Recherche avancée

Sur d’autres sites (5277)

• No sound when running ffmpeg on youtube live

  28 mai 2020, par Bartonsen

  Despite my limited knowledge in ffmpeg, I've managed to livestream my birdbox camera to youtube using ffmpeg running on a raspberry pi. The camera has also audio and by using local vlc in windows with rtsp, the audio is ok.

  



  However, on youtube there is no sound (same rtsp command as used locally in windows), and I see this "warning" in youtube studio : "The current bitrate (0) of the audio stream is lower than the recommended bitrate. We recommend using a 128 Kbps bitrate for the audio stream."

  



  How can I get the sound through youtube ?
This is the command I run. The command was found on the net, and I adopted it for my usage, and got video working straight away :

  



  pi@raspberrypi:~ $ ffmpeg -f lavfi -i anullsrc -thread_queue_size 512 -rtsp_transport udp -i "rtsp://10.x.x.x:554/user=user&password=password&channel=1&stream=0.sdp?real_stream" -tune zerolatency -vcodec libx264 -use_wallclock_as_timestamps 1 -pix_fmt + -c:v copy -c:a aac -strict experimental -f flv rtmp://a.rtmp.youtube.com/live2/mykey
ffmpeg version git-2020-05-01-3c740f2 Copyright (c) 2000-2020 the FFmpeg developers
  built with gcc 6.3.0 (Raspbian 6.3.0-18+rpi1+deb9u1) 20170516
  configuration: --arch=armel --target-os=linux --enable-gpl --enable-libx264 --enable-nonfree
  libavutil      56. 43.100 / 56. 43.100
  libavcodec     58. 82.100 / 58. 82.100
  libavformat    58. 42.102 / 58. 42.102
  libavdevice    58.  9.103 / 58.  9.103
  libavfilter     7. 80.100 /  7. 80.100
  libswscale      5.  6.101 /  5.  6.101
  libswresample   3.  6.100 /  3.  6.100
  libpostproc    55.  6.100 / 55.  6.100
Input #0, lavfi, from 'anullsrc':
  Duration: N/A, start: 0.000000, bitrate: 705 kb/s
    Stream #0:0: Audio: pcm_u8, 44100 Hz, stereo, u8, 705 kb/s
Guessed Channel Layout for Input Stream #1.1 : mono
Input #1, rtsp, from 'rtsp://10.x.x.x:554/user=user&password=password&channel=1&stream=0.sdp?real_stream':
  Metadata:
    title           : RTSP Session
  Duration: N/A, start: 0.000000, bitrate: N/A
    Stream #1:0: Video: h264 (Main), yuvj420p(pc, bt709, progressive), 1920x1080, 20 fps, 20 tbr, 90k tbn, 180k tbc
    Stream #1:1: Audio: pcm_alaw, 8000 Hz, mono, s16, 64 kb/s
Multiple -c, -codec, -acodec, -vcodec, -scodec or -dcodec options specified for stream 0, only the last option '-c:v copy' will be used.
Stream mapping:
  Stream #1:0 -> #0:0 (copy)
  Stream #0:0 -> #0:1 (pcm_u8 (native) -> aac (native))
Press [q] to stop, [?] for help
Output #0, flv, to 'rtmp://a.rtmp.youtube.com/live2/mykey':
  Metadata:
    encoder         : Lavf58.42.102
    Stream #0:0: Video: h264 (Main) ([7][0][0][0] / 0x0007), yuvj420p(pc, bt709, progressive), 1920x1080, q=2-31, 20 fps, 20 tbr, 1k tbn, 90k tbc
    Stream #0:1: Audio: aac (LC) ([10][0][0][0] / 0x000A), 44100 Hz, stereo, fltp, 128 kb/s
    Metadata:
      encoder         : Lavc58.82.100 aac
[flv @ 0x2c43750] Timestamps are unset in a packet for stream 0. This is deprecated and will stop working in the future. Fix your code to set the timestamps properly


  


• FFMPEG Transcode H265 video from 10-bit to 8-bit

  6 juin 2020, par Zach

  I'm trying to convert my library from various formats into HEVC 8-bit mainly to shrink my library down. This is generally working but I've run into an issue when trying to convert an existing file from 10-bit H.265 to 8-bit H.265.

  



  My processor, an Intel Celeron J3455, supports hardware decoding/encoding H.265 at 8-bit but only hardware decoding for 10-bit.

  



  It seems that ffmpeg is attempting to keep the video as 10-bit to match the source rather than allowing me to convert to 8-bit and this is creating an error.

  



  Here is a sample command that I'm using :

  



  ffmpeg -hwaccel vaapi -hwaccel_device /dev/dri/renderD128 -hwaccel_output_format vaapi -i input.10bit.x265.mkv -map 0:0 -c:v:0 hevc_vaapi -vf "scale_vaapi=w=-1:h=1080" -b:v 4027047 -map 0:1 -c:a:0 aac -b:a 384000 -ac 6 -map 0:s -scodec copy -map_metadata:g -1 -metadata JBDONEVERSION=1 -metadata JBDONEDATE=2020-06-06T20:52:36.072Z -map_chapters 0 output.8bit.x265.mkv

  



  The error I get is :

  



  [hevc_vaapi @ 0x5568b27fb1c0] No usable encoding entrypoint found for profile VAProfileHEVCMain10 (18).

Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height


  



  From what I can tell ffmpeg looks at the source and selectes VAProfileHEVCMain10 instead of VAProfileHEVCMain. I'd like to force it to output 8-bit.

  



  I've tried adding -pix_fmt yuv420p but that gives me this error :

  



  Incompatible pixel format 'yuv420p' for codec 'hevc_vaapi', auto-selecting format 'vaapi_vld' 


  



  I've also tried making this change to the command : "scale_vaapi=w=-1:h=1080,format=yuv420p"

  



  However that gives me the error :

  



  Impossible to convert between the formats supported by the filter 'Parsed_scale_vaapi_0' and the filter 'auto_scaler_0'

Error reinitializing filters!


  



  Any suggestions ?

  


• Nodejs - ffmpeg - unable to live convert webcam to hls file

  26 mai 2020, par Jeff55

  Okay so long story short : I need to be able to accept a video stream from my usb port and offer this up to my frontend (React) using HLS/RTMP/WebRTC. I opted for HLS because it seems to have the least amount of dependencies and this may end up running on a Pi, so simplicity is good.

  



  const { spawn } = require('child_process');
var args = [
    '-pix_fmt', 'uyvy422',
    '-f', 'avfoundation',
    '-framerate', '30',
    '-i', '0',
    '-c:v', 'libx264',
    '-crf', '21',
    '-preset', 'veryfast',
    '-f', 'hls',
    '-hls_time', '4',
    '-hls_playlist_type', 'event', 'stream.m3u8'
]
const ffmpeg = spawn('ffmpeg', args);

ffmpeg.stdout.on('data', (data) => {
  console.log(`stdout: ${data}`);
});

ffmpeg.stderr.on('data', (data) => {
    console.error(`stderr: ${data}`);
});

ffmpeg.on('close', (code, signal) => {
  if(code) console.log(`child process exited with code ${code}`);
  else if(signal) console.log(`child process exited with signal ${signal}`);
});


  



  My expectation is that this should grab the 0th video input and encode to hls. Unfortunately, I get this as a result.

  



  stderr: ffmpeg version 4.2.3
stderr:  Copyright (c) 2000-2020 the FFmpeg developers
  built with Apple clang version 11.0.3 (clang-1103.0.32.59)
  configuration: --prefix=/usr/local/Cellar/ffmpeg/4.2.3 --enable-shared --enable-pthreads --enable-version3 --enable-avresample --cc=clang --host-cflags=-fno-stack-check --host-ldflags= --enable-ffplay --enable-gnutls --enable-gpl --enable-libaom --enable-libbluray --enable-libdav1d --enable-libmp3lame --enable-libopus --enable-librubberband --enable-libsnappy --enable-libsrt --enable-libtesseract --enable-libtheora --enable-libvidstab --enable-libvorbis --enable-libvpx --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxvid --enable-lzma --enable-libfontconfig --enable-libfreetype --enable-frei0r --enable-libass --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-librtmp --enable-libspeex --enable-libsoxr --enable-videotoolbox --disable-libjack --disable-indev=jack
  libavutil      56. 31.100 / 56. 31.100
  libavcodec     58. 54.100 / 58. 54.100
  libavformat    58. 29.100 / 58. 29.100
  libavdevice    58.  8.100 / 58.  8.100
  libavfilter     7. 57.100 /  7. 57.100
  libavresample   4.  0.  0 /  4.  0.  0
  libswscale      5.  5.100 /  5.  5.100
  libswresample   3.  5.100 /  3.  5.100
  libpostproc    55.  5.100 / 55.  5.100

stderr: [AVFoundation input device @ 0x7fcac2604600] Configuration of video device failed, falling back to default.

child process exited with signal SIGABRT


  



  I have no clue why I'm getting a SIGABRT signal but when I manually type in the device (-i "FaceTime HD Camera"), I don't get the config error but the process exits without doing its usual frame=   38 fps=0.0 q=27.0 size=N/A time=00:00:00.46 bitrate=N/A speed=0.869x, it just exits with a SIGABRT.

  



  If I type the exact command (ffmpeg -f avfoundation -framerate 30 -i "0" -c:v libx264 -crf 21 -preset veryfast -f hls -hls_time 4 -hls_playlist_type event out/test.m3u8), everything works as expected and I get an output.

  



  I read here that it could be due to a static build but I'm not really sure why that would cause an issue. For reference, this is on MacOS and will most likely eventually move to Ubuntu.

  



  And idea why this is happening ? Thanks.