Recherche avancée

Médias (91)

Autres articles (79)

  • Demande de création d’un canal

    12 mars 2010, par

    En fonction de la configuration de la plateforme, l’utilisateur peu avoir à sa disposition deux méthodes différentes de demande de création de canal. La première est au moment de son inscription, la seconde, après son inscription en remplissant un formulaire de demande.
    Les deux manières demandent les mêmes choses fonctionnent à peu près de la même manière, le futur utilisateur doit remplir une série de champ de formulaire permettant tout d’abord aux administrateurs d’avoir des informations quant à (...)

  • Librairies et binaires spécifiques au traitement vidéo et sonore

    31 janvier 2010, par

    Les logiciels et librairies suivantes sont utilisées par SPIPmotion d’une manière ou d’une autre.
    Binaires obligatoires FFMpeg : encodeur principal, permet de transcoder presque tous les types de fichiers vidéo et sonores dans les formats lisibles sur Internet. CF ce tutoriel pour son installation ; Oggz-tools : outils d’inspection de fichiers ogg ; Mediainfo : récupération d’informations depuis la plupart des formats vidéos et sonores ;
    Binaires complémentaires et facultatifs flvtool2 : (...)

  • Support audio et vidéo HTML5

    10 avril 2011

    MediaSPIP utilise les balises HTML5 video et audio pour la lecture de documents multimedia en profitant des dernières innovations du W3C supportées par les navigateurs modernes.
    Pour les navigateurs plus anciens, le lecteur flash Flowplayer est utilisé.
    Le lecteur HTML5 utilisé a été spécifiquement créé pour MediaSPIP : il est complètement modifiable graphiquement pour correspondre à un thème choisi.
    Ces technologies permettent de distribuer vidéo et son à la fois sur des ordinateurs conventionnels (...)

Sur d’autres sites (7842)

  • Error trying to stream multiple files - Invalid data found when processing input

    14 avril 2020, par xybrek

    ffmpeg -re -stream_loop -1 -i mylist.txt -f mpegts -vcodec copy -acodec copy http://localhost:8081/yoursecret

    



    mylist.txt file contains :

    



    file 'out001.ts'
file 'out002.ts'


    



    up to out327.ts

    



    Here's the output of the above command :

    



    ffmpeg version git-2020-04-03-52523b6 Copyright (c) 2000-2020 the FFmpeg developers
  built with gcc 9.3.1 (GCC) 20200328
  configuration: --enable-gpl --enable-version3 --enable-sdl2 --enable-fontconfig --enable-gnutls --enable-iconv --enable-libass --enable-libdav1d --enable-libbluray --enable-libfreetype --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-libopus --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libsrt --enable-libtheora --enable-libtwolame --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxml2 --enable-libzimg --enable-lzma --enable-zlib --enable-gmp --enable-libvidstab --enable-libvmaf --enable-libvorbis --enable-libvo-amrwbenc --enable-libmysofa --enable-libspeex --enable-libxvid --enable-libaom --enable-libmfx --enable-ffnvcodec --enable-cuda-llvm --enable-cuvid --enable-d3d11va --enable-nvenc --enable-nvdec --enable-dxva2 --enable-avisynth --enable-libopenmpt --enable-amf
  libavutil      56. 42.102 / 56. 42.102
  libavcodec     58. 77.101 / 58. 77.101
  libavformat    58. 42.100 / 58. 42.100
  libavdevice    58.  9.103 / 58.  9.103
  libavfilter     7. 77.101 /  7. 77.101
  libswscale      5.  6.101 /  5.  6.101
  libswresample   3.  6.100 /  3.  6.100
  libpostproc    55.  6.100 / 55.  6.100
mylist.txt: Invalid data found when processing input


    



    However streaming individual files works :

    



    ffmpeg -re -stream_loop -1 -i out001.ts -f mpegts -vcodec copy -acodec copy http://localhost:8081/yoursecret


    



    I've also tried but also does not work :

    



    ffmpeg -re -stream_loop -1 -i <(for %%i in (*.ts) do @echo file '%%i') -f mpegts -vcodec copy -acodec copy http://localhost:8081/yoursecret


    


  • ffmpeg crashes on crossfades between 3 clips if 2 clips coming from same input file [closed]

    14 avril 2020, par Erik

    I observed that ffmpeg 4.2.2 (macOS) crashes in particular cases of crossfades between clips, if one clip comes from file 1.dv, and two clips are cut out of file 2.dv, as shown below :

    



    ffmpeg -f lavfi -i color=black:size=720x576:duration=11:rate=25 -i 1.dv -i 2.dv -filter_complex "\
    [1:v]trim=5:10,setpts=expr=PTS-STARTPTS,yadif,fade=alpha=1:d=2:st=3:type=out,setpts=expr=PTS-STARTPTS,fifo[s5];\
    [2:v]split=2[s7][s8];\
    [s7]trim=5:10,setpts=expr=PTS-STARTPTS,yadif,fade=alpha=1:d=2:type=in,fade=alpha=1:d=2:st=6:type=out,setpts=expr=PTS-STARTPTS+(3/TB),fifo[s15];\
    [s8]trim=12:17,setpts=expr=PTS-STARTPTS,yadif,fade=alpha=1:d=2:type=in,setpts=expr=PTS-STARTPTS+(6/TB),fifo[s22];\
    [0:v][s5]overlay=eof_action=repeat[s6];\
    [s6][s15]overlay=eof_action=repeat[s16];\
    [s16][s22]overlay=eof_action=repeat[s24];\
    [1:a]atrim=5:10,asetpts=expr=PTS-STARTPTS[s26];\
    [2:a]asplit=2[s27][s28];\
    [s27]atrim=5:10,asetpts=expr=PTS-STARTPTS[s30];\
    [s28]atrim=12:17,asetpts=expr=PTS-STARTPTS[s33];\
    [s26][s30]acrossfade=d=2[s31];\
    [s31][s33]acrossfade=d=2[s36]" \
     -map "[s24]" -map "[s36]" -ab 128k -acodec aac -crf 23 -movflags faststart -preset medium -tune film -vcodec libx264 -aspect 1024:576 out.mp4 -y


    



    The order makes a difference : if the two clips from 2.dv are used first and then the clip from 1.dv is appended, everything works fine. Also, if all clips are coming from different files.

    



    ffmpeg 3.4.6 (ubuntu 18.04) shows no issues in any case.

    



    A self-compiled ffmpeg version N-97322-gb1699f4 (commit 2020-04-13) works with short clips as above, but crashes if one of the two clips taken from 2.dv is getting longer. In my tests 1500 frames (64 sec) is OK, 1700 (68 sec) leads to a segmentation fault. That is, if you replace in the command line above :

    



      

    • [s7]trim=5:10... -> [s7]trim=0:68 and accordingly

      • 


    • [s27]atrim=5:10... -> [s27]atrim=0:68

      • 


    



    Interestingly, the length of the clip taken from 1.dv does not play a role.

    



    The ffmpeg output shows about 20 times :

    



    frame=    0 fps=0.0 q=0.0 size=       0kB time=00:00:00.00 bitrate=N/A speed=   0x  


    



    before it continues (seg fault case) :

    



    frame=    4 fps=0.3 q=0.0 size=       0kB time=00:00:00.00 bitrate=N/A speed=   0x    
frame=   24 fps=1.6 q=0.0 size=       0kB time=00:00:00.00 bitrate=N/A speed=   0x    
frame=   25 fps=1.5 q=0.0 size=       0kB time=00:00:00.00 bitrate=N/A speed=   0x    
frame=   34 fps=1.9 q=0.0 size=       0kB time=00:00:00.00 bitrate=N/A speed=   0x    
frame=   36 fps=2.0 q=0.0 size=       0kB time=00:00:00.00 bitrate=N/A speed=   0x    
frame=   39 fps=2.1 q=0.0 size=       0kB time=00:00:00.00 bitrate=N/A speed=   0x    
frame=   40 fps=2.0 q=0.0 size=       0kB time=00:00:00.00 bitrate=N/A speed=   0x    
frame=   40 fps=2.0 q=0.0 size=       0kB time=00:00:00.00 bitrate=N/A speed=   0x    
frame=   40 fps=1.9 q=0.0 size=       0kB time=00:00:00.00 bitrate=N/A speed=   0x    



    



    success case :

    



    frame=    5 fps=0.4 q=0.0 size=       0kB time=00:00:00.00 bitrate=N/A speed=   0x    
frame=   42 fps=3.2 q=28.0 size=       0kB time=00:00:00.00 bitrate=N/A speed=   0x    
frame=   53 fps=3.9 q=28.0 size=       0kB time=00:00:00.36 bitrate=   2.9kbits/s speed=0.0264x    
frame=   65 fps=4.6 q=28.0 size=       0kB time=00:00:00.84 bitrate=   1.2kbits/s speed=0.0594x 
...   


    



    Slightly older versions included in the newest MacOS builds from zeranoe.com (git-2020-04-13-59e3a9a) and evermeet.cx (N-97308-g14dd0a9057-tessus, from 2020-04-12) are working nicely - also on my production cases (longer clips).

    



    Any feedback would be appreciated !

    


  • ffmpeg stream recording : Invalid data found when processing input

    14 mai 2020, par uncommon_name

    I am trying to run this command :

    



    ffmpeg -re -i "playlist-78293.m3u8" -vcodec libx264 -vprofile baseline -g 30 -acodec aac -strict -2 -loglevel +trace -f flv rtmp://127.0.0.1:1902/live2/78293


    



    I get the Invalid data found when processing input error after running this.

    



    This is the output I get in console :

    



    ffmpeg version git-2020-05-01-39fb1e9 Copyright (c) 2000-2020 the FFmpeg developers
  built with gcc 9.3.1 (GCC) 20200328
  configuration: --enable-gpl --enable-version3 --enable-sdl2 --enable-fontconfig --enable-gnutls --enable-iconv --enable-libass --enable-libdav1d --enable-libbluray --enable-libfreetype --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-libopus --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libsrt --enable-libtheora --enable-libtwolame --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxml2 --enable-libzimg --enable-lzma --enable-zlib --enable-gmp --enable-libvidstab --enable-libvmaf --enable-libvorbis --enable-libvo-amrwbenc --enable-libmysofa --enable-libspeex --enable-libxvid --enable-libaom --disable-w32threads --enable-libmfx --enable-ffnvcodec --enable-cuda-llvm --enable-cuvid --enable-d3d11va --enable-nvenc --enable-nvdec --enable-dxva2 --enable-avisynth --enable-libopenmpt --enable-amf
  libavutil      56. 43.100 / 56. 43.100
  libavcodec     58. 82.100 / 58. 82.100
  libavformat    58. 42.101 / 58. 42.101
  libavdevice    58.  9.103 / 58.  9.103
  libavfilter     7. 80.100 /  7. 80.100
  libswscale      5.  6.101 /  5.  6.101
  libswresample   3.  6.100 /  3.  6.100
  libpostproc    55.  6.100 / 55.  6.100
Splitting the commandline.
Reading option '-re' ... matched as option 're' (read input at native frame rate) with argument '1'.
Reading option '-i' ... matched as input url with argument 'playlist-78293.m3u8'.
Reading option '-vcodec' ... matched as option 'vcodec' (force video codec ('copy' to copy stream)) with argument 'libx264'.
Reading option '-vprofile' ... matched as AVOption 'vprofile' with argument 'baseline'.
Reading option '-g' ... matched as AVOption 'g' with argument '30'.
Reading option '-acodec' ... matched as option 'acodec' (force audio codec ('copy' to copy stream)) with argument 'aac'.
Reading option '-strict' ...Routing option strict to both codec and muxer layer
 matched as AVOption 'strict' with argument '-2'.
Reading option '-loglevel' ... matched as option 'loglevel' (set logging level) with argument '+trace'.
Reading option '-f' ... matched as option 'f' (force format) with argument 'flv'.
Reading option 'rtmp://136.243.91.210:1902/live2/78293' ... matched as output url.
Finished splitting the commandline.
Parsing a group of options: global .
Applying option loglevel (set logging level) with argument +trace.
Successfully parsed a group of options.
Parsing a group of options: input url playlist-78293.m3u8.
Applying option re (read input at native frame rate) with argument 1.
Successfully parsed a group of options.
Opening an input file: playlist-78293.m3u8.
[NULL @ 0000026316afd700] Opening 'playlist-78293.m3u8' for reading
[file @ 0000026316afdec0] Setting default whitelist 'file,crypto,data'
[AVIOContext @ 0000026316b06100] Statistics: 32070 bytes read, 0 seeks
playlist-78293.m3u8: Invalid data found when processing input


    



    I simplified a part of the input file to present it here (for example the path part and the ts Urls) :

    



    #EXTM3U
#EXT-X-VERSION:3
#EXT-X-TARGETDURATION:6
#EXT-X-MEDIA-SEQUENCE:19981
#EXT-X-TWITCH-ELAPSED-SECS:39962.000
#EXT-X-TWITCH-TOTAL-SECS:39994.000
#EXT-X-DATERANGE:ID="1e265bc0de2e42cc8523222e6e9c8ba7",CLASS="twitch-assignment",START-DATE="2020-05-14T13:37:04.907Z",END-ON-NEXT=YES,X-TV-TWITCH-SERVING-ID="1e265bc0de2e42cc8523222e6e9c8ba7",X-TV-TWITCH-NODE="video-edge-18dbf4.jfk06",X-TV-TWITCH-CLUSTER="jfk06"
#EXT-X-DATERANGE:ID="source-1589462114",CLASS="twitch-stream-source",START-DATE="2020-05-14T13:15:14.907Z",END-ON-NEXT=YES,X-TV-TWITCH-STREAM-SOURCE="live"
#EXT-X-DATERANGE:ID="trigger-1589462114",CLASS="twitch-trigger",START-DATE="2020-05-14T13:15:14.907Z",END-ON-NEXT=YES,X-TV-TWITCH-TRIGGER-URL="**path**\playlist-78293.m3u8"
#EXT-X-PROGRAM-DATE-TIME:2020-05-14T13:38:00.907Z
#EXTINF:2.000,live
https://url.net/v1/segment/somestuff.ts


    



    I'm new to ffmpeg. So any help would be appreciated.

    


Navigation