Recherche avancée

Sur d’autres sites (11638)

• Streaming without Content-Length in response

  29 août 2011, par kain

  I'm using Node.js, Express (and connect), and fluent-ffmpeg.

  We want to stream audio files that are stored on Amazon S3 through http.

  We have all working, except that we would like to add a feature, the on-the-fly conversion of the stream through ffmpeg.

  This is working well, the problem is that some browsers checks in advance before actually getting the file.

  Incoming requests containing the Range header, for which we reply with a 206 with all the info from S3, have a fundamental problem : we need to know in advance the content-length of the file.

  We don't know that since it is going through ffmpeg.

  One solution might be to write out the resulting content-length directly on S3 when storing the file (in a special header), but this means we have to go through the pain of having queues to encode after upload just to know the size for future requests.
  It also means that if we change compressor or preset we have to go through all this over again, so it is not a viable solution.

  We also noticed big differencies in the way Chrome and Safari request the audio tag src, but this may be discussion for another topic.

  Fact is that without a proper content-length header in response everything seems to break or browsers goes in an infinite loop or restart the stream at pleasure.

  Ideas ?

• ffmpeg says : "option framerate not found"

  16 juillet 2013, par Jason

  Good afternoon.

  I've been trying to use ffmpeg to split a .mpeg into a sequence of .jpeg images. Please note that this is the inverse problem of the one specified here, but the problem I'm facing is not the same as the problem the author of that thread is facing.

  Specifically, I have tried all the following mpeg codecs available in my ffmpeg installation :

  DEV D  ffv1            FFmpeg video codec #1
  
  DEVSD  ffvhuff         Huffyuv FFmpeg variant
  
  DEVSDT mpeg1video      MPEG-1 video
  
  D V DT mpeg1video_vdpau MPEG-1 video (VDPAU acceleration)
  
  D V D  mpeg2_crystalhd MPEG-2 Video (CrystalHD acceleration)
  
  DEVSDT mpeg2video      MPEG-2 video
  
  DEVSDT mpeg4           MPEG-4 part 2
  
  D V D  mpeg4_crystalhd MPEG-4 Part 2 (CrystalHD acceleration)
  
  D V DT mpeg4_vdpau     MPEG-4 part 2 (VDPAU)
  
  D VSDT mpegvideo       MPEG-1 video
  
  D V DT mpegvideo_vdpau MPEG-1/2 video (VDPAU acceleration)
  
  D VSDT mpegvideo_xvmc  MPEG-1/2 video XvMC (X-Video Motion Compensation)
  
  DEVSD  msmpeg4         MPEG-4 part 2 Microsoft variant version 3
  
  D V D  msmpeg4_crystalhd MPEG-4 Part 2 Microsoft variant version 3 (CrystalHD acceleration)
  
  D VSD  msmpeg4v1       MPEG-4 part 2 Microsoft variant version 1
  
  DEVSD  msmpeg4v2       MPEG-4 part 2 Microsoft variant version 2

  I've tried supplying ffmpeg with all different codecs to try to split an input .mpeg video file with 2548 frames into 2548 .jpegs, by using the -vcodec option :

  ffmpeg -r 2548 -i frames.mpeg frames_%06d.jpg -vcodec $codec

  where $codec is any codec among the ones listed above, e.g. ffv1, mpeg4, etc. However, all my efforts result in the following error :

  [NULL @ 0x1948f20] Value 4707126720094797824.000000 for parameter 'probesize' out of range
  
  [NULL @ 0x1948f20] Value 4707126720094797824.000000 for parameter 'analyzeduration' out of range
  
  [NULL @ 0x1948f20] Value 4697254411347427328.000000 for parameter 'indexmem' out of range
  
  [NULL @ 0x1948f20] Value 4703785510416416768.000000 for parameter 'rtbufsize' out of range
  
  [NULL @ 0x1948f20] Value -4616189618054758400.000000 for parameter 'fpsprobesize' out of range
  
  [NULL @ 0x1948f20] Value 4607182418800017408.000000 for parameter 'f_err_detect' out of     range
  
  [NULL @ 0x1948f20] Value 4607182418800017408.000000 for parameter 'err_detect' out of range
  
  Option framerate not found.  

  Which is weird, because I've actually specified the frame rate parameter through the -r switch. I googled a bit and it appears that this error was mentioned approximately a year and a half ago on the ffmpeg bug tracker but that information makes little sense to me because it's relevant to the devs. Curiously, if I interchange the position of the parameters and put -r after -i or even after -vcodec, the error message changes to :

  [NULL @ 0x24abf20] Value 4707126720094797824.000000 for parameter 'probesize' out of range
  
  [NULL @ 0x24abf20] Value 4707126720094797824.000000 for parameter 'analyzeduration' out of range
  
  [NULL @ 0x24abf20] Value 4697254411347427328.000000 for parameter 'indexmem' out of range
  
  [NULL @ 0x24abf20] Value 4703785510416416768.000000 for parameter 'rtbufsize' out of range
  
  [NULL @ 0x24abf20] Value -4616189618054758400.000000 for parameter 'fpsprobesize' out of  range
  
  [NULL @ 0x24abf20] Value 4607182418800017408.000000 for parameter 'f_err_detect' out of  range
  
  [NULL @ 0x24abf20] Value 4607182418800017408.000000 for parameter 'err_detect' out of range
  
  [NULL @ 0x24b23c0] Value 4686111960511545344.000000 for parameter 'b' out of range
  
  [NULL @ 0x24b23c0] Value 4683532506232782848.000000 for parameter 'ab' out of range
  
  [NULL @ 0x24b23c0] Value 4705844345939427328.000000 for parameter 'bt' out of range
  
  [NULL @ 0x24b23c0] Value 4617315517961601024.000000 for parameter 'me_method' out of range
  
  [NULL @ 0x24b23c0] Value 4622945017495814144.000000 for parameter 'g' out of range
  
  [NULL @ 0x24b23c0] Value 4611686018427387904.000000 for parameter 'qmin' out of range
  
  [NULL @ 0x24b23c0] Value 4629418941960159232.000000 for parameter 'qmax' out of range
  
  [NULL @ 0x24b23c0] Value 4613937818241073152.000000 for parameter 'qdiff' out of range
  
  [NULL @ 0x24b23c0] Value -4616189618054758400.000000 for parameter 'wpredp' out of range
  
  [NULL @ 0x24b23c0] Value 4607182418800017408.000000 for parameter 'bug' out of range
  
  [NULL @ 0x24b23c0] Value 4607182418800017408.000000 for parameter 'er' out of range
  
  [NULL @ 0x24b23c0] Value 4607182418800017408.000000 for parameter 'err_detect' out of range
  
  [NULL @ 0x24b23c0] Value 4613937818241073152.000000 for parameter 'ec' out of range
  
  [NULL @ 0x24b23c0] Value 4620693217682128896.000000 for parameter 'ildctcmp' out of range
  
  [NULL @ 0x24b23c0] Value 4620693217682128896.000000 for parameter 'subq' out of range
  
  [NULL @ 0x24b23c0] Value 4696837138094751744.000000 for parameter 'ibias' out of range
  
  [NULL @ 0x24b23c0] Value 4696837138094751744.000000 for parameter 'pbias' out of range
  
  [NULL @ 0x24b23c0] Value 4642507528377204736.000000 for parameter 'lmin' out of range
  
  [NULL @ 0x24b23c0] Value 4660262442142531584.000000 for parameter 'lmax' out of range
  
  [NULL @ 0x24b23c0] Value 4696130710463840256.000000 for parameter 'flags2' out of range
  
  [NULL @ 0x24b23c0] Value 4607182418800017408.000000 for parameter 'threads' out of range
  
  [NULL @ 0x24b23c0] Value 4620693217682128896.000000 for parameter 'nssew' out of range
  
  [NULL @ 0x24b23c0] Value -4586705114244317184.000000 for parameter 'profile' out of range
  
  [NULL @ 0x24b23c0] Value -4586705114244317184.000000 for parameter 'level' out of range
  
  [NULL @ 0x24b23c0] Value 4623507967449235456.000000 for parameter 'skipcmp' out of range
  
  [NULL @ 0x24b23c0] Value 4642507528377204736.000000 for parameter 'mblmin' out of range
  
  [NULL @ 0x24b23c0] Value 4660262442142531584.000000 for parameter 'mblmax' out of range
  
  [NULL @ 0x24b23c0] Value 4643211215818981376.000000 for parameter 'mepc' out of range
  
  [NULL @ 0x24b23c0] Value 4607182418800017408.000000 for parameter 'bidir_refine' out of range
  
  [NULL @ 0x24b23c0] Value -4616189618054758400.000000 for parameter 'cqp' out of range
  
  [NULL @ 0x24b23c0] Value 4627730092099895296.000000 for parameter 'keyint_min' out of range
  
  [NULL @ 0x24b23c0] Value 4607182418800017408.000000 for parameter 'refs' out of range
  
  [NULL @ 0x24b23c0] Value -4616189618054758400.000000 for parameter 'directpred' out of range
  
  [NULL @ 0x24b23c0] Value 4618441417868443648.000000 for parameter 'sc_factor' out of range
  
  [NULL @ 0x24b23c0] Value 4643211215818981376.000000 for parameter 'mv0_threshold' out of range
  
  [NULL @ 0x24b23c0] Value 4630826316843712512.000000 for parameter 'b_sensitivity' out of range
  
  [NULL @ 0x24b23c0] Value -4616189618054758400.000000 for parameter 'compression_level' out of range
  
  [NULL @ 0x24b23c0] Value -4616189618054758400.000000 for parameter 'min_prediction_order' out of range
  
  [NULL @ 0x24b23c0] Value -4616189618054758400.000000 for parameter 'max_prediction_order' out of range
  
  [NULL @ 0x24b23c0] Value -4616189618054758400.000000 for parameter 'prediction_order_method' out of range
  
  [NULL @ 0x24b23c0] Value -4616189618054758400.000000 for parameter 'min_partition_order' out of range
  
  [NULL @ 0x24b23c0] Value -4616189618054758400.000000 for parameter 'max_partition_order' out of range
  
  [NULL @ 0x24b23c0] Value 4607182418800017408.000000 for parameter 'ticks_per_frame' out of range
  
  [NULL @ 0x24b23c0] Value 4611686018427387904.000000 for parameter 'color_primaries' out of range
  
  [NULL @ 0x24b23c0] Value 4611686018427387904.000000 for parameter 'color_trc' out of range
  
  [NULL @ 0x24b23c0] Value 4611686018427387904.000000 for parameter 'colorspace' out of range
  
  [NULL @ 0x24b23c0] Value -4616189618054758400.000000 for parameter 'aq_mode' out of range
  
  [NULL @ 0x24b23c0] Value -4616189618054758400.000000 for parameter 'rc_lookahead' out of range
  
  [NULL @ 0x24b23c0] Value -4616189618054758400.000000 for parameter 'lpc_type' out of range
  
  [NULL @ 0x24b23c0] Value -4616189618054758400.000000 for parameter 'lpc_passes' out of range
  
  [NULL @ 0x24b23c0] Value 4613937818241073152.000000 for parameter 'thread_type' out of range
  
  [NULL @ 0x24b23c0] Value -4616189618054758400.000000 for parameter 'request_sample_fmt' out of range
  
  frames.mpeg: could not find codec parameters

  I'm at a loss as to what to do with this problem, and am looking for some assistance.

  Kind regards,

  Jason

• How can I write SAPI audio stream to stdout in VBScript ?

  10 mai 2015, par Ravenstine

  I have this VBScript that will take some text from the command line and dictate it to a wav file using MS SAPI.

  Const SAFT48kHz16BitStereo = 39
  
  Const SSFMCreateForWrite = 3
  
  
  
  Set oFileStream = CreateObject("SAPI.SpFileStream")
  
  oFileStream.Format.Type = SAFT48kHz16BitStereo
  
  oFileStream.Open "C:\sample.wav", SSFMCreateForWrite
  
  
  
  Set Sapi = CreateObject("SAPI.SpVoice") 
  
  Set Sapi.voice = Sapi.GetVoices("Name=Microsoft Sam", "Language=409").Item(0)
  
  Sapi.volume = 100
  
  Sapi.rate = 3
  
  Set Sapi.AudioOutputStream = oFileStream
  
  Set args = Wscript.Arguments
  
  Sapi.Speak(args.item(0))

  Is it possible to, instead of write the audio to a file, write it to standard output ? I’d like to be able to pipe the audio directly to FFMpeg without writing to the file system.