Recherche avancée

Médias (16)

Mot : - Tags -/mp3

Autres articles (78)

  • Dépôt de média et thèmes par FTP

    31 mai 2013, par

    L’outil MédiaSPIP traite aussi les média transférés par la voie FTP. Si vous préférez déposer par cette voie, récupérez les identifiants d’accès vers votre site MédiaSPIP et utilisez votre client FTP favori.
    Vous trouverez dès le départ les dossiers suivants dans votre espace FTP : config/ : dossier de configuration du site IMG/ : dossier des média déjà traités et en ligne sur le site local/ : répertoire cache du site web themes/ : les thèmes ou les feuilles de style personnalisées tmp/ : dossier de travail (...)

  • Qualité du média après traitement

    21 juin 2013, par

    Le bon réglage du logiciel qui traite les média est important pour un équilibre entre les partis ( bande passante de l’hébergeur, qualité du média pour le rédacteur et le visiteur, accessibilité pour le visiteur ). Comment régler la qualité de son média ?
    Plus la qualité du média est importante, plus la bande passante sera utilisée. Le visiteur avec une connexion internet à petit débit devra attendre plus longtemps. Inversement plus, la qualité du média est pauvre et donc le média devient dégradé voire (...)

  • Le plugin : Podcasts.

    14 juillet 2010, par

    Le problème du podcasting est à nouveau un problème révélateur de la normalisation des transports de données sur Internet.
    Deux formats intéressants existent : Celui développé par Apple, très axé sur l’utilisation d’iTunes dont la SPEC est ici ; Le format "Media RSS Module" qui est plus "libre" notamment soutenu par Yahoo et le logiciel Miro ;
    Types de fichiers supportés dans les flux
    Le format d’Apple n’autorise que les formats suivants dans ses flux : .mp3 audio/mpeg .m4a audio/x-m4a .mp4 (...)

Sur d’autres sites (6495)

  • How to extract the first frame from a video ?

    10 août 2024, par Andrew

    I am trying to extract the first frame from a video to save it as a preview.

    


    Here's an almost working solution using ffmpeg :

    


    func extractFirstFrame(videoBytes []byte) ([]byte, error) {
    input := bytes.NewReader(videoBytes)

    var output bytes.Buffer

    err := ffmpeg.Input("pipe:0").
        Filter("select", ffmpeg.Args{"gte(n,1)"}).
        Output(
            "pipe:1",
            ffmpeg.KwArgs{
                "vframes": 1,
                "format":  "image2",
                "vcodec":  "mjpeg",
            }).
        WithInput(input).
        WithOutput(&output).
        Run()

    if err != nil {
        return nil, fmt.Errorf("error extracting frame: %v", err)
    }

    return output.Bytes(), nil
}


    


    The problem with this is that it can only process horizontal videos. For some reason it will throw a 0xbebbb1b7 error for a vertical videos. I don't understand why is that, probably because this is my very first time with ffmpeg.

    


    Also, I am concerned if this solution is optimal. My assumption is that the whole video will be loaded into the memory first, which is kinda bad and I would like to avoid that

    


    I use https://github.com/u2takey/ffmpeg-go, but errors are the same even if I run it using exec :

    


        cmd := exec.Command(
        "ffmpeg",
        "-i", "pipe:0",
        "-vf", "select=eq(n\\,0)",
        "-q:v", "3",
        "-f", "image2",
        "pipe:1",
    )


    


    Interestingly enough, I noticed that running command in the terminal will work as expected with any type of video ffmpeg -i .\video_2024-08-10_00-03-00.mp4 -vf "select=eq(n\,0)"  -q:v 3 output_image.jpg, so the problem may be on how I send those videos to my server. I useFiber and send videos as multipart/form-data and then read it like this :

    


        form_data, err := c.FormFile("image")
    file, err := form_data.Open()
    bytes, err := io.ReadAll(file)
    ....
    preview, err := extractFirstFrame(bytes)



    


    I also managed to find logs for the failed attempt :

    


    
ffmpeg version 7.0.2-full_build-www.gyan.dev Copyright (c) 2000-2024 the FFmpeg developers
  built with gcc 13.2.0 (Rev5, Built by MSYS2 project)
  configuration: --enable-gpl --enable-version3 --enable-static --disable-w32threads --disable-autodetect --enable-fontconfig --enable-iconv --enable-gnutls --enable-libxml2 --enable-gmp --enable-bzlib --enable-lzma --enable-libsnappy --enable-zlib --enable-librist --enable-libsrt --enable-libssh --enable-libzmq --enable-avisynth --enable-libbluray --enable-libcaca --enable-sdl2 --enable-libaribb24 --enable-libaribcaption --enable-libdav1d --enable-libdavs2 --enable-libuavs3d --enable-libxevd --enable-libzvbi --enable-librav1e --enable-libsvtav1 --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxavs2 --enable-libxeve --enable-libxvid --enable-libaom --enable-libjxl --enable-libopenjpeg --enable-libvpx --enable-mediafoundation --enable-libass --enable-frei0r --enable-libfreetype --enable-libfribidi --enable-libharfbuzz --enable-liblensfun --enable-libvidstab --enable-libvmaf --enable-libzimg --enable-amf --enable-cuda-llvm --enable-cuvid --enable-dxva2 --enable-d3d11va --enable-d3d12va --enable-ffnvcodec --enable-libvpl --enable-nvdec --enable-nvenc --enable-vaapi --enable-libshaderc --enable-vulkan --enable-libplacebo --enable-opencl --enable-libcdio --enable-libgme --enable-libmodplug --enable-libopenmpt --enable-libopencore-amrwb --enable-libmp3lame --enable-libshine --enable-libtheora --enable-libtwolame --enable-libvo-amrwbenc --enable-libcodec2 --enable-libilbc --enable-libgsm --enable-libopencore-amrnb --enable-libopus --enable-libspeex --enable-libvorbis --enable-ladspa --enable-libbs2b --enable-libflite --enable-libmysofa --enable-librubberband --enable-libsoxr --enable-chromaprint
  libavutil      59.  8.100 / 59.  8.100
  libavcodec     61.  3.100 / 61.  3.100
  libavformat    61.  1.100 / 61.  1.100
  libavdevice    61.  1.100 / 61.  1.100
  libavfilter    10.  1.100 / 10.  1.100
  libswscale      8.  1.100 /  8.  1.100
  libswresample   5.  1.100 /  5.  1.100
  libpostproc    58.  1.100 / 58.  1.100
[mov,mp4,m4a,3gp,3g2,mj2 @ 000002a562ff0e80] stream 0, offset 0x30: partial file
[mov,mp4,m4a,3gp,3g2,mj2 @ 000002a562ff0e80] Could not find codec parameters for stream 1 (Video: h264 (avc1 / 0x31637661), none, 720x1280, 3093 kb/s): unspecified pixel format
Consider increasing the value for the 'analyzeduration' (0) and 'probesize' (5000000) options
Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'pipe:0':
  Metadata:
    major_brand     : isom
    minor_version   : 512
    compatible_brands: isomiso2avc1mp41
    creation_time   : 2024-08-09T20:00:29.000000Z
  Duration: 00:00:06.80, start: 0.000000, bitrate: N/A
  Stream #0:0[0x1](eng): Audio: aac (mp4a / 0x6134706D), 22050 Hz, stereo, fltp, 74 kb/s (default)
      Metadata:
        creation_time   : 2024-08-09T20:00:23.000000Z
        handler_name    : SoundHandle
        vendor_id       : [0][0][0][0]
  Stream #0:1[0x2](eng): Video: h264 (avc1 / 0x31637661), none, 720x1280, 3093 kb/s, 30 fps, 30 tbr, 90k tbn (default)
      Metadata:
        creation_time   : 2024-08-09T20:00:23.000000Z
        handler_name    : VideoHandle
        vendor_id       : [0][0][0][0]
Stream mapping:
  Stream #0:1 -> #0:0 (h264 (native) -> mjpeg (native))
[mov,mp4,m4a,3gp,3g2,mj2 @ 000002a562ff0e80] stream 1, offset 0x5d: partial file
[in#0/mov,mp4,m4a,3gp,3g2,mj2 @ 000002a562fda2c0] Error during demuxing: Invalid data found when processing input
Cannot determine format of input 0:1 after EOF
[vf#0:0 @ 000002a5636c0ec0] Task finished with error code: -1094995529 (Invalid data found when processing input)
[vf#0:0 @ 000002a5636c0ec0] Terminating thread with return code -1094995529 (Invalid data found when processing input)
[vost#0:0/mjpeg @ 000002a5636c0400] Could not open encoder before EOF
[vost#0:0/mjpeg @ 000002a5636c0400] Task finished with error code: -22 (Invalid argument)
[vost#0:0/mjpeg @ 000002a5636c0400] Terminating thread with return code -22 (Invalid argument)
[out#0/image2 @ 000002a562ff5640] Nothing was written into output file, because at least one of its streams received no packets.
frame=    0 fps=0.0 q=0.0 Lsize=       0KiB time=N/A bitrate=N/A speed=N/A
Conversion failed!


    


    Logs for the same video, but ran via terminal :

    


    ffmpeg version 7.0.2-full_build-www.gyan.dev Copyright (c) 2000-2024 the FFmpeg developers
  built with gcc 13.2.0 (Rev5, Built by MSYS2 project)
  configuration: --enable-gpl --enable-version3 --enable-static --disable-w32threads --disable-autodetect --enable-fontconfig --enable-iconv --enable-gnutls --enable-libxml2 --enable-gmp --enable-bzlib --enable-lzma --enable-libsnappy --enable-zlib --enable-librist --enable-libsrt --enable-libssh --enable-libzmq --enable-avisynth --enable-libbluray --enable-libcaca --enable-sdl2 --enable-libaribb24 --enable-libaribcaption --enable-libdav1d --enable-libdavs2 --enable-libuavs3d --enable-libxevd --enable-libzvbi --enable-librav1e --enable-libsvtav1 --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxavs2 --enable-libxeve --enable-libxvid --enable-libaom --enable-libjxl --enable-libopenjpeg --enable-libvpx --enable-mediafoundation --enable-libass --enable-frei0r --enable-libfreetype --enable-libfribidi --enable-libharfbuzz --enable-liblensfun --enable-libvidstab --enable-libvmaf --enable-libzimg --enable-amf --enable-cuda-llvm --enable-cuvid --enable-dxva2 --enable-d3d11va --enable-d3d12va --enable-ffnvcodec --enable-libvpl --enable-nvdec --enable-nvenc --enable-vaapi --enable-libshaderc --enable-vulkan --enable-libplacebo --enable-opencl --enable-libcdio --enable-libgme --enable-libmodplug --enable-libopenmpt --enable-libopencore-amrwb --enable-libmp3lame --enable-libshine --enable-libtheora --enable-libtwolame --enable-libvo-amrwbenc --enable-libcodec2 --enable-libilbc --enable-libgsm --enable-libopencore-amrnb --enable-libopus --enable-libspeex --enable-libvorbis --enable-ladspa --enable-libbs2b --enable-libflite --enable-libmysofa --enable-librubberband --enable-libsoxr --enable-chromaprint
  libavutil      59.  8.100 / 59.  8.100
  libavcodec     61.  3.100 / 61.  3.100
  libavformat    61.  1.100 / 61.  1.100
  libavdevice    61.  1.100 / 61.  1.100
  libavfilter    10.  1.100 / 10.  1.100
  libswscale      8.  1.100 /  8.  1.100
  libswresample   5.  1.100 /  5.  1.100
  libpostproc    58.  1.100 / 58.  1.100
Input #0, mov,mp4,m4a,3gp,3g2,mj2, from '.\video_2024-08-10_00-03-00.mp4':
  Metadata:
    major_brand     : isom
    minor_version   : 512
    compatible_brands: isomiso2avc1mp41
    creation_time   : 2024-08-09T20:00:29.000000Z
  Duration: 00:00:06.80, start: 0.000000, bitrate: 3175 kb/s
  Stream #0:0[0x1](eng): Audio: aac (HE-AAC) (mp4a / 0x6134706D), 44100 Hz, stereo, fltp, 74 kb/s (default)
      Metadata:
        creation_time   : 2024-08-09T20:00:23.000000Z
        handler_name    : SoundHandle
        vendor_id       : [0][0][0][0]
  Stream #0:1[0x2](eng): Video: h264 (Baseline) (avc1 / 0x31637661), yuv420p(tv, bt709, progressive), 720x1280, 3093 kb/s, 30 fps, 30 tbr, 90k tbn (default)
      Metadata:
        creation_time   : 2024-08-09T20:00:23.000000Z
        handler_name    : VideoHandle
        vendor_id       : [0][0][0][0]
Stream mapping:
  Stream #0:1 -> #0:0 (h264 (native) -> mjpeg (native))
Press [q] to stop, [?] for help
[swscaler @ 00000219eb4d0c00] deprecated pixel format used, make sure you did set range correctly
Output #0, image2, to 'output_image.jpg':
  Metadata:
    major_brand     : isom
    minor_version   : 512
    compatible_brands: isomiso2avc1mp41
    encoder         : Lavf61.1.100
  Stream #0:0(eng): Video: mjpeg, yuvj420p(pc, unknown/bt709/bt709, progressive), 720x1280, q=2-31, 200 kb/s, 30 fps, 30 tbn (default)
      Metadata:
        creation_time   : 2024-08-09T20:00:23.000000Z
        handler_name    : VideoHandle
        vendor_id       : [0][0][0][0]
        encoder         : Lavc61.3.100 mjpeg
      Side data:
        cpb: bitrate max/min/avg: 0/0/200000 buffer size: 0 vbv_delay: N/A
[image2 @ 00000219e7aa51c0] The specified filename 'output_image.jpg' does not contain an image sequence pattern or a pattern is invalid.
[image2 @ 00000219e7aa51c0] Use a pattern such as %03d for an image sequence or use the -update option (with -frames:v 1 if needed) to write a single image.
[out#0/image2 @ 00000219e7b5e400] video:49KiB audio:0KiB subtitle:0KiB other streams:0KiB global headers:0KiB muxing overhead: unknown
frame=    1 fps=0.0 q=3.0 Lsize=N/A time=00:00:00.03 bitrate=N/A speed=0.322x


    


    I also realized that the problem was not related to the video orientation, but to to the video from a specific source uploaded specifically on my server 🤡 Such a weird coincidence that I decided to test my video upload with those files, but anyway. And those are.... Downloaded instagram reels lol. But again, ffmpeg works just fine when ran in terminal

    


  • how to stop the FFmpeg process programmatically without using Ctrl + C ?

    30 septembre 2024, par bee
    const shell = require("shelljs");

const processShell = shell.exec(
  `ffmpeg -i "https://pull-hls-f16-va01.tiktokcdn.com/game/stream-2998228870023348312_or4/index.m3u8?expire=1728629296&session_id=000-2024092706481532076B1319E1100113F8&sign=1016b521d08053bc0ae8eddb0881b029" -movflags use_metadata_tags -map_metadata 0 -metadata title="Chill chill kiß║┐m k├¿o Warthunder" -metadata artist="bacgaucam" -metadata year="2024" -c copy "downloads/bacgaucam-927202491939.mp4" -n -stats -hide_banner -loglevel error`,
  { async: true }
);

setTimeout(() => {
  // processShell.kill();
  process.exit();
}, 20000);


    


    my video only works when I use Ctrl+C to stop it. I’ve tried using process.exit(), .kill(pid, "SIGINT"), and the .kill() method from the shell.exec() ffmpeg() of fluent-ffmpeg or spawn() of child_process reference, but none of them work

    


    If you want to test it directly, please message me to get a new live url in case it expires (https://t.me/ppnam15) or clone this :
https://github.com/loo-kuhs/tiktok-live-downloader

    


    can anyone help ? Thanks !

    


  • get error ffmpeg when running wdio-video-reporter in jenkins and centos

    31 janvier 2024, par Ferawati Hartanti Pratiwi

    i got this error when i run wdio-video-reporter on jenkins and the OS is centos 8

    


    

    2024-01-31T17:54:56.047Z ERROR @wdio/config:ConfigParser: Failed loading configuration file:


    


    file :///var/data/jenkins-slave/workspace/QE_Playground/web-testing-pr-only/test/support/wdio.conf.chrome.js :
undefined
Could not find ffmpeg executable, tried "/var/data/jenkins-slave/workspace/QE_Playground/web-testing-pr-only/node_modules/@ffmpeg-installer/linux-x64/ffmpeg",
"/var/data/jenkins-slave/workspace/QE_Playground/web-testing-pr-only/node_modules/@ffmpeg-installer/ffmpeg/node_modules/@ffmpeg-installer/linux-x64/ffmpeg"
and
"/var/data/jenkins-slave/workspace/QE_Playground/web-testing-pr-only/node_modules/@ffmpeg-installer/linux-x64/ffmpeg"

    


    


    this is my jenkins env

    


      environment {
    PATH = "/usr/bin/ffmpeg:$PATH"
  }


    


    this is my wdio config

    


      ffmpegPath: '/usr/bin/ffmpeg',
  capabilities: [
    {
      maxInstances: parseInt(process.env.MAX_INSTANCES, 10) || 3,
      specs: [
        `${process.cwd()}/test/**_${folder}/features/**/*.feature`,
      ],
      browserName: 'chrome',
      'goog:chromeOptions': browserOptions,
      acceptInsecureCerts: true,
    },
  ],


    


Navigation