Recherche avancée

Médias (1)

Mot : - Tags -/école

Autres articles (31)

  • La sauvegarde automatique de canaux SPIP

    1er avril 2010, par

    Dans le cadre de la mise en place d’une plateforme ouverte, il est important pour les hébergeurs de pouvoir disposer de sauvegardes assez régulières pour parer à tout problème éventuel.
    Pour réaliser cette tâche on se base sur deux plugins SPIP : Saveauto qui permet une sauvegarde régulière de la base de donnée sous la forme d’un dump mysql (utilisable dans phpmyadmin) mes_fichiers_2 qui permet de réaliser une archive au format zip des données importantes du site (les documents, les éléments (...)

  • Script d’installation automatique de MediaSPIP

    25 avril 2011, par

    Afin de palier aux difficultés d’installation dues principalement aux dépendances logicielles coté serveur, un script d’installation "tout en un" en bash a été créé afin de faciliter cette étape sur un serveur doté d’une distribution Linux compatible.
    Vous devez bénéficier d’un accès SSH à votre serveur et d’un compte "root" afin de l’utiliser, ce qui permettra d’installer les dépendances. Contactez votre hébergeur si vous ne disposez pas de cela.
    La documentation de l’utilisation du script d’installation (...)

  • Automated installation script of MediaSPIP

    25 avril 2011, par

    To overcome the difficulties mainly due to the installation of server side software dependencies, an "all-in-one" installation script written in bash was created to facilitate this step on a server with a compatible Linux distribution.
    You must have access to your server via SSH and a root account to use it, which will install the dependencies. Contact your provider if you do not have that.
    The documentation of the use of this installation script is available here.
    The code of this (...)

Sur d’autres sites (5060)

  • phplondon conference 2008

    9 juin 2010, par Mikko Koppanen — Everything else, Imagick, PHP stuff, phplondon08

    To summarize it : I had fun :) My conference preparations started about two weeks before the conference. The PHPLondon fellows (Paul, Matt and Richard) asked me to do a small presentation about Imagick at the pre-conference social event. The presentation I assembled ended up being a little over two hours, give or take. The hardest part was to trim down from two hours to about 40 minutes (I didn’t want to bore the people with too many code examples). The slides are available at http://valokuva.org/talks if you need them for some reason.

    My conference day was pretty hectic from the beginning to the end. I gave a few demos about the products that we represent and the moment I opened my mouth for the first time people started leaving the room. I hope that it had something to do with the “My Framework is better than yours ?” talk starting at the same time ;)

    I met quite a lot of new people at the conference and of course it was nice to see the familiar faces from other conferences and PHPLondon meetings. I was especially happy that I was able to answer the questions Nigel James had ;)

    A huge thanks to the organizers for making this day possible !

  • FFmpeg matlab error : At least one output file must be specified ? [closed]

    3 mars, par as moh

    I'm trying to get I frames from a video using Matlab using this command system(sprintf('ffmpeg -i testVid.mp4 -vf "select=eq(pict_type\,I)" -vsync vfr output_%03d.png')); ,but i get this message

    


     ffmpeg version 7.1-full_build-www.gyan.dev Copyright (c) 2000-2024 the FFmpeg developers 
  built with gcc 14.2.0 (Rev1, Built by MSYS2 project) 
  configuration: --enable-gpl --enable-version3 --enable-static --disable-w32threads --disable-autodetect --enable-fontconfig --enable-iconv --enable-gnutls --enable-libxml2 --enable-gmp --enable-bzlib --enable-lzma --enable-libsnappy --enable-zlib --enable-librist --enable-libsrt --enable-libssh --enable-libzmq --enable-avisynth --enable-libbluray --enable-libcaca --enable-sdl2 --enable-libaribb24 --enable-libaribcaption --enable-libdav1d --enable-libdavs2 --enable-libopenjpeg --enable-libquirc --enable-libuavs3d --enable-libxevd --enable-libzvbi --enable-libqrencode --enable-librav1e --enable-libsvtav1 --enable-libvvenc --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxavs2 --enable-libxeve --enable-libxvid --enable-libaom --enable-libjxl --enable-libvpx --enable-mediafoundation --enable-libass --enable-frei0r --enable-libfreetype --enable-libfribidi --enable-libharfbuzz --enable-liblensfun --enable-libvidstab --enable-libvmaf --enable-libzimg --enable-amf --enable-cuda-llvm --enable-cuvid --enable-dxva2 --enable-d3d11va --enable-d3d12va --enable-ffnvcodec --enable-libvpl --enable-nvdec --enable-nvenc --enable-vaapi --enable-libshaderc --enable-vulkan --enable-libplacebo --enable-opencl --enable-libcdio --enable-libgme --enable-libmodplug --enable-libopenmpt --enable-libopencore-amrwb --enable-libmp3lame --enable-libshine --enable-libtheora --enable-libtwolame --enable-libvo-amrwbenc --enable-libcodec2 --enable-libilbc --enable-libgsm --enable-liblc3 --enable-libopencore-amrnb --enable-libopus --enable-libspeex --enable-libvorbis --enable-ladspa --enable-libbs2b --enable-libflite --enable-libmysofa --enable-librubberband --enable-libsoxr --enable-chromaprint 
  libavutil      59. 39.100 / 59. 39.100 
  libavcodec     61. 19.100 / 61. 19.100 
  libavformat    61.  7.100 / 61.  7.100 
  libavdevice    61.  3.100 / 61.  3.100 
  libavfilter    10.  4.100 / 10.  4.100 
  libswscale      8.  3.100 /  8.  3.100 
  libswresample   5.  3.100 /  5.  3.100 
  libpostproc    58.  3.100 / 58.  3.100 
Trailing option(s) found in the command: may be ignored. 
Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'testVid.mp4': 
  Metadata: 
    major_brand     : isom 
    minor_version   : 512 
    compatible_brands: isomiso2avc1mp41 
    encoder         : Lavf57.83.100 
  Duration: 00:00:02.02, start: 0.000000, bitrate: 12798 kb/s 
  Stream #0:0[0x1](eng): Video: h264 (Baseline) (avc1 / 0x31637661), yuvj420p(pc, progressive), 1280x720 [SAR 1:1 DAR 16:9], 12662 kb/s, 29.74 fps, 30 tbr, 90k tbn (default) 
      Metadata: 
        handler_name    : VideoHandler 
        vendor_id       : [0][0][0][0] 
  Stream #0:1[0x2](eng): Audio: aac (LC) (mp4a / 0x6134706D), 48000 Hz, mono, fltp, 121 kb/s (default) 
      Metadata: 
        handler_name    : SoundHandler 
        vendor_id       : [0][0][0][0] 
At least one output file must be specified 


    


    i searched and tried many cases but i don't know where is the problem, any help please ?

    


  • ffmpeg Non monotonous DTS, Previous DTS is always the same, audio microphone streaming [closed]

    5 février, par adrien gonzalez

    I'm using ffmpeg to stream audio from a microphone using rtp. I'm on Raspberry and use an external sound card (HifiBerry DAC + ADC Pro).
My goal is to stream audio with the lowest latency possible to others Raspberry reading this audio with ffplay. I try not to compress the audio flux and leave it untouched as wav 48000 Hz.
I encounter often some Non Monotonous DTS errors. When this happens I have a latency of hundred of milliseconds adding itself.
I tried to add the +igndts flag but it is not changing anything. Also tried +genpts flag.

    


    What is weird is that the previous DTS is always the same (201165 is the example below) and does not seems to change.
I looked on forums for answers but I'm unable to find one.

    


    Here is my bash command :

    


    ffmpeg -guess_layout_max 0 -re -f alsa -i hw -acodec pcm_s16le -ac 1 -payload_type 10 -f rtp rtp://192.168.1.152:5003

    


    And the result from the terminal :

    


    ffmpeg version 5.1.6-0+deb12u1+rpt1 Copyright (c) 2000-2024 the FFmpeg developers


built with gcc 12 (Debian 12.2.0-14)
  configuration: --prefix=/usr --extra-version=0+deb12u1+rpt1 --toolchain=hardened --incdir=/usr/include/aarch64-linux-gnu --enable-gpl --disable-stripping --disable-mmal --enable-gnutls --enable-ladspa --enable-libaom --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libcodec2 --enable-libdav1d --enable-libflite --enable-libfontconfig --enable-libfreetype --enable-libfribidi --enable-libglslang --enable-libgme --enable-libgsm --enable-libjack --enable-libmp3lame --enable-libmysofa --enable-libopenjpeg --enable-libopenmpt --enable-libopus --enable-libpulse --enable-librabbitmq --enable-librist --enable-librubberband --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libsrt --enable-libssh --enable-libsvtav1 --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvorbis --enable-libvpx --enable-libwebp --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzimg --enable-libzmq --enable-libzvbi --enable-lv2 --enable-omx --enable-openal --enable-opencl --enable-opengl --enable-sand --enable-sdl2 --disable-sndio --enable-libjxl --enable-neon --enable-v4l2-request --enable-libudev --enable-epoxy --libdir=/usr/lib/aarch64-linux-gnu --arch=arm64 --enable-pocketsphinx --enable-librsvg --enable-libdc1394 --enable-libdrm --enable-vout-drm --enable-libiec61883 --enable-chromaprint --enable-frei0r --enable-libx264 --enable-libplacebo --enable-librav1e --enable-shared
  libavutil      57. 28.100 / 57. 28.100
  libavcodec     59. 37.100 / 59. 37.100
  libavformat    59. 27.100 / 59. 27.100
  libavdevice    59.  7.100 / 59.  7.100
  libavfilter     8. 44.100 /  8. 44.100
  libswscale      6.  7.100 /  6.  7.100
  libswresample   4.  7.100 /  4.  7.100
  libpostproc    56.  6.100 / 56.  6.100
Input #0, alsa, from 'hw':
  Duration: N/A, start: 1738663653.066577, bitrate: 1536 kb/s
  Stream #0:0: Audio: pcm_s16le, 48000 Hz, 2 channels, s16, 1536 kb/s
Stream mapping:
  Stream #0:0 -> #0:0 (pcm_s16le (native) -> pcm_s16le (native))
Press [q] to stop, [?] for help
Output #0, rtp, to 'rtp://192.168.1.152:5003':
  Metadata:
    encoder         : Lavf59.27.100
  Stream #0:0: Audio: pcm_s16le, 48000 Hz, mono, s16, 768 kb/s
    Metadata:
      encoder         : Lavc59.37.100 pcm_s16le
SDP:
v=0
o=- 0 0 IN IP4 127.0.0.1
s=No Name
c=IN IP4 192.168.1.152
t=0 0
a=tool:libavformat LIBAVFORMAT_VERSION
m=audio 5003 RTP/AVP 10
b=AS:768

[rtp @ 0x558b48ea90] Non-monotonous DTS in output stream 0:0; previous: 201165, current: 201160; changing to 201165. This may result in incorrect timestamps in the output file.
[rtp @ 0x558b48ea90] Non-monotonous DTS in output stream 0:0; previous: 201165, current: 201155; changing to 201165. This may result in incorrect timestamps in the output file.
[rtp @ 0x558b48ea90] Non-monotonous DTS in output stream 0:0; previous: 201165, current: 201149; changing to 201165. This may result in incorrect timestamps in the output file.
[rtp @ 0x558b48ea90] Non-monotonous DTS in output stream 0:0; previous: 201165, current: 201142; changing to 201165. This may result in incorrect timestamps in the output file.
[rtp @ 0x558b48ea90] Non-monotonous DTS in output stream 0:0; previous: 201165, current: 201134; changing to 201165. This may result in incorrect timestamps in the output file.
[rtp @ 0x558b48ea90] Non-monotonous DTS in output stream 0:0; previous: 201165, current: 201124; changing to 201165. This may result in incorrect timestamps in the output file.
[rtp @ 0x558b48ea90] Non-monotonous DTS in output stream 0:0; previous: 201165, current: 201114; changing to 201165. This may result in incorrect timestamps in the output file.
[rtp @ 0x558b48ea90] Non-monotonous DTS in output stream 0:0; previous: 201165, current: 201102; changing to 201165. This may result in incorrect timestamps in the output file.
[rtp @ 0x558b48ea90] Non-monotonous DTS in output stream 0:0; previous: 201165, current: 201089; changing to 201165. This may result in incorrect timestamps in the output file.
[rtp @ 0x558b48ea90] Non-monotonous DTS in output stream 0:0; previous: 201165, current: 201075; changing to 201165. This may result in incorrect timestamps in the output file.
[rtp @ 0x558b48ea90] Non-monotonous DTS in output stream 0:0; previous: 201165, current: 201060; changing to 201165. This may result in incorrect timestamps in the output file.
[rtp @ 0x558b48ea90] Non-monotonous DTS in output stream 0:0; previous: 201165, current: 201044; changing to 201165. This may result in incorrect timestamps in the output file.
[rtp @ 0x558b48ea90] Non-monotonous DTS in output stream 0:0; previous: 201165, current: 201027; changing to 201165. This may result in incorrect timestamps in the output file.
[rtp @ 0x558b48ea90] Non-monotonous DTS in output stream 0:0; previous: 201165, current: 201009; changing to 201165. This may result in incorrect timestamps in the output file.
[rtp @ 0x558b48ea90] Non-monotonous DTS in output stream 0:0; previous: 201165, current: 200990; changing to 201165. This may result in incorrect timestamps in the output file.
[rtp @ 0x558b48ea90] Non-monotonous DTS in output stream 0:0; previous: 201165, current: 200970; changing to 201165. This may result in incorrect timestamps in the output file.
[rtp @ 0x558b48ea90] Non-monotonous DTS in output stream 0:0; previous: 201165, current: 200949; changing to 201165. This may result in incorrect timestamps in the output file.


    


    I tried to add the +igndts flag but it is not changing anything. Also tried +genpts flag. I expected the DTS to restore itself but I still have the same issue

    


Navigation