
Recherche avancée
Médias (1)
-
MediaSPIP Simple : futur thème graphique par défaut ?
26 septembre 2013, par
Mis à jour : Octobre 2013
Langue : français
Type : Video
Autres articles (49)
-
Mise à disposition des fichiers
14 avril 2011, parPar défaut, lors de son initialisation, MediaSPIP ne permet pas aux visiteurs de télécharger les fichiers qu’ils soient originaux ou le résultat de leur transformation ou encodage. Il permet uniquement de les visualiser.
Cependant, il est possible et facile d’autoriser les visiteurs à avoir accès à ces documents et ce sous différentes formes.
Tout cela se passe dans la page de configuration du squelette. Il vous faut aller dans l’espace d’administration du canal, et choisir dans la navigation (...) -
Problèmes fréquents
10 mars 2010, parPHP et safe_mode activé
Une des principales sources de problèmes relève de la configuration de PHP et notamment de l’activation du safe_mode
La solution consiterait à soit désactiver le safe_mode soit placer le script dans un répertoire accessible par apache pour le site -
Gestion générale des documents
13 mai 2011, parMédiaSPIP ne modifie jamais le document original mis en ligne.
Pour chaque document mis en ligne il effectue deux opérations successives : la création d’une version supplémentaire qui peut être facilement consultée en ligne tout en laissant l’original téléchargeable dans le cas où le document original ne peut être lu dans un navigateur Internet ; la récupération des métadonnées du document original pour illustrer textuellement le fichier ;
Les tableaux ci-dessous expliquent ce que peut faire MédiaSPIP (...)
Sur d’autres sites (5151)
-
Stream webcam using ffmpeg/avconv to RTMP libx264 doesn't work
15 mars 2016, par Erez Posneri have been trying to stream my webcam to Ustream using RTMP.
using the standard command works great :
"avconv -f video4linux2 -r 25 -s 320x240 -i /dev/video0 -f flv rtmp ://host/pass"
but i encoutner a 15 seconds latency !
therefore i decided to compress the video using libx264.
i downloaded it and confirmed it is installed properly.
but when running this command :"avconv -f video4linux2 -r 25 -s 320x240 -i /dev/video0 -c:v libx264 -pix_fmt yuv420p-f flv rtmp ://host/pass"
on ffmpeg i get "Illegal instruction"
and under avconv it starts to stream but nothing is shown in Ustream channel.output from avconv command
avconv version 9.14-6:9.14-1rpi1rpi1, Copyright (c) 2000-2014 the
Libav developers
built on Jul 22 2014 15:08:12 with gcc 4.6 (Debian 4.6.3-14+rpi1)
[video4linux2 @ 0x709740] The driver changed the time per frame from 1/5 to 1/30
[video4linux2 @ 0x709740] Estimating duration from bitrate, this may
be inaccurate
Input #0, video4linux2, from '/dev/video0':
Duration: N/A, start: 5069.991764, bitrate: 36864 kb/s
Stream #0.0: Video: rawvideo, yuyv422, 320x240, 36864 kb/s, 1000k tbn, 30 tbc
[libx264 @ 0x70a9e0] using cpu capabilities: none!
[libx264 @ 0x70a9e0] profile High, level 1.2
[libx264 @ 0x70a9e0] 264 - core 130 r2282 1db4621 - H.264/MPEG-4 AVC
codec - Copyleft 2003-2013 - http://www.videolan.org/x264.html -
options: cabac=1 ref=3 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=7
psy=1 psy_rd=1.00:0.00 mixed_ref=1 me_range=16 chroma_me=1 trellis=1
8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=-2
threads=1 lookahead_threads=1 sliced_threads=0 nr=0 decimate=1
interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2
b_adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=2 keyint=250
keyint_min=5 scenecut=40 intra_refresh=0 rc_lookahead=40 rc=crf
mbtree=1 crf=23.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.25
aq=1:1.00
Output #0, flv, to
'rtmp:host/pass:
Metadata:
encoder : Lavf54.20.4
Stream #0.0: Video: libx264, yuv420p, 320x240, q=-1--1, 1k tbn, 5 tbc
Stream mapping:
Stream #0:0 -> #0:0 (rawvideo -> libx264)
Press ctrl-c to stop encoding
frame= 44 fps= 3 q=23.0 size= 26kB time=0.20
bitrate=1071.8kbits/s bits/swhat could be the problem ?
thank you in advanced -
Stream from MP4 file over RTSP with ffserver
25 octobre 2019, par sirlionI’m trying to stream a mp4 file over RTSP using ffserver with no luck so far. I just want to stream directly from the file, without feeding from ffmpeg (no transcoding involved). But I’ve made it work with mpg video.
Here is my ffserver config file :
Port 8090
BindAddress 0.0.0.0
MaxHTTPConnections 2000
MaxClients 1000
MaxBandwidth 500000
CustomLog -
NoDaemon
RTSPPort 7654
RTSPBindAddress 0.0.0.0
<stream>
Format rtp
File "/home/g/video_streaming/sample3-mpeg2.mpg"
</stream>
<stream>
Format rtp
File "/home/g/video.mp4"
</stream>When I launch ffserver, everything seems fine based on the log output :
$ ./dev/ffmpeg/ffserver -f ffserver-sample.conf
ffserver version N-45673-gd0c27e8 Copyright (c) 2000-2012 the FFmpeg developers
built on Oct 18 2012 10:36:52 with gcc 4.6 (Ubuntu/Linaro 4.6.3-1ubuntu5)
configuration:
libavutil 51. 76.100 / 51. 76.100
libavcodec 54. 66.100 / 54. 66.100
libavformat 54. 33.100 / 54. 33.100
libavdevice 54. 3.100 / 54. 3.100
libavfilter 3. 19.103 / 3. 19.103
libswscale 2. 1.101 / 2. 1.101
libswresample 0. 16.100 / 0. 16.100
Thu Oct 18 11:54:22 2012 Opening file '/home/g/video.mp4'
Thu Oct 18 11:54:22 2012 Opening file '/home/g/video.mp4'
Thu Oct 18 11:54:23 2012 Opening file '/home/g/video_streaming/sample3-mpeg2.mpg'
Thu Oct 18 11:54:23 2012 [mpeg @ 0x1dae3c0]max_analyze_duration 5000000 reached at 5005000
Thu Oct 18 11:54:23 2012 Opening file '/home/g/video_streaming/sample3-mpeg2.mpg'
Thu Oct 18 11:54:23 2012 [mpeg @ 0x1dae3c0]max_analyze_duration 5000000 reached at 5005000
Thu Oct 18 11:54:23 2012 FFserver started.Finally, if I run ffplay in order to test the server, everything works fine for the mpg file, but not for the mp4 :
$ ffplay rtsp://192.168.1.99:7654/test2-rtsp
ffplay version N-45656-g916352f Copyright (c) 2003-2012 the FFmpeg developers
built on Oct 17 2012 16:14:14 with gcc 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu5.1)
configuration:
libavutil 51. 76.100 / 51. 76.100
libavcodec 54. 66.100 / 54. 66.100
libavformat 54. 33.100 / 54. 33.100
libavdevice 54. 3.100 / 54. 3.100
libavfilter 3. 19.103 / 3. 19.103
libswscale 2. 1.101 / 2. 1.101
libswresample 0. 16.100 / 0. 16.100
rtsp://192.168.1.99:7654/test2-rtsp: Invalid data found when processing input
Server's output:
Thu Oct 18 11:57:51 2012 FFserver started.
Thu Oct 18 11:58:01 2012 192.168.1.101 - - [DESCRIBE] "rtsp://192.168.1.99:7654/test2-rtsp RTSP/1.0" 200 167
Segmentation fault (core dumped)I don’t really know what I could be missing. I’ve just read in the official doc that streaming from a file is kind of broken. Since I don’t really know if that’s up to date, I decided to give it a try here.
Any help or suggestions ? Alternatives ?
-
ffmpeg filter complex maybe too long from my script
8 novembre 2023, par icegeti am using ffmepg and filter complex to blend 2 png files for a exact time.
if i use a too long time (short commands working) then the output file has only 1kb and is not openable.


i have added here my code was is not working, can anybody helps me ?


i getting this back


code :


ffmpeg -loop 1 -t 0.2225 -i /tmp/a.png -loop 1 -t 0.2225 -i /tmp/b.png -s 640x480 -to 256 -c:v libx264 -pix_fmt yuv420p -filter_complex " \
[1:v][0:v]blend=all_expr='A*(if(gte(T,0.2225),1,T/0.2225))+B*(1-(if(gte(T,0.2225),1,T/0.2225)))'[b1v]; \
[0:v][1:v]blend=all_expr='A*(if(gte(T,0.2225),1,T/0.2225))+B*(1-(if(gte(T,0.2225),1,T/0.2225)))'[b2v]; \
[1:v][0:v]blend=all_expr='A*(if(gte(T,0.2225),1,T/0.2225))+B*(1-(if(gte(T,0.2225),1,T/0.2225)))'[b3v]; \
[0:v][1:v]blend=all_expr='A*(if(gte(T,0.2225),1,T/0.2225))+B*(1-(if(gte(T,0.2225),1,T/0.2225)))'[b4v]; \
[1:v][0:v]blend=all_expr='A*(if(gte(T,0.2225),1,T/0.2225))+B*(1-(if(gte(T,0.2225),1,T/0.2225)))'[b5v]; \
[0:v][1:v]blend=all_expr='A*(if(gte(T,0.2225),1,T/0.2225))+B*(1-(if(gte(T,0.2225),1,T/0.2225)))'[b6v]; \
[1:v][0:v]blend=all_expr='A*(if(gte(T,0.2225),1,T/0.2225))+B*(1-(if(gte(T,0.2225),1,T/0.2225)))'[b7v]; \
[0:v][1:v]blend=all_expr='A*(if(gte(T,0.2225),1,T/0.2225))+B*(1-(if(gte(T,0.2225),1,T/0.2225)))'[b8v]; \
[1:v][0:v]blend=all_expr='A*(if(gte(T,0.2225),1,T/0.2225))+B*(1-(if(gte(T,0.2225),1,T/0.2225)))'[b9v]; \
[0:v][1:v]blend=all_expr='A*(if(gte(T,0.2225),1,T/0.2225))+B*(1-(if(gte(T,0.2225),1,T/0.2225)))'[b10v]; \
[1:v][0:v]blend=all_expr='A*(if(gte(T,0.2225),1,T/0.2225))+B*(1-(if(gte(T,0.2225),1,T/0.2225)))'[b11v]; \
[0:v][1:v]blend=all_expr='A*(if(gte(T,0.2225),1,T/0.2225))+B*(1-(if(gte(T,0.2225),1,T/0.2225)))'[b12v]; \
...
[1:v][b988v][0:v][b989v][1:v][b990v][0:v][b991v][1:v][b992v][0:v][b993v][1:v][b994v][0:v][b995v][1:v][b996v][0:v][b997v][1:v][b998v][0:v][b999v][1:v][b1000v][0:v][b1001v][1:v][b1002v][0:v][b1003v][1:v][b1004v][0:v][b1005v][1:v][b1006v][0:v][b1007v][1:v][b1008v][0:v][b1009v][1:v][b1010v][0:v][b1011v][1:v][b1012v][0:v][b1013v][1:v][b1014v][0:v][b1015v][1:v][b1016v][0:v][b1017v][1:v][b1018v][0:v][b1019v][1:v][b1020v][0:v][b1021v][1:v][b1022v][0:v][b1023v][1:v][b1024v]
[0:v]concat=n=2049:v=1:a=0,format=yuv420p[v]" -map "[v]" /tmp/test.mp4



the output is then this :


...
 Stream #1:0 (png) -> concat:in2038:v0
 Stream #1:0 (png) -> concat:in2042:v0
 Stream #1:0 (png) -> concat:in2046:v0
 format -> Stream #0:0 (libx264)
Press [q] to stop, [?] for help
[libx264 @ 0x563a0f537380] using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2 AVX FMA3 BMI2 AVX2 AVX512
[libx264 @ 0x563a0f537380] profile High, level 3.0
[libx264 @ 0x563a0f537380] 264 - core 155 r2917 0a84d98 - H.264/MPEG-4 AVC codec - Copyleft 2003-2018 - http://www.videolan.org/x264.html - options: cabac=1 ref=3 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=7 psy=1 psy_rd=1.00:0.00 mixed_ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=-2 threads=6 lookahead_threads=1 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2 b_adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=25 scenecut=40 intra_refresh=0 rc_lookahead=40 rc=crf mbtree=1 crf=23.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00
Output #0, mp4, to '/tmp/test.mp4':
 Metadata:
 encoder : Lavf58.20.100
 Stream #0:0: Video: h264 (libx264) (avc1 / 0x31637661), yuv420p, 640x480, q=-1--1, 25 fps, 12800 tbn, 25 tbc (default)
 Metadata:
 encoder : Lavc58.35.100 libx264
 Side data:
 cpb: bitrate max/min/avg: 0/0/0 buffer size: 0 vbv_delay: -1
Getötet 3 fps=0.0 q=0.0 size= 0kB time=00:00:00.00 bitrate=N/A speed= 0x




i create the filter complex by php with a for loop for creating the final syntax for ffmpeg.


getting at the end of the command (debug log) :


[auto_scaler_2044 @ 0x560f0db26c40] w:640 h:480 fmt:pal8 sar:0/1 -> w:640 h:480 fmt:yuv420p sar:0/1 flags:0x2
[auto_scaler_2045 @ 0x560f144cf240] w:640 h:480 fmt:pal8 sar:0/1 -> w:640 h:480 fmt:yuv420p sar:0/1 flags:0x2
[Parsed_blend_1022 @ 0x560f19f96d00] [framesync @ 0x560f19f96e08] Selected 1/25 time base
[Parsed_blend_1022 @ 0x560f19f96d00] [framesync @ 0x560f19f96e08] Sync level 2
[auto_scaler_3071 @ 0x560f18cf8a40] w:640 h:480 fmt:pal8 sar:0/1 -> w:640 h:480 fmt:yuv420p sar:0/1 flags:0x2
[auto_scaler_2046 @ 0x560f0db27180] w:640 h:480 fmt:pal8 sar:0/1 -> w:640 h:480 fmt:yuv420p sar:0/1 flags:0x2
[auto_scaler_2047 @ 0x560f144d00c0] w:640 h:480 fmt:pal8 sar:0/1 -> w:640 h:480 fmt:yuv420p sar:0/1 flags:0x2
[Parsed_blend_1023 @ 0x560f19f97400] [framesync @ 0x560f19f97508] Selected 1/25 time base
[Parsed_blend_1023 @ 0x560f19f97400] [framesync @ 0x560f19f97508] Sync level 2
[auto_scaler_3072 @ 0x560f18cf90c0] w:640 h:480 fmt:pal8 sar:0/1 -> w:640 h:480 fmt:yuv420p sar:0/1 flags:0x2
[scaler_out_0_0 @ 0x560f1a625140] w:640 h:480 fmt:yuv420p sar:0/1 -> w:640 h:480 fmt:yuv420p sar:0/1 flags:0x4
[libx264 @ 0x560f19103180] using mv_range_thread = 40
[libx264 @ 0x560f19103180] using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2 AVX FMA3 BMI2 AVX2 AVX512
[libx264 @ 0x560f19103180] profile High, level 3.0
[libx264 @ 0x560f19103180] 264 - core 155 r2917 0a84d98 - H.264/MPEG-4 AVC codec - Copyleft 2003-2018 - http://www.videolan.org/x264.html - options: cabac=1 ref=3 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=7 psy=1 psy_rd=1.00:0.00 mixed_ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=-2 threads=6 lookahead_threads=1 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2 b_adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=25 scenecut=40 intra_refresh=0 rc_lookahead=40 rc=crf mbtree=1 crf=23.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00
Output #0, mp4, to '/tmp/test.mp4':
 Metadata:
 encoder : Lavf58.20.100
 Stream #0:0, 0, 1/12800: Video: h264 (libx264), 1 reference frame (avc1 / 0x31637661), yuv420p, 640x480, 0/1, q=-1--1, 25 fps, 12800 tbn, 25 tbc (default)
 Metadata:
 encoder : Lavc58.35.100 libx264
 Side data:
 cpb: bitrate max/min/avg: 0/0/0 buffer size: 0 vbv_delay: -1
Clipping frame in rate conversion by 0.000008
cur_dts is invalid (this is harmless if it occurs once at the start per stream)
cur_dts is invalid (this is harmless if it occurs once at the start per stream) 0x
cur_dts is invalid (this is harmless if it occurs once at the start per stream) 0x
cur_dts is invalid (this is harmless if it occurs once at the start per stream) 0x
Getötet



is that the problem ?


i have also tried with filter complex script, but the same error appears.


thank you so much


many greets iceget


if i use a shorter time (about 10 seconds) then its working fine. but when i add 100 or 256 seconds, then i getting only a 1kb mp4 file.


thank you