Recherche avancée

Médias (1)

Mot : - Tags -/sintel

Autres articles (96)

  • Les sons

    15 mai 2013, par
  • Automated installation script of MediaSPIP

    25 avril 2011, par

    To overcome the difficulties mainly due to the installation of server side software dependencies, an "all-in-one" installation script written in bash was created to facilitate this step on a server with a compatible Linux distribution.
    You must have access to your server via SSH and a root account to use it, which will install the dependencies. Contact your provider if you do not have that.
    The documentation of the use of this installation script is available here.
    The code of this (...)

  • MediaSPIP en mode privé (Intranet)

    17 septembre 2013, par

    À partir de la version 0.3, un canal de MediaSPIP peut devenir privé, bloqué à toute personne non identifiée grâce au plugin "Intranet/extranet".
    Le plugin Intranet/extranet, lorsqu’il est activé, permet de bloquer l’accès au canal à tout visiteur non identifié, l’empêchant d’accéder au contenu en le redirigeant systématiquement vers le formulaire d’identification.
    Ce système peut être particulièrement utile pour certaines utilisations comme : Atelier de travail avec des enfants dont le contenu ne doit pas (...)

Sur d’autres sites (11682)

  • I have an application in flask where it streams a camera using ffmpeg, the problem is that I can not display the video from the camera using the GPU [closed]

    17 janvier, par Ruben

    I'll put you in context, I am using flask (python) to display a camera in the browser to stream it, for this I use the following Python code :

    


    command = [
     'ffmpeg',
     '-loglevel', 'warning',
     '-rtsp_transport', 'tcp',
     '-i', self.config['url'],
     '-map', '0:v:0', # fuerzo que solo procese el video
     '-vf', f'fps={self.config["fps"]},scale=640:360:force_original_aspect_ratio=decrease',
     '-c:v', 'h264_nvenc', # especificamos que queremos tirar de la gpu de nvidia
     '-preset', 'p7', # ajusta para la maxima calidad/velocidad (p1 mas rapida pero peor calidad - p7 más lento pero mejor calidad)
     '-qp', self.config['quality'], # control de calidad del codificador (0 [mejor calidad] - 51 [peor calidad])
     '-pix_fmt', 'yuv444p', # se mete explicitamente el formato de pixeles
     '-color_range', 'pc',
     '-an', # desactiva el audio
     '-f', 'image2pipe',
     'pipe:1'
] 

self.process = subprocess.Popen(
   command,
   stdout=subprocess.PIPE,
   stderr=subprocess.PIPE,
   bufsize=10**8
)


    


    The problem is that it does not display the video streaming, but it connects correctly to the camera.

    


    On the other hand, It show me the following warnings, which may have something to do with the display, it's probably the second warning that has to do with the pixel format :

    


    DEBUG :main:FFmpeg [camera1] : Guessed Channel Layout for Input Stream #0.1 : mono
DEBUG :main:FFmpeg [camera1] : [swscaler @ 0x560f70b78680] deprecated pixel format used, make sure you did set range correctly

    


    The server has different encodes installed :

    


    DEV.LS h264 H.264 / AVC / MPEG-4 AVC / MPEG-4 part 10 (decoders : h264 h264_v4l2m2m h264_qsv h264_cuvid ) (encoders : libx264 libx264rgb h264_nvenc h264_omx h264_qsv h264_v4l2m2m h264_vaapi nvenc nvenc_h264 )

    


    Y uso el h264_nvenc, tambien el servidor tiene soporte de aceleración de hardware con :

    


    libavutil 56. 70.100 / 56. 70.100
libavcodec 58.134.100 / 58.134.100
libavformat 58. 76.100 / 58. 76.100
libavdevice 58. 13.100 / 58. 13.100
libavfilter 7.110.100 / 7.110.100
libswscale 5. 9.100 / 5. 9.100
libswresample 3. 9.100 / 3. 9.100
libpostproc 55. 9.100 / 55. 9.100
Hardware acceleration methods :
vdpau
cuda
vaapi
qsv
drm
opencl

    


    Between them h264_nvenc uses cuda

    


    I expand a little on the information it provides me when using h264_nvenc :

    


    Encoder h264_nvenc [NVIDIA NVENC H.264 encoder]:&#xA;    General capabilities: dr1 delay hardware&#xA;    Threading capabilities: none&#xA;    Supported hardware devices: cuda cuda&#xA;    Supported pixel formats: yuv420p nv12 p010le yuv444p p016le yuv444p16le bgr0 rgb0 cuda&#xA;h264_nvenc AVOptions:&#xA;  -preset            <int>        E..V....... Set the encoding preset (from 0 to 18) (default p4)&#xA;     default         0            E..V.......&#xA;     slow            1            E..V....... hq 2 passes&#xA;     medium          2            E..V....... hq 1 pass&#xA;     fast            3            E..V....... hp 1 pass&#xA;     hp              4            E..V.......&#xA;     hq              5            E..V.......&#xA;     bd              6            E..V.......&#xA;     ll              7            E..V....... low latency&#xA;     llhq            8            E..V....... low latency hq&#xA;     llhp            9            E..V....... low latency hp&#xA;     lossless        10           E..V.......&#xA;     losslesshp      11           E..V.......&#xA;     p1              12           E..V....... fastest (lowest quality)&#xA;     p2              13           E..V....... faster (lower quality)&#xA;     p3              14           E..V....... fast (low quality)&#xA;     p4              15           E..V....... medium (default)&#xA;     p5              16           E..V....... slow (good quality)&#xA;     p6              17           E..V....... slower (better quality)&#xA;     p7              18           E..V....... slowest (best quality)&#xA;  -tune              <int>        E..V....... Set the encoding tuning info (from 1 to 4) (default hq)&#xA;     hq              1            E..V....... High quality&#xA;     ll              2            E..V....... Low latency&#xA;     ull             3            E..V....... Ultra low latency&#xA;     lossless        4            E..V....... Lossless&#xA;  -profile           <int>        E..V....... Set the encoding profile (from 0 to 3) (default main)&#xA;     baseline        0            E..V.......&#xA;     main            1            E..V.......&#xA;     high            2            E..V.......&#xA;     high444p        3            E..V.......&#xA;  -level             <int>        E..V....... Set the encoding level restriction (from 0 to 62) (default auto)&#xA;     auto            0            E..V.......&#xA;     1               10           E..V.......&#xA;     1.0             10           E..V.......&#xA;     1b              9            E..V.......&#xA;     1.0b            9            E..V.......&#xA;     1.1             11           E..V.......&#xA;     1.2             12           E..V.......&#xA;     1.3             13           E..V.......&#xA;     2               20           E..V.......&#xA;     2.0             20           E..V.......&#xA;     2.1             21           E..V.......&#xA;     2.2             22           E..V.......&#xA;     3               30           E..V.......&#xA;     3.0             30           E..V.......&#xA;     3.1             31           E..V.......&#xA;     3.2             32           E..V.......&#xA;     4               40           E..V.......&#xA;     4.0             40           E..V.......&#xA;     4.1             41           E..V.......&#xA;     4.2             42           E..V.......&#xA;     5               50           E..V.......&#xA;     5.0             50           E..V.......&#xA;     5.1             51           E..V.......&#xA;     5.2             52           E..V.......&#xA;     6.0             60           E..V.......&#xA;     6.1             61           E..V.......&#xA;     6.2             62           E..V.......&#xA;  -rc                <int>        E..V....... Override the preset rate-control (from -1 to INT_MAX) (default -1)&#xA;     constqp         0            E..V....... Constant QP mode&#xA;     vbr             1            E..V....... Variable bitrate mode&#xA;     cbr             2            E..V....... Constant bitrate mode&#xA;     vbr_minqp       8388612      E..V....... Variable bitrate mode with MinQP (deprecated)&#xA;     ll_2pass_quality 8388616      E..V....... Multi-pass optimized for image quality (deprecated)&#xA;     ll_2pass_size   8388624      E..V....... Multi-pass optimized for constant frame size (deprecated)&#xA;     vbr_2pass       8388640      E..V....... Multi-pass variable bitrate mode (deprecated)&#xA;     cbr_ld_hq       8388616      E..V....... Constant bitrate low delay high quality mode&#xA;     cbr_hq          8388624      E..V....... Constant bitrate high quality mode&#xA;     vbr_hq          8388640      E..V....... Variable bitrate high quality mode&#xA;  -rc-lookahead      <int>        E..V....... Number of frames to look ahead for rate-control (from 0 to INT_MAX) (default 0)&#xA;  -surfaces          <int>        E..V....... Number of concurrent surfaces (from 0 to 64) (default 0)&#xA;  -cbr               <boolean>    E..V....... Use cbr encoding mode (default false)&#xA;  -2pass             <boolean>    E..V....... Use 2pass encoding mode (default auto)&#xA;  -gpu               <int>        E..V....... Selects which NVENC capable GPU to use. First GPU is 0, second is 1, and so on. (from -2 to INT_MAX) (default any)&#xA;     any             -1           E..V....... Pick the first device available&#xA;     list            -2           E..V....... List the available devices&#xA;  -delay             <int>        E..V....... Delay frame output by the given amount of frames (from 0 to INT_MAX) (default INT_MAX)&#xA;  -no-scenecut       <boolean>    E..V....... When lookahead is enabled, set this to 1 to disable adaptive I-frame insertion at scene cuts (default false)&#xA;  -forced-idr        <boolean>    E..V....... If forcing keyframes, force them as IDR frames. (default false)&#xA;  -b_adapt           <boolean>    E..V....... When lookahead is enabled, set this to 0 to disable adaptive B-frame decision (default true)&#xA;  -spatial-aq        <boolean>    E..V....... set to 1 to enable Spatial AQ (default false)&#xA;  -spatial_aq        <boolean>    E..V....... set to 1 to enable Spatial AQ (default false)&#xA;  -temporal-aq       <boolean>    E..V....... set to 1 to enable Temporal AQ (default false)&#xA;  -temporal_aq       <boolean>    E..V....... set to 1 to enable Temporal AQ (default false)&#xA;  -zerolatency       <boolean>    E..V....... Set 1 to indicate zero latency operation (no reordering delay) (default false)&#xA;  -nonref_p          <boolean>    E..V....... Set this to 1 to enable automatic insertion of non-reference P-frames (default false)&#xA;  -strict_gop        <boolean>    E..V....... Set 1 to minimize GOP-to-GOP rate fluctuations (default false)&#xA;  -aq-strength       <int>        E..V....... When Spatial AQ is enabled, this field is used to specify AQ strength. AQ strength scale is from 1 (low) - 15 (aggressive) (from 1 to 15) (default 8)&#xA;  -cq                <float>      E..V....... Set target quality level (0 to 51, 0 means automatic) for constant quality mode in VBR rate control (from 0 to 51) (default 0)&#xA;  -aud               <boolean>    E..V....... Use access unit delimiters (default false)&#xA;  -bluray-compat     <boolean>    E..V....... Bluray compatibility workarounds (default false)&#xA;  -init_qpP          <int>        E..V....... Initial QP value for P frame (from -1 to 51) (default -1)&#xA;  -init_qpB          <int>        E..V....... Initial QP value for B frame (from -1 to 51) (default -1)&#xA;  -init_qpI          <int>        E..V....... Initial QP value for I frame (from -1 to 51) (default -1)&#xA;  -qp                <int>        E..V....... Constant quantization parameter rate control method (from -1 to 51) (default -1)&#xA;  -weighted_pred     <int>        E..V....... Set 1 to enable weighted prediction (from 0 to 1) (default 0)&#xA;  -coder             <int>        E..V....... Coder type (from -1 to 2) (default default)&#xA;     default         -1           E..V.......&#xA;     auto            0            E..V.......&#xA;     cabac           1            E..V.......&#xA;     cavlc           2            E..V.......&#xA;     ac              1            E..V.......&#xA;     vlc             2            E..V.......&#xA;  -b_ref_mode        <int>        E..V....... Use B frames as references (from 0 to 2) (default disabled)&#xA;     disabled        0            E..V....... B frames will not be used for reference&#xA;     each            1            E..V....... Each B frame will be used for reference&#xA;     middle          2            E..V....... Only (number of B frames)/2 will be used for reference&#xA;  -a53cc             <boolean>    E..V....... Use A53 Closed Captions (if available) (default true)&#xA;  -dpb_size          <int>        E..V....... Specifies the DPB size used for encoding (0 means automatic) (from 0 to INT_MAX) (default 0)&#xA;  -multipass         <int>        E..V....... Set the multipass encoding (from 0 to 2) (default disabled)&#xA;     disabled        0            E..V....... Single Pass&#xA;     qres            1            E..V....... Two Pass encoding is enabled where first Pass is quarter resolution&#xA;     fullres         2            E..V....... Two Pass encoding is enabled where first Pass is full resolution&#xA;  -ldkfs             <int>        E..V....... Low delay key frame scale; Specifies the Scene Change frame size increase allowed in case of single frame VBV and CBR (from 0 to 255) (default 0)&#xA;</int></int></int></boolean></int></int></int></int></int></int></int></boolean></boolean></float></int></boolean></boolean></boolean></boolean></boolean></boolean></boolean></boolean></boolean></boolean></int></int></boolean></boolean></int></int></int></int></int></int></int>

    &#xA;

    If anyone has some idea or needs more information to help me, I would appreciate it.

    &#xA;

  • How to disable libav autorotate display matrix

    16 janvier 2018, par Davood Falahati

    I have a video taken from my mobile in portrait mode. Here is the dumped info about the video :

    Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'video.MOV':
    Metadata:
    major_brand     : qt  
    minor_version   : 0
    compatible_brands: qt  
    creation_time   : 2017-05-04 02:21:37
    Duration: 00:00:06.91, start: 0.000023, bitrate: 4700 kb/s
    Stream #0:0(und): Audio: aac (LC) (mp4a / 0x6134706D), 44100 Hz, mono, fltp, 90 kb/s (default)
    Metadata:
     creation_time   : 2017-05-04 02:21:37
     handler_name    : Core Media Data Handler
    Stream #0:1(und): Video: h264 (High) (avc1 / 0x31637661), yuv420p(tv, bt709), 1280x720, 4602 kb/s, 29.98 fps, 29.97 tbr, 600 tbn, 1200 tbc (default)
    Metadata:
     rotate          : 90
     creation_time   : 2017-05-04 02:21:37
     handler_name    : Core Media Data Handler
     encoder         : H.264
    Side data:
     displaymatrix: rotation of -90.00 degrees
     5.78 A-V: -0.028 fd=   1 aq=   14KB vq=  351KB sq=    0B f=0/0  

    I am using libav api to decode/encode my video. After encoding, I get the rotated version of the video by -90 degrees.

    How can I stop decoder to prevent auto-rotation ?

  • How can I remove “original display aspect ratio 16:9” from a mp4 file using ffmpeg ?

    21 juin 2020, par Михаил Бурд

    I wish to remove the Original display aspect ratio entry from the video section.

    &#xA;

    Video&#xA;ID                                       : 2&#xA;Format                                   : DV&#xA;Format settings, wrapping mode           : Frame&#xA;Codec ID                                 : 0D01030102020201-0401020202010200&#xA;Duration                                 : 1 h 34 min&#xA;Bit rate mode                            : Constant&#xA;Bit rate                                 : 24.4 Mb/s&#xA;Width                                    : 720 pixels&#xA;Height                                   : 576 pixels&#xA;Display aspect ratio                     : 4:3&#xA;Original display aspect ratio            : 16:9&#xA;Frame rate mode                          : Constant&#xA;Frame rate                               : 25.000 FPS&#xA;Standard                                 : PAL&#xA;Color space                              : YUV&#xA;Chroma subsampling                       : 4:2:0&#xA;Bit depth                                : 8 bits&#xA;Scan type                                : Interlaced&#xA;Scan order                               : Bottom Field First&#xA;Compression mode                         : Lossy&#xA;Bits/(Pixel*Frame)                       : 2.357&#xA;Time code of first frame                 : 00:00:00:01&#xA;Time code source                         : Subcode time code&#xA;Stream size                              : 16.1 GiB (76%)&#xA;Title                                    : Picture&#xA;Color range                              : Limited&#xA;Transfer characteristics                 : BT.601&#xA;

    &#xA;

    If I want to remove the Original display aspect ratio entry completely, what ffmpeg command can I use to achieve that ?&#xA;Thank you.

    &#xA;