Recherche avancée

Sur d’autres sites (5292)

• FFMPEG fails with only two input frames

  3 mars 2019, par JeffThompson

  I’d like to use ffmpeg’s great frame interpolation to blend two images. I get great results when testing with about a dozen frames, but when only using two it finishes immediately and I get a video file that can’t be opened.

  My command :

  ffmpeg -y -r 24 -pattern_type glob -i "TestFrames/*[0-1].png" -pix_fmt yuv420p -filter:v "minterpolate='mi_mode=mci:mc_mode=aobmc:me_mode=bidir:vsbmc=1:fps=1024'" -vsync 2 8.mp4

  Output from ffmpeg :

  ffmpeg version 4.1.1 Copyright (c) 2000-2019 the FFmpeg developers
  
    built with Apple LLVM version 10.0.0 (clang-1000.11.45.5)
  
    configuration: --prefix=/usr/local/Cellar/ffmpeg/4.1.1 --enable-shared --enable-pthreads --enable-version3 --enable-hardcoded-tables --enable-avresample --cc=clang --host-cflags='-I/Library/Java/JavaVirtualMachines/openjdk-11.0.2.jdk/Contents/Home/include -I/Library/Java/JavaVirtualMachines/openjdk-11.0.2.jdk/Contents/Home/include/darwin' --host-ldflags= --enable-ffplay --enable-gnutls --enable-gpl --enable-libaom --enable-libbluray --enable-libmp3lame --enable-libopus --enable-librubberband --enable-libsnappy --enable-libtesseract --enable-libtheora --enable-libvorbis --enable-libvpx --enable-libx264 --enable-libx265 --enable-libxvid --enable-lzma --enable-libfontconfig --enable-libfreetype --enable-frei0r --enable-libass --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-librtmp --enable-libspeex --enable-videotoolbox --disable-libjack --disable-indev=jack --enable-libaom --enable-libsoxr
  
    libavutil      56. 22.100 / 56. 22.100
  
    libavcodec     58. 35.100 / 58. 35.100
  
    libavformat    58. 20.100 / 58. 20.100
  
    libavdevice    58.  5.100 / 58.  5.100
  
    libavfilter     7. 40.101 /  7. 40.101
  
    libavresample   4.  0.  0 /  4.  0.  0
  
    libswscale      5.  3.100 /  5.  3.100
  
    libswresample   3.  3.100 /  3.  3.100
  
    libpostproc    55.  3.100 / 55.  3.100
  
  Input #0, image2, from 'TestFrames/*.png':
  
    Duration: 00:00:00.08, start: 0.000000, bitrate: N/A
  
      Stream #0:0: Video: png, rgba(pc), 1080x1080, 25 tbr, 25 tbn, 25 tbc
  
  Stream mapping:
  
    Stream #0:0 -> #0:0 (png (native) -> h264 (libx264))
  
  Press [q] to stop, [?] for help
  
  [libx264 @ 0x7fa5c2813200] using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2 AVX FMA3 BMI2 AVX2
  
  [libx264 @ 0x7fa5c2813200] profile High, level 6.1
  
  [libx264 @ 0x7fa5c2813200] 264 - core 155 r2917 0a84d98 - H.264/MPEG-4 AVC codec - Copyleft 2003-2018 - http://www.videolan.org/x264.html - options: cabac=1 ref=3 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=7 psy=1 psy_rd=1.00:0.00 mixed_ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=-2 threads=12 lookahead_threads=2 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2 b_adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=25 scenecut=40 intra_refresh=0 rc_lookahead=40 rc=crf mbtree=1 crf=23.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00
  
  Output #0, mp4, to '8.mp4':
  
    Metadata:
  
      encoder         : Lavf58.20.100
  
      Stream #0:0: Video: h264 (libx264) (avc1 / 0x31637661), yuv420p, 1080x1080, q=-1--1, 1024 fps, 16384 tbn, 1024 tbc
  
      Metadata:
  
        encoder         : Lavc58.35.100 libx264
  
      Side data:
  
        cpb: bitrate max/min/avg: 0/0/0 buffer size: 0 vbv_delay: -1
  
  frame=    0 fps=0.0 q=0.0 Lsize=       0kB time=00:00:00.00 bitrate=N/A speed=   0x    
  
  video:0kB audio:0kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: unknown

  (Why fps=1024 ? I wanted to generate a a bunch of frames between the two images, so I plan to later separate the resulting video into separate images.)

• FFMPEG : RTSP re-stream dies randomly

  14 mai 2018, par stevendesu

  I have a security camera streaming RTSP, and I wish to re-stream this to an RTMP ingest server. For now I’m using my laptop as an ffmpeg proxy, but eventually I’ll use a raspberry pi or something similar (cheap/small)

  Here’s the command I’m using (pretty simple) :

  ffmpeg -i rtsp://@10.0.0.16:554/1/h264major -c:v libx264 -c:a none -f flv rtmp://output/camera_stream

  This works but after a minute or two the stream dies. Here’s the output :

  ffmpeg version N-90057-g7c82e0f Copyright (c) 2000-2018 the FFmpeg developers
  
    built with gcc 5.4.0 (Ubuntu 5.4.0-6ubuntu1~16.04.6) 20160609
  
    configuration: --prefix=/home/sbarnett/ffmpeg_build --pkg-config-flags=--static --extra-cflags=-I/home/sbarnett/ffmpeg_build/include --extra-ldflags=-L/home/sbarnett/ffmpeg_build/lib --extra-libs='-lpthread -lm' --bindir=/home/sbarnett/bin --enable-gpl --enable-libass --enable-libfdk-aac --enable-libfreetype --enable-libmp3lame --enable-libopus --enable-libtheora --enable-libvorbis --enable-libvpx --enable-libx264 --enable-libx265 --enable-libspeex --enable-nonfree
  
    libavutil      56.  7.101 / 56.  7.101
  
    libavcodec     58. 11.101 / 58. 11.101
  
    libavformat    58.  9.100 / 58.  9.100
  
    libavdevice    58.  1.100 / 58.  1.100
  
    libavfilter     7. 12.100 /  7. 12.100
  
    libswscale      5.  0.101 /  5.  0.101
  
    libswresample   3.  0.101 /  3.  0.101
  
    libpostproc    55.  0.100 / 55.  0.100
  
  Input #0, rtsp, from 'rtsp://@10.0.0.16:554/1/h264major':
  
    Metadata:
  
      title           : h264major
  
      comment         : h264major
  
    Duration: N/A, start: 0.360000, bitrate: N/A
  
      Stream #0:0: Video: h264 (Main), yuvj420p(pc, bt709, progressive), 720x480, 25 fps, 25 tbr, 90k tbn, 50 tbc
  
  Stream mapping:
  
    Stream #0:0 -> #0:0 (h264 (native) -> h264 (libx264))
  
  Press [q] to stop, [?] for help
  
  [libx264 @ 0x38843c0] using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2 AVX FMA3 BMI2 AVX2
  
  [libx264 @ 0x38843c0] profile High, level 3.0
  
  [libx264 @ 0x38843c0] 264 - core 155 - H.264/MPEG-4 AVC codec - Copyleft 2003-2018 - http://www.videolan.org/x264.html - options: cabac=1 ref=3 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=7 psy=1 psy_rd=1.00:0.00 mixed_ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=-2 threads=6 lookahead_threads=1 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2 b_adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=25 scenecut=40 intra_refresh=0 rc_lookahead=40 rc=crf mbtree=1 crf=23.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00
  
  Output #0, flv, to 'rtmp://output/camera_stream':
  
    Metadata:
  
      title           : h264major
  
      comment         : h264major
  
      encoder         : Lavf58.9.100
  
      Stream #0:0: Video: h264 (libx264) ([7][0][0][0] / 0x0007), yuvj420p(pc), 720x480, q=-1--1, 25 fps, 1k tbn, 25 tbc
  
      Metadata:
  
        encoder         : Lavc58.11.101 libx264
  
      Side data:
  
        cpb: bitrate max/min/avg: 0/0/0 buffer size: 0 vbv_delay: -1
  
  Past duration 0.999992 too large
  
      Last message repeated 29 times
  
  [rtsp @ 0x3847600] max delay reached. need to consume packet
  
  [rtsp @ 0x3847600] RTP: missed 48 packets
  
  Past duration 0.999992 too large
  
      Last message repeated 4 times
  
  frame=   44 fps=0.0 q=0.0 size=       0kB time=00:00:00.00 bitrate=N/A dup=0 drop=5 speed=   0x    
  
  frame=   57 fps= 54 q=28.0 size=      43kB time=00:00:00.16 bitrate=2186.4kbits/s dup=0 drop=5 speed=0.153x    
  
  ... (lots of similar messages) ...   
  
  frame= 1163 fps= 26 q=28.0 size=    1341kB time=00:00:44.84 bitrate= 245.0kbits/s dup=0 drop=5 speed=0.99x    
  
  frame= 1177 fps= 26 q=28.0 size=    1353kB time=00:00:45.40 bitrate= 244.2kbits/s dup=0 drop=5 speed=0.99x    
  
  [rtsp @ 0x3847600] max delay reached. need to consume packet
  
  [rtsp @ 0x3847600] RTP: missed 2 packets
  
  frame= 1190 fps= 26 q=28.0 size=    1370kB time=00:00:45.92 bitrate= 244.4kbits/s dup=0 drop=5 speed=0.99x    
  
  [h264 @ 0x38c08c0] Increasing reorder buffer to 1
  
  frame= 1201 fps= 26 q=28.0 size=    1381kB time=00:00:46.36 bitrate= 244.0kbits/s dup=0 drop=5 speed=0.989x    
  
  frame= 1214 fps= 26 q=28.0 size=    1393kB time=00:00:46.88 bitrate= 243.4kbits/s dup=0 drop=5 speed=0.989x    
  
  ... (lots of similar messages) ...    
  
  frame= 1761 fps= 25 q=28.0 size=    2030kB time=00:01:08.80 bitrate= 241.7kbits/s dup=0 drop=5 speed=0.993x    
  
  frame= 1774 fps= 25 q=28.0 size=    2041kB time=00:01:09.32 bitrate= 241.2kbits/s dup=0 drop=5 speed=0.993x    
  
  [flv @ 0x3884900] Failed to update header with correct duration.
  
  [flv @ 0x3884900] Failed to update header with correct filesize.
  
  frame= 1782 fps= 25 q=-1.0 Lsize=    2127kB time=00:01:11.64 bitrate= 243.2kbits/s dup=0 drop=5 speed=1.02x    
  
  video:2092kB audio:0kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: 1.679417%
  
  [libx264 @ 0x38843c0] frame I:8     Avg QP:16.89  size: 42446
  
  [libx264 @ 0x38843c0] frame P:1672  Avg QP:19.54  size:  1065
  
  [libx264 @ 0x38843c0] frame B:102   Avg QP:23.00  size:   205
  
  [libx264 @ 0x38843c0] consecutive B-frames: 92.4%  0.0%  0.0%  7.6%
  
  [libx264 @ 0x38843c0] mb I  I16..4: 12.9% 36.2% 50.9%
  
  [libx264 @ 0x38843c0] mb P  I16..4:  0.2%  0.2%  0.0%  P16..4: 16.7%  0.7%  1.0%  0.0%  0.0%    skip:81.1%
  
  [libx264 @ 0x38843c0] mb B  I16..4:  0.1%  0.1%  0.0%  B16..8: 11.7%  0.1%  0.0%  direct: 1.5%  skip:86.5%  L0:62.2% L1:35.3% BI: 2.5%
  
  [libx264 @ 0x38843c0] 8x8 transform intra:40.8% inter:47.4%
  
  [libx264 @ 0x38843c0] coded y,uvDC,uvAC intra: 46.5% 53.0% 17.2% inter: 3.9% 8.7% 0.0%
  
  [libx264 @ 0x38843c0] i16 v,h,dc,p: 21% 56%  8% 15%
  
  [libx264 @ 0x38843c0] i8 v,h,dc,ddl,ddr,vr,hd,vl,hu: 23% 33% 31%  1%  2%  3%  2%  2%  3%
  
  [libx264 @ 0x38843c0] i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 25% 39%  9%  3%  3%  4%  5%  3%  8%
  
  [libx264 @ 0x38843c0] i8c dc,h,v,p: 43% 33% 21%  3%
  
  [libx264 @ 0x38843c0] Weighted P-Frames: Y:0.0% UV:0.0%
  
  [libx264 @ 0x38843c0] ref P L0: 88.0%  1.4%  6.6%  4.0%
  
  [libx264 @ 0x38843c0] ref B L0: 99.4%  0.5%  0.1%
  
  [libx264 @ 0x38843c0] ref B L1: 99.4%  0.6%
  
  [libx264 @ 0x38843c0] kb/s:238.73

  The camera is pretty cheap (from China) so it’s likely I’m getting bad data from it or it’s cutting out for a few seconds at a time. Ideally I would need ffmpeg to handle this well (ignore bad data, wait as long as necessary for good data to resume encoding)

  Using ffplay to check out the RTSP stream, I get output like the following :

  $> ffplay -i rtsp://@10.0.0.16:554/1/h264major
  
  ffplay version N-90057-g7c82e0f Copyright (c) 2003-2018 the FFmpeg developers
  
    built with gcc 5.4.0 (Ubuntu 5.4.0-6ubuntu1~16.04.6) 20160609
  
    configuration: --prefix=/home/sbarnett/ffmpeg_build --pkg-config-flags=--static --extra-cflags=-I/home/sbarnett/ffmpeg_build/include --extra-ldflags=-L/home/sbarnett/ffmpeg_build/lib --extra-libs='-lpthread -lm' --bindir=/home/sbarnett/bin --enable-gpl --enable-libass --enable-libfdk-aac --enable-libfreetype --enable-libmp3lame --enable-libopus --enable-libtheora --enable-libvorbis --enable-libvpx --enable-libx264 --enable-libx265 --enable-libspeex --enable-nonfree
  
    libavutil      56.  7.101 / 56.  7.101
  
    libavcodec     58. 11.101 / 58. 11.101
  
    libavformat    58.  9.100 / 58.  9.100
  
    libavdevice    58.  1.100 / 58.  1.100
  
    libavfilter     7. 12.100 /  7. 12.100
  
    libswscale      5.  0.101 /  5.  0.101
  
    libswresample   3.  0.101 /  3.  0.101
  
    libpostproc    55.  0.100 / 55.  0.100
  
  Input #0, rtsp, from 'rtsp://@10.0.0.16:554/1/h264major':0B f=0/0
  
    Metadata:
  
      title           : h264major
  
      comment         : h264major
  
    Duration: N/A, start: 0.320000, bitrate: N/A
  
      Stream #0:0: Video: h264 (Main), yuvj420p(pc, bt709, progressive), 720x480, 25 fps, 25 tbr, 90k tbn, 50 tbc
  
  [swscaler @ 0x7f6bbc093180] deprecated pixel format used, make sure you did set range correctly
  
  [rtsp @ 0x7f6bc0000940] max delay reached. need to consume packet
  
  [rtsp @ 0x7f6bc0000940] RTP: missed 2 packets
  
  [h264 @ 0x7f6bc0041080] error while decoding MB 44 28, bytestream -37
  
  [h264 @ 0x7f6bc0041080] concealing 95 DC, 95 AC, 95 MV errors in I frame
  
  [rtsp @ 0x7f6bc0000940] max delay reached. need to consume packet
  
  [rtsp @ 0x7f6bc0000940] RTP: missed 1 packets
  
  [h264 @ 0x7f6bc0041080] error while decoding MB 43 29, bytestream -49
  
  [h264 @ 0x7f6bc0041080] concealing 51 DC, 51 AC, 51 MV errors in I frame
  
  [rtsp @ 0x7f6bc0000940] max delay reached. need to consume packet
  
  [rtsp @ 0x7f6bc0000940] RTP: missed 2 packets
  
  [h264 @ 0x7f6bc0041080] Increasing reorder buffer to 1
  
  [rtsp @ 0x7f6bc0000940] max delay reached. need to consume packet
  
  [rtsp @ 0x7f6bc0000940] RTP: missed 3 packets
  
  [h264 @ 0x7f6bc02c3600] error while decoding MB 27 29, bytestream -24
  
  [h264 @ 0x7f6bc02c3600] concealing 67 DC, 67 AC, 67 MV errors in I frame
  
  [rtsp @ 0x7f6bc0000940] max delay reached. need to consume packet
  
  [rtsp @ 0x7f6bc0000940] RTP: missed 2 packets
  
  [rtsp @ 0x7f6bc0000940] max delay reached. need to consume packet
  
  [rtsp @ 0x7f6bc0000940] RTP: missed 42 packets
  
  [rtsp @ 0x7f6bc0000940] max delay reached. need to consume packet
  
  [rtsp @ 0x7f6bc0000940] RTP: missed 2 packets

  Then eventually the video just freezes. The first time it froze after around 5 minutes, but I wasn’t able to say definitively if it froze the instant 44 packets were dropped or if it froze randomly later. So the second time I stared intently.... for 21 minutes. Then I got bored of it not freezing, turned to pet my cat, and when I looked back 15 seconds later it was frozen. I think it only breaks when no one is watching it.

  What I can say definitively is :

  • While running normally, M-V hovers around 0 (anywhere between -0.01 and +0.01)
  • Once frozen, M-V begins to count down into negative numbers without stopping - although at a rate slower than -1 per second
  • While running normally, aq is 0KB and vq is a positive number (I think it was 30KB or so ?)
  • Once frozen, vq is also 0KB

  It’s a really cheap camera with a crummy power supply that goes out if you breathe on it, so it’s likely the camera is going temporarily offline during this time — but I’d like ffmpeg to wait out a timeout and resume streaming when it sees the camera again.

• av_interleaved_write_frame() : Connection reset by peer mjpeg : What is wrong with mjpeg stream, ffserver and ffplay ?

  31 décembre 2016, par Ilya Yevlampiev

  I’m creating mjpeg stream from image files using ffmpeg and write it to ffserver’s feed :

  sudo ffmpeg -loop 1 -i fon.jpeg -vcodec mjpeg -f mjpeg http://localhost:8090/feed1.ffm
  
  
  
  ffmpeg version 2.0 Copyright (c) 2000-2013 the FFmpeg developers
  
  built on Aug 19 2013 23:10:58 with gcc 4.7 (Debian 4.7.2-5)
  
  configuration: 
  
  libavutil      52. 38.100 / 52. 38.100
  
  libavcodec     55. 18.102 / 55. 18.102
  
  libavformat    55. 12.100 / 55. 12.100
  
  libavdevice    55.  3.100 / 55.  3.100
  
  libavfilter     3. 79.101 /  3. 79.101
  
  libswscale      2.  3.100 /  2.  3.100
  
  libswresample   0. 17.102 /  0. 17.102
  
  Input #0, image2, from 'fon.jpeg':
  
  Duration: 00:00:00.04, start: 0.000000, bitrate: N/A
  
  Stream #0:0: Video: mjpeg, yuvj420p, 1280x720 [SAR 1:1 DAR 16:9], 25 fps, 25 tbr, 25 tbn, 25 tbc
  
  Output #0, mjpeg, to 'http://localhost:8090/feed1.ffm':
  
  Metadata:
  
  encoder         : Lavf55.12.100
  
  Stream #0:0: Video: mjpeg, yuvj420p, 1280x720 [SAR 1:1 DAR 16:9], q=2-31, 200 kb/s, 90k tbn, 25 tbc
  
  Stream mapping:
  
  Stream #0:0 -> #0:0 (mjpeg -> mjpeg)
  
  Press [q] to stop, [?] for help

  ffserver is configured as

  Port 8090
  
  RTSPPort 8594
  
  BindAddress 0.0.0.0
  
  MaxClients 100
  
  MaxBandwidth 20000
  
  NoDaemon
  
  <feed>
  
  File /tmp/feed.ffm
  
  FileMaxSize 3M
  
  </feed>
  
  <stream>
  
  Feed feed.ffm
  
  Format rtsp
  
  VideoCodec mjpeg
  
  VideoFrameRate 30
  
  VideoBufferSize 80000
  
  VideoBitRate 200
  
  VideoQMin 1
  
  VideoQMax 5
  
  VideoSize 1280x720
  
  PreRoll 1
  
  Noaudio
  
  </stream>
  
  <stream>
  
  Feed feed.ffm
  
  Format swf
  
  VideoCodec flv
  
  VideoFrameRate 30
  
  VideoBufferSize 50000
  
  VideoBitRate 100
  
  VideoQMin 1
  
  VideoQMax 5
  
  VideoSize 1280x720
  
  PreRoll 0
  
  Noaudio
  
  </stream>

  Then I’m trying to retrieve the rtsp stream from the ffserver :

  ffplay http://localhost:8090/test.rtsp -loglevel debug
  
  avplay version 0.8.5-6:0.8.5-1, Copyright (c) 2003-2012 the Libav developers
  
  built on Jan 13 2013 12:05:48 with gcc 4.7.2
  
  configuration: --arch=amd64 --enable-pthreads --enable-runtime-cpudetect --extra-         version='6:0.8.5-1' --libdir=/usr/lib/x86_64-linux-gnu --prefix=/usr --enable-bzlib --enable-libdc1394 --enable-libdirac --enable-libfreetype --enable-frei0r --enable-gnutls --enable-libgsm --enable-libmp3lame --enable-librtmp --enable-libopencv --enable-libopenjpeg --enable-libpulse --enable-libschroedinger --enable-libspeex --enable-libtheora --enable-vaapi --enable-vdpau --enable-libvorbis --enable-libvpx --enable-zlib --enable-gpl --enable-postproc --enable-swscale --enable-libcdio --enable-x11grab --enable-libx264 --enable-libxvid --shlibdir=/usr/lib/x86_64-linux-gnu --enable-shared --disable-static

  avutil configuration : —arch=amd64 —enable-pthreads —enable-runtime-cpudetect —extra-version=’6:0.8.4-1’ —libdir=/usr/lib/x86_64-linux-gnu —prefix=/usr —enable-bzlib —enable-libdc1394 —enable-libdirac —enable-libfreetype —enable-frei0r —enable-gnutls —enable-libgsm —enable-libmp3lame —enable-librtmp —enable-libopencv —enable-libopenjpeg —enable-libpulse —enable-libschroedinger —enable-libspeex —enable-libtheora —enable-vaapi —enable-vdpau —enable-libvorbis —enable-libvpx —enable-zlib —enable-gpl —enable-postproc —enable-swscale —enable-libcdio —enable-x11grab —enable-libx264 —enable-libxvid —shlibdir=/usr/lib/x86_64-linux-gnu —enable-shared —disable-static
  avcodec configuration : —arch=amd64 —enable-pthreads —enable-runtime-cpudetect —extra-version=’6:0.8.4-1’ —libdir=/usr/lib/x86_64-linux-gnu —prefix=/usr —enable-bzlib —enable-libdc1394 —enable-libdirac —enable-libfreetype —enable-frei0r —enable-gnutls —enable-libgsm —enable-libmp3lame —enable-librtmp —enable-libopencv —enable-libopenjpeg —enable-libpulse —enable-libschroedinger —enable-libspeex —enable-libtheora —enable-vaapi —enable-vdpau —enable-libvorbis —enable-libvpx —enable-zlib —enable-gpl —enable-postproc —enable-swscale —enable-libcdio —enable-x11grab —enable-libx264 —enable-libxvid —shlibdir=/usr/lib/x86_64-linux-gnu —enable-shared —disable-static
  avformat configuration : —arch=amd64 —enable-pthreads —enable-runtime-cpudetect —extra-version=’6:0.8.4-1’ —libdir=/usr/lib/x86_64-linux-gnu —prefix=/usr —enable-bzlib —enable-libdc1394 —enable-libdirac —enable-libfreetype —enable-frei0r —enable-gnutls —enable-libgsm —enable-libmp3lame —enable-librtmp —enable-libopencv —enable-libopenjpeg —enable-libpulse —enable-libschroedinger —enable-libspeex —enable-libtheora —enable-vaapi —enable-vdpau —enable-libvorbis —enable-libvpx —enable-zlib —enable-gpl —enable-postproc —enable-swscale —enable-libcdio —enable-x11grab —enable-libx264 —enable-libxvid —shlibdir=/usr/lib/x86_64-linux-gnu —enable-shared —disable-static
  swscale configuration : —arch=amd64 —enable-pthreads —enable-runtime-cpudetect —extra-version=’6:0.8.4-1’ —libdir=/usr/lib/x86_64-linux-gnu —prefix=/usr —enable-bzlib —enable-libdc1394 —enable-libdirac —enable-libfreetype —enable-frei0r —enable-gnutls —enable-libgsm —enable-libmp3lame —enable-librtmp —enable-libopencv —enable-libopenjpeg —enable-libpulse —enable-libschroedinger —enable-libspeex —enable-libtheora —enable-vaapi —enable-vdpau —enable-libvorbis —enable-libvpx —enable-zlib —enable-gpl —enable-postproc —enable-swscale —enable-libcdio —enable-x11grab —enable-libx264 —enable-libxvid —shlibdir=/usr/lib/x86_64-linux-gnu —enable-shared —disable-static
  postproc configuration : —arch=amd64 —enable-pthreads —enable-runtime-cpudetect —extra-version=’6:0.8.4-1’ —libdir=/usr/lib/x86_64-linux-gnu —prefix=/usr —enable-bzlib —enable-libdc1394 —enable-libdirac —enable-libfreetype —enable-frei0r —enable-gnutls —enable-libgsm —enable-libmp3lame —enable-librtmp —enable-libopencv —enable-libopenjpeg —enable-libpulse —enable-libschroedinger —enable-libspeex —enable-libtheora —enable-vaapi —enable-vdpau —enable-libvorbis —enable-libvpx —enable-zlib —enable-gpl —enable-postproc —enable-swscale —enable-libcdio —enable-x11grab —enable-libx264 —enable-libxvid —shlibdir=/usr/lib/x86_64-linux-gnu —enable-shared —disable-static

   libavutil    51. 22. 1 / 51. 22. 1
  
   libavcodec   53. 35. 0 / 53. 35. 0
  
   libavformat  53. 21. 1 / 53. 21. 0
  
   libavdevice  53.  2. 0 / 53.  2. 0
  
   libavfilter   2. 15. 0 /  2. 15. 0
  
   libswscale    2.  1. 0 /  2.  1. 0
  
   libpostproc  52.  0. 0 / 52.  0. 0
  
   http://localhost:8090/test.rtsp: Invalid data found when processing input

  So, what is wrong in this streaming example, if I have no problem when I substitute streams to the files ?

  I create a mjpeg file using the same parameters 9i.e. file is an output insteadof stream)

  sudo ffmpeg -loop 1 -i fon.jpeg -vcodec mjpeg -f mjpeg test.mjpg
  
  ffmpeg version 2.0 Copyright (c) 2000-2013 the FFmpeg developers
  
  built on Aug 19 2013 23:10:58 with gcc 4.7 (Debian 4.7.2-5)
  
  configuration: 
  
  libavutil      52. 38.100 / 52. 38.100
  
  libavcodec     55. 18.102 / 55. 18.102
  
  libavformat    55. 12.100 / 55. 12.100
  
  libavdevice    55.  3.100 / 55.  3.100
  
  libavfilter     3. 79.101 /  3. 79.101
  
  libswscale      2.  3.100 /  2.  3.100
  
  libswresample   0. 17.102 /  0. 17.102
  
  Input #0, image2, from 'fon.jpeg':
  
  Duration: 00:00:00.04, start: 0.000000, bitrate: N/A
  
  Stream #0:0: Video: mjpeg, yuvj420p, 1280x720 [SAR 1:1 DAR 16:9], 25 fps, 25 tbr, 25 tbn, 25 tbc
  
  Output #0, mjpeg, to 'test.mjpg':
  
  Metadata:
  
  encoder         : Lavf55.12.100
  
  Stream #0:0: Video: mjpeg, yuvj420p, 1280x720 [SAR 1:1 DAR 16:9], q=2-31, 200 kb/s, 90k tbn, 25 tbc
  
  Stream mapping:
  
  Stream #0:0 -> #0:0 (mjpeg -> mjpeg)
  
  Press [q] to stop, [?] for help
  
  frame=   36 fps=0.0 q=0.0 size=     888kB time=00:00:01.36 bitrate=5349.2kbits/sframe=   78 fps= 76 q=0.0 size=    1711kB time=00:00:03.04 bitrate=4609.9kbits/sframe=  120 fps= 78 q=0.0 size=    2533kB time=00:00:04.72 bitrate=4396.9kbits/sframe=  161 fps= 79 q=0.0 size=    3336kB time=00:00:06.36 bitrate=4297.5kbits/sframe=  202 fps= 79 q=0.0 size=    4139kB       
  
  time=00:00:08.00 bitrate=4238.8kbits/sframe=  243 fps= 79 q=0.0 size=    4943kB  
  
  time=00:00:09.64 bitrate=4200.1kbits/sframe=  282 fps= 79 q=0.0 size=    5706kB 
  
  time=00:00:11.20 bitrate=4173.9kbits/sframe=  321 fps= 79 q=0.0 size=    6470kB  
  
  time=00:00:12.76 bitrate=4154.0kbits/sframe=  358 fps= 78 q=0.0 size=    7195kB 
  
  time=00:00:14.24 bitrate=4139.2kbits/sframe=  397 fps= 68 q=0.0 size=    7959kB 
  
  time=00:00:15.80 bitrate=4126.6kbits/s    
  
  [1]+  Stopped sudo ffmpeg -loop 1 -i fon.jpeg -vcodec mjpeg -f mjpeg test.mjpg

  And then I playback this mjpeg file with ffplay. The play back is correct, I see no errors or exceptions.

  ffplay test.mjpg
  
  avplay version 0.8.5-6:0.8.5-1, Copyright (c) 2003-2012 the Libav developers
  
  built on Jan 13 2013 12:05:48 with gcc 4.7.2
  
  [mjpeg @ 0x7fc3680008c0] max_analyze_duration reached
  
  [mjpeg @ 0x7fc3680008c0] Estimating duration from bitrate, this may be inaccurate
  
  Input #0, mjpeg, from 'test.mjpg':
  
  Duration: N/A, bitrate: N/A
  
  Stream #0.0: Video: mjpeg, yuvj420p, 1280x720 [PAR 1:1 DAR 16:9], 25 fps, 25 tbr, 1200k tbn, 1200k tbc
  
  [avsink @ 0x7fc360001020] auto-inserting filter 'auto-inserted scaler 0' between the filter 'src' and the filter 'out'
  
  [scale @ 0x7fc360001700] w:1280 h:720 fmt:yuvj420p -> w:1280 h:720 fmt:yuv420p flags:0x4
  
  27.99 A-V:  0.000 s:0.0 aq=    0KB vq=    0KB sq=    0B f=0/0   0/0

  So, what is the configuration issue for ffserver, or may be it is a bug of the ffserver ?

  UPD. I have realized, that i fed file1.ffm instead of file.ffm ; that caused some ffserver problem :

   Mon Sep  9 11:43:20 2013 [ffm @ 0x2110000]Format ffm probed with size=2048 and score=101
  
   Mon Sep  9 11:43:20 2013 Deleting feed file 'feed1.ffm' as stream counts differ (1 != 2)
  
   Mon Sep  9 11:43:20 2013 [AVIOContext @ 0x210d660]Statistics: 4096 bytes read, 0 seeks
  
   Mon Sep  9 11:43:20 2013 [AVIOContext @ 0x210a9a0]Statistics: 0 seeks, 1 writeouts
  
   Mon Sep  9 11:43:20 2013 FFserver started.
  
   Mon Sep  9 11:44:18 2013 File '/feed1.ffm' not found
  
   Mon Sep  9 11:44:18 2013 127.0.0.1 - - [POST] "/feed1.ffm HTTP/1.1" 404 149

  After i set a correct feed, i got another exception on ffmpeg side :

  sudo ffmpeg -loop 1 -i fon.jpeg -vcodec mjpeg -f mjpeg http://localhost:8090/feed.ffm
  
  ffmpeg version 2.0 Copyright (c) 2000-2013 the FFmpeg developers
  
  built on Aug 19 2013 23:10:58 with gcc 4.7 (Debian 4.7.2-5)
  
  configuration: 
  
  libavutil      52. 38.100 / 52. 38.100
  
  libavcodec     55. 18.102 / 55. 18.102
  
  libavformat    55. 12.100 / 55. 12.100
  
  libavdevice    55.  3.100 / 55.  3.100
  
  libavfilter     3. 79.101 /  3. 79.101
  
  libswscale      2.  3.100 /  2.  3.100
  
  libswresample   0. 17.102 /  0. 17.102
  
  Input #0, image2, from 'fon.jpeg':
  
  Duration: 00:00:00.04, start: 0.000000, bitrate: N/A
  
  Stream #0:0: Video: mjpeg, yuvj420p, 1280x720 [SAR 1:1 DAR 16:9], 25 fps, 25 tbr, 25 tbn, 25 tbc
  
  Output #0, mjpeg, to 'http://localhost:8090/feed.ffm':
  
  Metadata:
  
  encoder         : Lavf55.12.100
  
  Stream #0:0: Video: mjpeg, yuvj420p, 1280x720 [SAR 1:1 DAR 16:9], q=2-31, 200 kb/s, 90k tbn, 25 tbc
  
  Stream mapping:
  
  Stream #0:0 -> #0:0 (mjpeg -> mjpeg)
  
  Press [q] to stop, [?] for help
  
  av_interleaved_write_frame(): Connection reset by peer

  While ffserver shows no error at all :

  sudo ffserver -f  /etc/ffserver3.conf
  
  ffserver version 2.0 Copyright (c) 2000-2013 the FFmpeg developers
  
  built on Aug 19 2013 23:10:58 with gcc 4.7 (Debian 4.7.2-5)
  
  configuration: 
  
  libavutil      52. 38.100 / 52. 38.100
  
  libavcodec     55. 18.102 / 55. 18.102
  
  libavformat    55. 12.100 / 55. 12.100
  
  libavdevice    55.  3.100 / 55.  3.100
  
  libavfilter     3. 79.101 /  3. 79.101
  
  libswscale      2.  3.100 /  2.  3.100
  
  libswresample   0. 17.102 /  0. 17.102
  
  Mon Sep  9 12:08:19 2013 FFserver started.
  
  Mon Sep  9 12:08:40 2013 127.0.0.1 - - [POST] "/feed.ffm HTTP/1.1" 200 4096
  
  Mon Sep  9 12:12:28 2013 127.0.0.1 - - [GET] "/ HTTP/1.1" 200 1847

  So, what is the problem now ?