Recherche avancée

Sur d’autres sites (4904)

• FFMPEG Incredibly Slow On Windows Server 2016

  1er août 2019, par Ben Gardner

  I have a t2.small (2GB RAM, 1 vCPU) Amazon EC2 instance running a process using FFMPEG. It runs just fine ( 30 fps) on my computer (i7, 12GB RAM), but at around 2 fps on the server. Here’s the command :

  rescale_command = f'ffmpeg -i {srcVideo} -filter_complex \"scale={owidth}:{oheight}, setsar=1:1, pad={dim[0]}:{dim[1]}:{oofx}:{oofy}\" {destVideo}'

  I’ve tried uninstalling and reinstalling ffmpeg/ffprobe

  Edited per llogan’s request, I’ve also discovered that it’s relatively speedy towards the beginning (I’m rescaling 100 times over the course of the program) and slows down towards the end.

  It utilizes 100% of the CPU even from the beginning, though.

  Example command/output :
  ffmpeg -i media/8-1-2019/hi/dl-107.mp4 -filter_complex "scale=607:1080, setsar=1:1, pad=1920:1080:656:0" media/8-1-2019/hi/sl-107.mp4

  ffmpeg version 3.2 Copyright (c) 2000-2016 the FFmpeg developers
  
    built with gcc 5.4.0 (GCC)
  
    configuration: --enable-gpl --enable-version3 --disable-w32threads --enable-dxva2 --enable-libmfx --enable-nvenc --enable-avisynth --enable-bzlib --enable-libebur128 --enable-fontconfig --enable-frei0r --enable-gnutls --enable-iconv --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libfreetype --enable-libgme --enable-libgsm --enable-libilbc --enable-libmodplug --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenh264 --enable-libopenjpeg --enable-libopus --enable-librtmp --enable-libschroedinger --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvo-amrwbenc --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxavs --enable-libxvid --enable-libzimg --enable-lzma --enable-decklink --enable-zlib
  
    libavutil      55. 34.100 / 55. 34.100
  
    libavcodec     57. 64.100 / 57. 64.100
  
    libavformat    57. 56.100 / 57. 56.100
  
    libavdevice    57.  1.100 / 57.  1.100
  
    libavfilter     6. 65.100 /  6. 65.100
  
    libswscale      4.  2.100 /  4.  2.100
  
    libswresample   2.  3.100 /  2.  3.100
  
    libpostproc    54.  1.100 / 54.  1.100
  
  Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'media/8-1-2019/hi/dl-107.mp4':
  
    Metadata:
  
      minor_version   : 512
  
      major_brand     : isom
  
      compatible_brands: isomiso2avc1mp41
  
      comment         : vid:v09044ce0000bks3802jqrog167l3rf0
  
      encoder         : Lavf58.20.100
  
    Duration: 00:00:15.12, start: 0.000000, bitrate: 1046 kb/s
  
      Stream #0:0(und): Video: h264 (High) (avc1 / 0x31637661), yuv420p, 540x960 [SAR 1:1 DAR 9:16], 972 kb/s, 29.97 fps, 29.97 tbr, 30k tbn, 59.94 tbc (default)
  
      Metadata:
  
        handler_name    : VideoHandler
  
      Stream #0:1(und): Audio: aac (LC) (mp4a / 0x6134706D), 44100 Hz, stereo, fltp, 64 kb/s (default)
  
      Metadata:
  
        handler_name    : SoundHandler
  
  [Parsed_setsar_1 @ 00000000023ac840] num:den syntax is deprecated, please use num/den or named options instead
  
  [Parsed_setsar_1 @ 00000000023ad2c0] num:den syntax is deprecated, please use num/den or named options instead
  
  [libx264 @ 00000000023ad800] using SAR=1/1
  
  [libx264 @ 00000000023ad800] using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2 AVX FMA3 AVX2 LZCNT BMI2
  
  [libx264 @ 00000000023ad800] profile High, level 4.0
  
  [libx264 @ 00000000023ad800] 264 - core 148 r2721 72d53ab - H.264/MPEG-4 AVC codec - Copyleft 2003-2016 - http://www.videolan.org/x264.html - options: cabac=1 ref=3 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=7 psy=1 psy_rd=1.00:0.00 mixed_ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=-2 threads=1 lookahead_threads=1 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2 b_adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=25 scenecut=40 intra_refresh=0 rc_lookahead=40 rc=crf mbtree=1 crf=23.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00
  
  Output #0, mp4, to 'media/8-1-2019/hi/sl-107.mp4':
  
    Metadata:
  
      minor_version   : 512
  
      major_brand     : isom
  
      compatible_brands: isomiso2avc1mp41
  
      comment         : vid:v09044ce0000bks3802jqrog167l3rf0
  
      encoder         : Lavf57.56.100
  
      Stream #0:0: Video: h264 (libx264) ([33][0][0][0] / 0x0021), yuv420p, 1920x1080 [SAR 1:1 DAR 16:9], q=-1--1, 29.97 fps, 30k tbn, 29.97 tbc (default)
  
      Metadata:
  
        encoder         : Lavc57.64.100 libx264
  
      Side data:
  
        cpb: bitrate max/min/avg: 0/0/0 buffer size: 0 vbv_delay: -1
  
      Stream #0:1(und): Audio: aac (LC) ([64][0][0][0] / 0x0040), 44100 Hz, stereo, fltp, 128 kb/s (default)
  
      Metadata:
  
        handler_name    : SoundHandler
  
        encoder         : Lavc57.64.100 aac
  
  Stream mapping:
  
    Stream #0:0 (h264) -> scale (graph 0)
  
    pad (graph 0) -> Stream #0:0 (libx264)
  
    Stream #0:1 -> #0:1 (aac (native) -> aac (native))
  
  Press [q] to stop, [?] for help
  
  frame=  453 fps=3.6 q=29.0 Lsize=    3016kB time=00:00:15.01 bitrate=1645.7kbits/s speed=0.12x
  
  video:2763kB audio:237kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: 0.576820%
  
  [libx264 @ 00000000023ad800] frame I:6     Avg QP:20.93  size: 38467
  
  [libx264 @ 00000000023ad800] frame P:118   Avg QP:23.12  size: 11624
  
  [libx264 @ 00000000023ad800] frame B:329   Avg QP:25.19  size:  3725
  
  [libx264 @ 00000000023ad800] consecutive B-frames:  1.8%  2.6%  4.6% 90.9%
  
  [libx264 @ 00000000023ad800] mb I  I16..4: 16.4% 76.7%  6.9%
  
  [libx264 @ 00000000023ad800] mb P  I16..4:  2.3%  5.8%  0.9%  P16..4:  9.8%  3.8%  1.6%  0.0%  0.0%    skip:75.7%
  
  [libx264 @ 00000000023ad800] mb B  I16..4:  0.4%  0.7%  0.1%  B16..8:  9.5%  1.6%  0.3%  direct: 0.6%  skip:86.8%  L0:43.0% L1:50.8% BI: 6.2%
  
  [libx264 @ 00000000023ad800] 8x8 transform intra:67.4% inter:78.3%
  
  [libx264 @ 00000000023ad800] coded y,uvDC,uvAC intra: 32.5% 40.1% 9.4% inter: 2.7% 3.9% 0.1%
  
  [libx264 @ 00000000023ad800] i16 v,h,dc,p: 50% 25%  6% 19%
  
  [libx264 @ 00000000023ad800] i8 v,h,dc,ddl,ddr,vr,hd,vl,hu: 38% 11% 27%  3%  3%  5%  3%  6%  3%
  
  [libx264 @ 00000000023ad800] i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 43% 11% 12%  5%  7%  9%  4%  7%  3%
  
  [libx264 @ 00000000023ad800] i8c dc,h,v,p: 62% 11% 22%  5%
  
  [libx264 @ 00000000023ad800] Weighted P-Frames: Y:0.0% UV:0.0%
  
  [libx264 @ 00000000023ad800] ref P L0: 64.4% 14.3% 16.1%  5.2%
  
  [libx264 @ 00000000023ad800] ref B L0: 90.6%  7.5%  2.0%
  
  [libx264 @ 00000000023ad800] ref B L1: 97.7%  2.3%
  
  [libx264 @ 00000000023ad800] kb/s:1496.84
  
  [aac @ 0000000000628120] Qavg: 754.761

• swscale/aarch64 : use multiply accumulate and shift-right narrow

  9 décembre 2019, par Sebastian Pop

  swscale/aarch64 : use multiply accumulate and shift-right narrow
  This patch rewrites the innermost loop of ff_yuv2planeX_8_neon to avoid zips and
  
  horizontal adds by using fused multiply adds. The patch also uses ld1r to load
  
  one element and replicate it across all lanes of the vector. The patch also
  
  improves the clipping code by removing the shift right instructions and
  
  performing the shift with the shift-right narrow instructions.
  I see 8% difference on an m6g instance with neoverse-n1 CPUs :
  
  $ ffmpeg -nostats -f lavfi -i testsrc2=4k:d=2 -vf bench=start,scale=1024x1024,bench=stop -f null -
  
  before : t:0.014015 avg:0.014096 max:0.015018 min:0.013971
  
  after :  t:0.012985 avg:0.013013 max:0.013996 min:0.012818
  Tested with `make check` on aarch64-linux.
  Signed-off-by : Sebastian Pop <spop@amazon.com>
  
  Reviewed-by : Clément Bœsch <u@pkh.me>
  
  Signed-off-by : Michael Niedermayer <michael@niedermayer.cc>
  

  • [DH] libswscale/aarch64/output.S

• Reason for write EPIPE error in my implementation ?

  25 mai 2019, par Chrisl446

  I currently have a small node.js express application for uploading images using sharp & thumbnails created from .mp4 videos using simple-thumbnail package/ffmpeg.

  The app works perfectly when uploading an image, the file is uploaded sharp processes it, then passes it along and it ends up in my amazon s3 bucket as expected. No errors what so ever.

  However, when I upload an mp4 video that I use to create and upload a thumbnail from by using simple-thumbnails genThumbnail() function, which uses ffmpeg child process, the thumbnail uploads successully to my s3 bucket, HOWEVER my app returns an EPIPE write error and NOT the url of the uploaded files url on S3.

  What is causing this and how can I fix it, considering it’s pretty much working aside from the EPIPE error that is being returned ? Thanks ahead !

  The packages of concern used are as follows :

  aws-sdk

  multer

  multer-s3 <- this one with the transform option, not the standard multer-s3 package

  simple-thumbnail

  const express = require('express');
  
  const app = express();
  
  
  
  const aws = require('aws-sdk');
  
  const multer = require('multer');
  
  const multerS3 = require('multer-s3'); //github:gmenih341/multer-s3 version of multer-s3 with transform option
  
  const sharp = require('sharp');
  
  const genThumbnail = require('simple-thumbnail');
  
  
  
  app.use((req, res, next) => {
  
      res.header('Access-Control-Allow-Origin', '*');
  
      res.header('Access-Control-Allow-Headers', 'Orgin, X-Requested-With, Content-Type, Accept, Authorization');
  
      if (req.method === 'OPTIONS') {
  
          res.header('Access-Control-Allow-Methods', 'POST');
  
          return res.status(200).json({});
  
      }
  
      next();
  
  });
  
  
  
  let uniqueFileName;
  
  let s3BucketName = 'bucketname';
  
  
  
  let s3 = new aws.S3({
  
      accessKeyId: ACCESS_KEY,
  
      secretAccessKey: SECRET_KEY,
  
      Bucket: s3BucketName
  
  });
  
  
  
  let upload = multer({
  
      storage: multerS3({
  
          s3: s3,
  
          bucket: s3BucketName,
  
          acl: 'public-read',
  
          cacheControl: 'max-age=31536000',
  
          contentType: multerS3.AUTO_CONTENT_TYPE,
  
          shouldTransform: true,
  
          transforms: [{
  
              id: 'thumbnail',
  
              key: function (req, file, cb) {
  
                  uniqueFileName = Date.now().toString();
  
                  cb(null, uniqueFileName + '.jpg')
  
              },
  
              transform: function (req, file, cb) {
  
                  if (file.mimetype == 'video/mp4') {
  
                      //When using simple-thumbnails' getThumbnail() on an mp4 video it uploads succesfully to S3 but node returns EPIPE write error
  
                      cb(null, genThumbnail(null, null, '250x?'))
  
                  } else {
  
                      //When using sharp to resize an image this works perfectly and retuns the JSON below with the files S3 URL
  
                      cb(null, sharp().jpeg())
  
                  }
  
  
  
              }
  
          }]
  
      })
  
  });
  
  
  
  app.post('/upload', upload.array('theFile'), (req, res) => {
  
      res.json({
  
          fileS3Url: 'https://s3.amazonaws.com/'+ s3BucketName +'/' + uniqueFileName
  
      });
  
  });
  
  
  
  app.use((req, res, next) => {
  
      const error = new Error('Not found');
  
      error.status = 404;
  
      next(error);
  
  });
  
  
  
  app.use((error, req, res, next) => {
  
      res.status(error.status || 500);
  
      res.json({
  
          error: {
  
              message: error.message
  
          }
  
      });
  
  });
  
  
  
  module.exports = app;