Recherche avancée

Médias (91)

Autres articles (112)

  • Script d’installation automatique de MediaSPIP

    25 avril 2011, par

    Afin de palier aux difficultés d’installation dues principalement aux dépendances logicielles coté serveur, un script d’installation "tout en un" en bash a été créé afin de faciliter cette étape sur un serveur doté d’une distribution Linux compatible.
    Vous devez bénéficier d’un accès SSH à votre serveur et d’un compte "root" afin de l’utiliser, ce qui permettra d’installer les dépendances. Contactez votre hébergeur si vous ne disposez pas de cela.
    La documentation de l’utilisation du script d’installation (...)

  • Demande de création d’un canal

    12 mars 2010, par

    En fonction de la configuration de la plateforme, l’utilisateur peu avoir à sa disposition deux méthodes différentes de demande de création de canal. La première est au moment de son inscription, la seconde, après son inscription en remplissant un formulaire de demande.
    Les deux manières demandent les mêmes choses fonctionnent à peu près de la même manière, le futur utilisateur doit remplir une série de champ de formulaire permettant tout d’abord aux administrateurs d’avoir des informations quant à (...)

  • La sauvegarde automatique de canaux SPIP

    1er avril 2010, par

    Dans le cadre de la mise en place d’une plateforme ouverte, il est important pour les hébergeurs de pouvoir disposer de sauvegardes assez régulières pour parer à tout problème éventuel.
    Pour réaliser cette tâche on se base sur deux plugins SPIP : Saveauto qui permet une sauvegarde régulière de la base de donnée sous la forme d’un dump mysql (utilisable dans phpmyadmin) mes_fichiers_2 qui permet de réaliser une archive au format zip des données importantes du site (les documents, les éléments (...)

Sur d’autres sites (11450)

  • 12 ffmpeg xfade transitions : "option not found"

    17 juillet 2023, par nimda

    I'm running into a strange error where each of these following 12 of the 56 xfade transitions are throwing errors :

    


      

    • hlwind

      • 


    • hrwind

      • 


    • vuwind

      • 


    • vdwind

      • 


    • coverleft

      • 


    • coverright

      • 


    • coverup

      • 


    • coverdown

      • 


    • revealleft

      • 


    • revealright

      • 


    • revealup

      • 


    • revealdown

      • 


    


    I've tested all filter transitions with the following command, which is being generated by a nodeJS app with the fluent-ffmpeg library, and only the twelve listed above fail with the same error "option not found" :

    


    ffmpeg -f lavfi -t 169
  -i color=c=000000:s=960x540:r=30:duration=169
  -i file:///Users/johnbandy/Work/Projects/Active/CNCT/XFade/_assets/crosstrekvx-1.jpg
  -i file:///Users/johnbandy/Work/Projects/Active/CNCT/XFade/_assets/crosstrekvx-2.jpg 
  -filter_complex
    [1:v]format=pix_fmts=yuva420p,scale=w=4608:h=-1,zoompan=z='1.2+(0*(ot/4))':x='(on/(30*4))*(iw-iw/1.2)':y='(ih-ih/zoom)/2':d=120:s=960x540[1_up];
    [1_up]scale=w=960:h=-1[1_down];
    [2:v]format=pix_fmts=yuva420p,scale=w=4608:h=-1,zoompan=z='1.2+(0*(ot/4))':x='(on/(30*4))*(iw-iw/1.2)':y='(ih-ih/zoom)/2':d=120:s=960x540[2_up];
    [2_up]scale=w=960:h=-1[2_down];
    [1_down][2_down]xfade=transition=revealdown:duration=1:offset=3[2_out];
    [0:v][2_out]overlay=x=0:y=0:enable='lte(t,7)'[all_out]
  -vcodec libx264 -r 30 -f mp4 -map [all_out] -preset veryfast -crf 18 -movflags frag_keyframe+empty_moov -pix_fmt yuv420p all.mp4


    


    fflog output :

    


    ffmpeg version 6.0 Copyright (c) 2000-2023 the FFmpeg developers
  built with Apple clang version 14.0.3 (clang-1403.0.22.14.1)
  configuration: --prefix=/opt/homebrew/Cellar/ffmpeg/6.0 --enable-shared --enable-pthreads --enable-version3 --cc=clang --host-cflags= --host-ldflags= --enable-ffplay --enable-gnutls --enable-gpl --enable-libaom --enable-libaribb24 --enable-libbluray --enable-libdav1d --enable-libmp3lame --enable-libopus --enable-librav1e --enable-librist --enable-librubberband --enable-libsnappy --enable-libsrt --enable-libsvtav1 --enable-libtesseract --enable-libtheora --enable-libvidstab --enable-libvmaf --enable-libvorbis --enable-libvpx --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxml2 --enable-libxvid --enable-lzma --enable-libfontconfig --enable-libfreetype --enable-frei0r --enable-libass --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-libspeex --enable-libsoxr --enable-libzmq --enable-libzimg --disable-libjack --disable-indev=jack --enable-videotoolbox --enable-audiotoolbox --enable-neon
  libavutil      58.  2.100 / 58.  2.100
  libavcodec     60.  3.100 / 60.  3.100
  libavformat    60.  3.100 / 60.  3.100
  libavdevice    60.  1.100 / 60.  1.100
  libavfilter     9.  3.100 /  9.  3.100
  libswscale      7.  1.100 /  7.  1.100
  libswresample   4. 10.100 /  4. 10.100
  libpostproc    57.  1.100 / 57.  1.100
Input #0, lavfi, from 'color=c=000000:s=960x540:r=30:duration=169':
  Duration: N/A, start: 0.000000, bitrate: N/A
  Stream #0:0: Video: wrapped_avframe, yuv420p, 960x540 [SAR 1:1 DAR 16:9], 30 fps, 30 tbr, 30 tbn
Input #1, image2, from 'file:///Users/johnbandy/Work/Projects/Active/CNCT/XFade/_assets/crosstrekvx-1.jpg':
  Duration: 00:00:00.04, start: 0.000000, bitrate: 36486 kb/s
  Stream #1:0: Video: mjpeg (Baseline), yuvj444p(pc, bt470bg/unknown/unknown), 960x540, 25 fps, 25 tbr, 25 tbn
Input #2, image2, from 'file:///Users/johnbandy/Work/Projects/Active/CNCT/XFade/_assets/crosstrekvx-2.jpg':
  Duration: 00:00:00.04, start: 0.000000, bitrate: 35680 kb/s
  Stream #2:0: Video: mjpeg (Baseline), yuvj444p(pc, bt470bg/unknown/unknown), 960x540, 25 fps, 25 tbr, 25 tbn
[Parsed_xfade_8 @ 0x60000137cb00] [Eval @ 0x16f9b5348] Undefined constant or missing '(' in 'revealdown'
[Parsed_xfade_8 @ 0x60000137cb00] Unable to parse option value "revealdown"
Error applying option 'transition' to filter 'xfade': Option not found
Error initializing complex filters.
Option not found


    


    The fflog for a successful video generation follows (for comparison to the erroneous log above) :

    


    ffmpeg version 6.0 Copyright (c) 2000-2023 the FFmpeg developers
  built with Apple clang version 14.0.3 (clang-1403.0.22.14.1)
  configuration: --prefix=/opt/homebrew/Cellar/ffmpeg/6.0 --enable-shared --enable-pthreads --enable-version3 --cc=clang --host-cflags= --host-ldflags= --enable-ffplay --enable-gnutls --enable-gpl --enable-libaom --enable-libaribb24 --enable-libbluray --enable-libdav1d --enable-libmp3lame --enable-libopus --enable-librav1e --enable-librist --enable-librubberband --enable-libsnappy --enable-libsrt --enable-libsvtav1 --enable-libtesseract --enable-libtheora --enable-libvidstab --enable-libvmaf --enable-libvorbis --enable-libvpx --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxml2 --enable-libxvid --enable-lzma --enable-libfontconfig --enable-libfreetype --enable-frei0r --enable-libass --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-libspeex --enable-libsoxr --enable-libzmq --enable-libzimg --disable-libjack --disable-indev=jack --enable-videotoolbox --enable-audiotoolbox --enable-neon
  libavutil      58.  2.100 / 58.  2.100
  libavcodec     60.  3.100 / 60.  3.100
  libavformat    60.  3.100 / 60.  3.100
  libavdevice    60.  1.100 / 60.  1.100
  libavfilter     9.  3.100 /  9.  3.100
  libswscale      7.  1.100 /  7.  1.100
  libswresample   4. 10.100 /  4. 10.100
  libpostproc    57.  1.100 / 57.  1.100
Input #0, lavfi, from 'color=c=000000:s=960x540:r=30:duration=169':
  Duration: N/A, start: 0.000000, bitrate: N/A
  Stream #0:0: Video: wrapped_avframe, yuv420p, 960x540 [SAR 1:1 DAR 16:9], 30 fps, 30 tbr, 30 tbn
Input #1, image2, from 'file:///Users/johnbandy/Work/Projects/Active/CNCT/XFade/_assets/crosstrekvx-1.jpg':
  Duration: 00:00:00.04, start: 0.000000, bitrate: 36486 kb/s
  Stream #1:0: Video: mjpeg (Baseline), yuvj444p(pc, bt470bg/unknown/unknown), 960x540, 25 fps, 25 tbr, 25 tbn
Input #2, image2, from 'file:///Users/johnbandy/Work/Projects/Active/CNCT/XFade/_assets/crosstrekvx-2.jpg':
  Duration: 00:00:00.04, start: 0.000000, bitrate: 35680 kb/s
  Stream #2:0: Video: mjpeg (Baseline), yuvj444p(pc, bt470bg/unknown/unknown), 960x540, 25 fps, 25 tbr, 25 tbn
Stream mapping:
  Stream #0:0 (wrapped_avframe) -> overlay
  Stream #1:0 (mjpeg) -> format:default
  Stream #2:0 (mjpeg) -> format:default
  overlay:default -> Stream #0:0 (libx264)
Press [q] to stop, [?] for help
[swscaler @ 0x140158000] deprecated pixel format used, make sure you did set range correctly
[swscaler @ 0x120098000] deprecated pixel format used, make sure you did set range correctly
[swscaler @ 0x130078000] deprecated pixel format used, make sure you did set range correctly
    Last message repeated 2 times
[swscaler @ 0x140598000] deprecated pixel format used, make sure you did set range correctly
[swscaler @ 0x1302d8000] deprecated pixel format used, make sure you did set range correctly
    Last message repeated 1 times
[libx264 @ 0x138e09080] using SAR=1/1
[libx264 @ 0x138e09080] using cpu capabilities: ARMv8 NEON
[libx264 @ 0x138e09080] profile High, level 3.1, 4:2:0, 8-bit
[libx264 @ 0x138e09080] 264 - core 164 r3095 baee400 - H.264/MPEG-4 AVC codec - Copyleft 2003-2022 - http://www.videolan.org/x264.html - options: cabac=1 ref=1 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=2 psy=1 psy_rd=1.00:0.00 mixed_ref=0 me_range=16 chroma_me=1 trellis=0 8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=0 threads=12 lookahead_threads=4 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2 b_adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=1 keyint=250 keyint_min=25 scenecut=40 intra_refresh=0 rc_lookahead=10 rc=crf mbtree=1 crf=18.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00
Output #0, mp4, to 'all.mp4':
  Metadata:
    encoder         : Lavf60.3.100
  Stream #0:0: Video: h264 (avc1 / 0x31637661), yuv420p(progressive), 960x540 [SAR 1:1 DAR 16:9], q=2-31, 30 fps, 15360 tbn
    Metadata:
      encoder         : Lavc60.3.100 libx264
    Side data:
      cpb: bitrate max/min/avg: 0/0/0 buffer size: 0 vbv_delay: N/A
frame=    0 fps=0.0 q=0.0 size=       0kB time=-577014:32:22.77 bitrate=  -0.0kbits/s speed=N/A    
frame=   32 fps=0.0 q=24.0 size=       0kB time=00:00:01.00 bitrate=   0.3kbits/s speed=1.94x    
frame=   87 fps= 84 q=24.0 size=       0kB time=00:00:02.83 bitrate=   0.1kbits/s speed=2.75x    
frame=  164 fps=107 q=24.0 size=       0kB time=00:00:05.40 bitrate=   0.1kbits/s speed=3.52x    
frame=  812 fps=399 q=24.0 size=     512kB time=00:00:26.96 bitrate= 155.5kbits/s speed=13.3x    
frame= 1821 fps=718 q=24.0 size=     512kB time=00:01:00.60 bitrate=  69.2kbits/s speed=23.9x    
frame= 2469 fps=813 q=24.0 size=     512kB time=00:01:22.23 bitrate=  51.0kbits/s speed=27.1x    
frame= 3421 fps=967 q=24.0 size=     512kB time=00:01:53.96 bitrate=  36.8kbits/s speed=32.2x    
frame= 4522 fps=1120 q=24.0 size=     768kB time=00:02:30.63 bitrate=  41.8kbits/s speed=37.3x    
frame= 5070 fps=1184 q=-1.0 Lsize=     812kB time=00:02:48.90 bitrate=  39.4kbits/s speed=39.5x    
video:769kB audio:0kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: 5.626653%
[libx264 @ 0x138e09080] frame I:21    Avg QP: 2.73  size:  3710
[libx264 @ 0x138e09080] frame P:1305  Avg QP: 6.83  size:   449
[libx264 @ 0x138e09080] frame B:3744  Avg QP: 9.07  size:    33
[libx264 @ 0x138e09080] consecutive B-frames:  1.1%  1.4%  0.0% 97.5%
[libx264 @ 0x138e09080] mb I  I16..4: 95.4%  0.7%  3.8%
[libx264 @ 0x138e09080] mb P  I16..4:  0.1%  0.3%  0.1%  P16..4:  2.3%  0.2%  0.1%  0.0%  0.0%    skip:97.0%
[libx264 @ 0x138e09080] mb B  I16..4:  0.0%  0.0%  0.0%  B16..8:  0.1%  0.0%  0.0%  direct: 0.1%  skip:99.8%  L0:70.9% L1:27.3% BI: 1.8%
[libx264 @ 0x138e09080] 8x8 transform intra:13.8% inter:71.9%
[libx264 @ 0x138e09080] coded y,uvDC,uvAC intra: 19.1% 12.6% 5.2% inter: 0.3% 0.5% 0.0%
[libx264 @ 0x138e09080] i16 v,h,dc,p: 94%  2%  4%  1%
[libx264 @ 0x138e09080] i8 v,h,dc,ddl,ddr,vr,hd,vl,hu:  7% 41% 22%  2%  6%  2%  9%  3%  8%
[libx264 @ 0x138e09080] i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 11% 32% 16%  2% 11%  4% 12%  3%  8%
[libx264 @ 0x138e09080] i8c dc,h,v,p: 88%  9%  2%  1%
[libx264 @ 0x138e09080] Weighted P-Frames: Y:1.6% UV:1.6%
[libx264 @ 0x138e09080] kb/s:37.25


    


  • Error : "No such option : -l" when running yt-dlp

    12 juin 2022, par garson

    I have adapted code from this Stack Overflow answer to try to download a video and use ffmpeg to alter it

    


    yt-dlp    "https://www.youtube.com/watch?v=PtkqwslbLY8" -o  ffmpeg -i in.mp4 -vcodec libx264 -crf 23 -preset fast -profile:v baseline \
-level 3 -refs 6 -vf "scale=640:-1,pad=iw:480:0:(oh-ih)/2,format=yuv420p" \
-acodec copy output.mp4


    


    However, when I run this I'm getting the error :

    


    yt-dlp: error: no such option: -l


    


    Any ideas of how to fix this ?

    


  • Why do I get "method DESCRIBE failed : 401 Unauthorized "

    28 juillet 2021, par TheOliveTurtle

    Let me explain my problem, I am trying to access different channels in a DVR system.
I have successfully gotten access to a single camera (channel 1) by using opencv as such :

    


    public_link = 'rtsp://test:test@192.168.1.48/cam/realmonitor'

cap = cv2.VideoCapture(public_link, cv2.CAP_FFMPEG)


    


    The problem is I can't access the other channels with these parameters :

    


    public_link = 'rtsp://test:test@192.168.1.48/cam/realmonitor?channel=3&subtype=0'

cap = cv2.VideoCapture(public_link, cv2.CAP_FFMPEG)


    


    I've tried the following links :

    


      

    • rtsp ://test:test@192.168.1.48/cam/realmonitor ?channel=3&subtype=0

      • 


    • rtsp ://test:test@192.168.1.48/cam/realmonitor ?channel=3&subtype=1

      • 


    • rtsp ://192.168.1.48/cam/realmonitor ?channel=3&subtype=0&authbasic=dGVzdDp0ZXN0

      • 


    


    I get this following error :

    


    


    [rtsp @ 00000201ce582cc0] method DESCRIBE failed : 401 Unauthorized

    


    


    I've noticed that even if I test with this URL (rtsp ://test:test@192.168.1.48/blablabla) it works just fine ! (ONLY Channel #1) but when I insert the symbol '=' into the URL string, I get the above error.

    


    It's really frustrating, Any sort of help would be much appreciated.

    


    PS : the user 'test' has admin privileges in the system.

    


    I've tried to run the test with plain ffmpeg command like such :
ffmpeg -loglevel debug -i "rtsp://test:test@192.168.1.48/cam/monitor?channel=3&subtype=0" ./folder/output.m3u8

    


    I get the following error :

    


    PS C:\Users\cjhou> ffmpeg -loglevel debug -i "rtsp://test:test@192.168.1.48/cam/realmonitor?channel=3&subtype=0" .\folder\output.m3u8 
ffmpeg version 4.4-full_build-www.gyan.dev Copyright (c) 2000-2021 the FFmpeg developers
built with gcc 10.2.0 (Rev6, Built by MSYS2 project)
configuration: --enable-gpl --enable-version3 --enable-static --disable-w32threads --disable-autodetect --enable-fontconfig --enable-iconv --enable-gnutls --enable-libxml2 --enable-gmp --enable-lzma --enable-libsnappy --enable-zlib --enable-librist --enable-libsrt --enable-libssh --enable-libzmq --enable-avisynth --enable-libbluray --enable-libcaca --enable-sdl2 --enable-libdav1d --enable-libzvbi --enable-librav1e --enable-libsvtav1 --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxvid --enable-libaom --enable-libopenjpeg --enable-libvpx --enable-libass --enable-frei0r --enable-libfreetype --enable-libfribidi --enable-libvidstab --enable-libvmaf --enable-libzimg --enable-amf --enable-cuda-llvm --enable-cuvid --enable-ffnvcodec --enable-nvdec --enable-nvenc --enable-d3d11va --enable-dxva2 --enable-libmfx --enable-libglslang --enable-vulkan --enable-opencl --enable-libcdio --enable-libgme --enable-libmodplug --enable-libopenmpt --enable-libopencore-amrwb --enable-libmp3lame --enable-libshine --enable-libtheora --enable-libtwolame --enable-libvo-amrwbenc --enable-libilbc --enable-libgsm --enable-libopencore-amrnb --enable-libopus --enable-libspeex --enable-libvorbis --enable-ladspa --enable-libbs2b --enable-libflite --enable-libmysofa --enable-librubberband --enable-libsoxr --enable-chromaprint
libavutil      56. 70.100 / 56. 70.100
libavcodec     58.134.100 / 58.134.100
libavformat    58. 76.100 / 58. 76.100
libavdevice    58. 13.100 / 58. 13.100
libavfilter     7.110.100 /  7.110.100
libswscale      5.  9.100 /  5.  9.100
libswresample   3.  9.100 /  3.  9.100
libpostproc    55.  9.100 / 55.  9.100
Splitting the commandline.
Reading option '-loglevel' ... matched as option 'loglevel' (set logging level) with argument 'debug'.
Reading option '-i' ... matched as input url with argument 'rtsp://test:test@192.168.1.48/cam/realmonitor?channel=3&subtype=0'.
Reading option '.\folder\output.m3u8' ... matched as output url. 
Finished splitting the commandline. 
Parsing a group of options: global. 
Applying option loglevel (set logging level) with argument debug. 
Successfully parsed a group of options. 
Parsing a group of options: input url rtsp://test:test@192.168.1.48/cam/realmonitor?channel=3&subtype=0.
Successfully parsed a group of options.
Opening an input file: rtsp://houssem:152400@192.168.1.48/cam/realmonitor?channel=3&subtype=0.
[tcp @ 000001882b592240] No default whitelist set 
[tcp @ 000001882b592240] Original list of addresses: 
[tcp @ 000001882b592240] Address 192.168.1.48 port 554 
[tcp @ 000001882b592240] Interleaved list of addresses: 
[tcp @ 000001882b592240] Address 192.168.1.48 port 554 [tcp @ 000001882b592240] Starting connection attempt to 192.168.1.48 port 554  
[tcp @ 000001882b592240] Successfully connected to 192.168.1.48 port 554 
[rtsp @ 000001882b58f080] method DESCRIBE failed: 401 Unauthorized 
[rtsp @ 000001882b58f080] Cseq: 3  Server: Rtsp Server 960*576*30*4096

WWW-Authenticate: Digest realm="Surveillance Server", nonce="44976150"

rtsp://test:test@192.168.1.48/cam/realmonitor?channel=3&subtype=0: Server returned 401 Unauthorized (authorization failed)


    


    With this command ffplay "rtsp://test:test@192.168.1.48/cam/realmonitor?channel=3&subtype=0", I get this output :

    


    PS C:\Users\cjhou> ffplay "rtsp://test:test@192.168.1.48/cam/realmonitor?channel=3&subtype=0"
ffplay version 4.4-full_build-www.gyan.dev Copyright (c) 2003-2021 the FFmpeg developers
  built with gcc 10.2.0 (Rev6, Built by MSYS2 project)
  configuration: --enable-gpl --enable-version3 --enable-static --disable-w32threads --disable-autodetect --enable-fontconfig --enable-iconv --enable-gnutls --enable-libxml2 --enable-gmp --enable-lzma --enable-libsnappy --enable-zlib --enable-librist --enable-libsrt --enable-libssh --enable-libzmq --enable-avisynth --enable-libbluray --enable-libcaca --enable-sdl2 --enable-libdav1d --enable-libzvbi --enable-librav1e --enable-libsvtav1 --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxvid --enable-libaom --enable-libopenjpeg --enable-libvpx --enable-libass --enable-frei0r --enable-libfreetype --enable-libfribidi --enable-libvidstab --enable-libvmaf --enable-libzimg --enable-amf --enable-cuda-llvm --enable-cuvid --enable-ffnvcodec --enable-nvdec --enable-nvenc --enable-d3d11va --enable-dxva2 --enable-libmfx --enable-libglslang --enable-vulkan --enable-opencl --enable-libcdio --enable-libgme --enable-libmodplug --enable-libopenmpt --enable-libopencore-amrwb --enable-libmp3lame --enable-libshine --enable-libtheora --enable-libtwolame --enable-libvo-amrwbenc --enable-libilbc --enable-libgsm --enable-libopencore-amrnb --enable-libopus --enable-libspeex --enable-libvorbis --enable-ladspa --enable-libbs2b --enable-libflite --enable-libmysofa --enable-librubberband --enable-libsoxr --enable-chromaprint
  libavutil      56. 70.100 / 56. 70.100
  libavcodec     58.134.100 / 58.134.100
  libavformat    58. 76.100 / 58. 76.100
  libavdevice    58. 13.100 / 58. 13.100
  libavfilter     7.110.100 /  7.110.100
  libswscale      5.  9.100 /  5.  9.100
  libswresample   3.  9.100 /  3.  9.100
  libpostproc    55.  9.100 / 55.  9.100
[rtsp @ 000001d413d2f640] method DESCRIBE failed: 401 Unauthorized
rtsp://test:test@192.168.1.48/cam/realmonitor?channel=3&subtype=0: Server returned 401 Unauthorized (authorization failed)
    nan    :  0.000 fd=   0 aq=    0KB vq=    0KB sq=    0B f=0/0


    


    By the way, I am using this device :

    


      

    • Device Name : Digital Video Record

      • 


    • Model Number : 16-CHANNEL

      • 


    • Software Version : XVR_HI3521A_16_v6.1.52.1

      • 


    • Date : Dec 19 2016 14:36:39

      • 


    


    Hope this helps !

    


Navigation