live Video of the camera.

  


  To convert this analogue Data from the camera we use a USB2.0 Grabber (this one).

  


  To create the RTMP Stream from the converted USB-Input we use FFMPEG with the following command :

  


  


  fmpeg -f v4l2 -input_format yuyv422 -i /dev/video0 -c:v libx264 -crf 20 -preset ultrafast -b:v 2000k -fflags nobuffer -rtmp_live live -f flv rtmp ://192.168.8.107:554/live/stream

  


  


  It works fine, but the main problems at the moment are :

  


  

  • the video is in Black and White
B&W Image Stream

  


  • the stream has a delay of 10-20s depending on the network

  


  


  When I'm using the official Software provided by the Reseller I had the same problem, but as soon as it set PAL/BDGHI in the Settings the colour was shown correctly :

  


  Settings and Color Image in official software

  


  the video is in Black and White

  


  Does anyone know what settings there are to correctly decode the feed from the Camera and send the video with the colour over RTMP ? I don't know if this is the right place to ask this question, but I'm running out of ideas and every single decoder I have tried apart from the ones I'm currently using does not work.

  


  Any help is greatly appreciated :)

  


• FFmpeg 5 C api codec : how many times will EOF be returned by the receiving end ?

  3 février 2024, par Guanyuming He

  Edit : I may have written my questions unclearly at first, so I rewrote them. Sorry if you had found my questions confusing.

  


  I'm new to FFmpeg api programming (I'm using version 5.1) and am learning from the documentation and official examples.

  


  In the documentation page about send/receive encoding and decoding API overview, end of stream situation is discussed briefly :

  


  


  End of stream situations. These require "flushing" (aka draining) the codec, as the codec might buffer multiple frames or packets internally for performance or out of necessity (consider B-frames). This is handled as follows :

  


  


  


  Instead of valid input, send NULL to the avcodec_send_packet() (decoding) or avcodec_send_frame() (encoding) functions. This will enter draining mode.
Call avcodec_receive_frame() (decoding)
or avcodec_receive_packet() (encoding) in a loop until AVERROR_EOF is returned. The functions will not return AVERROR(EAGAIN), unless you forgot to enter draining mode.
Before decoding can be resumed again, the codec has to be reset with avcodec_flush_buffers().

  


  


  As I understand it, when I get AVERROR_EOF, I have reached a special point where I need to drain buffered data from the codec and finally reset the codec with avcodec_flush_buffers(). Without doing it, I cannot continue decoding/encoding.

  


  Is my understanding correct ?

  


  If so, then I have some questions :

  


  

  1. How many times at most can EOF be returned by the receiving end during one complete process, for example, decoding ?

  


  2. If the answer to the first question is infinity, then : If I received an EOF from the receiving end when I already finished sending data (e.g. when after EOF is returned by av_read_frame()), how should I tell if it's really finished ? Here there is no return code only for indicating if the receiving is finished.

  


  3. The data returned from the receive_... functions during draining, should I take them as valid ?

  


  


  I might have found answers to those in the official examples, but I'm not sure if the answer is universally true. I noticed that in some official examples, like in transcode_aac.c, draining is only done for the first EOF reached, and then after the second one is received, it is regarded that there are really nothing left. Any data received during draining is also written to the final output.

  


  Am I correct on interpreting the example ? If so, can I say that the answer to question 1 is once, and the answer to question 3 is yes ?

  


  I appreciate your response and time in advance. :)

  


• mp4 video file with gps location

  4 mars 2017, par Charles Chay

  I had a understanding that there is no official support to insert gps location metadata into .mp4 files. However, I see a gps location metadata inserted into the video file while I was using my Sony Z2 with geotagging on. ffmpeg was able to detect the metadata after exporting the same file to my laptop. Anyone knows if there a new interface method or api declared for such purpose in andriod ndk ?