Recherche avancée

Sur d’autres sites (6679)

• Muxing together a .ts file and a sub file causes playback issues in video and audio [closed]

  3 mai 2024, par Meta83

  So I have a .ts file and a converted .dvb sub file (.SRT TO .DVB) that I want to mux togheter using FFMPEG. The mux is a success and the file plays fine in VLC or other modern divce.However I have an older divce (around 10 yeras old) where playback has issues, whenever a line of subs is displayd the picture and and audio gets corrupted and frezzes up and as sson there are no lins everything looks good again and so on. Note that subs are displayd correctly and they are not affected by the issue, only picture and audio is.

  


  I have tried using diffrent command without any luck but here is the most basic command that should work :

  


  ffmpeg -i <video file="file"> -i <dvb file="file"> -f mpegts -c:v copy -c:a copy -c:s copy -copyts <output file="file">&#xA;</output></dvb></video>

  


  Here is the output I get frome FFMPEG :

  


  ffmpeg version 7.0-full_build-www.gyan.dev Copyright (c) 2000-2024 the FFmpeg developers
  built with gcc 13.2.0 (Rev5, Built by MSYS2 project)
  configuration: --enable-gpl --enable-version3 --enable-static --disable-w32threads --disable-autodetect --enable-fontconfig --enable-iconv --enable-gnutls --enable-libxml2 --enable-gmp --enable-bzlib --enable-lzma --enable-libsnappy --enable-zlib --enable-librist --enable-libsrt --enable-libssh --enable-libzmq --enable-avisynth --enable-libbluray --enable-libcaca --enable-sdl2 --enable-libaribb24 --enable-libaribcaption --enable-libdav1d --enable-libdavs2 --enable-libuavs3d --enable-libxevd --enable-libzvbi --enable-librav1e --enable-libsvtav1 --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxavs2 --enable-libxeve --enable-libxvid --enable-libaom --enable-libjxl --enable-libopenjpeg --enable-libvpx --enable-mediafoundation --enable-libass --enable-frei0r --enable-libfreetype --enable-libfribidi --enable-libharfbuzz --enable-liblensfun --enable-libvidstab --enable-libvmaf --enable-libzimg --enable-amf --enable-cuda-llvm --enable-cuvid --enable-dxva2 --enable-d3d11va --enable-d3d12va --enable-ffnvcodec --enable-libvpl --enable-nvdec --enable-nvenc --enable-vaapi --enable-libshaderc --enable-vulkan --enable-libplacebo --enable-opencl --enable-libcdio --enable-libgme --enable-libmodplug --enable-libopenmpt --enable-libopencore-amrwb --enable-libmp3lame --enable-libshine --enable-libtheora --enable-libtwolame --enable-libvo-amrwbenc --enable-libcodec2 --enable-libilbc --enable-libgsm --enable-libopencore-amrnb --enable-libopus --enable-libspeex --enable-libvorbis --enable-ladspa --enable-libbs2b --enable-libflite --enable-libmysofa --enable-librubberband --enable-libsoxr --enable-chromaprint
  libavutil      59.  8.100 / 59.  8.100
  libavcodec     61.  3.100 / 61.  3.100
  libavformat    61.  1.100 / 61.  1.100
  libavdevice    61.  1.100 / 61.  1.100
  libavfilter    10.  1.100 / 10.  1.100
  libswscale      8.  1.100 /  8.  1.100
  libswresample   5.  1.100 /  5.  1.100
  libpostproc    58.  1.100 / 58.  1.100
[mpegts @ 0000029209341000] stream 0 : no PTS found at end of file, duration not set
Input #0, mpegts, from '\Tests\video.ts':
  Duration: 00:28:52.06, start: 0.980000, bitrate: 4992 kb/s
  Program 1
  Stream #0:0[0x1e1]: Video: h264 (Main) ([27][0][0][0] / 0x001B), yuv420p(tv, bt709, progressive), 1920x1080 [SAR 1:1 DAR 16:9], 25 fps, 25 tbr, 90k tbn
  Stream #0:1[0x1e2](swe): Audio: mp2 (mp3float) ([3][0][0][0] / 0x0003), 48000 Hz, stereo, fltp, 192 kb/s
Input #1, mpegts, from 'ENG.dvb':
  Duration: 00:28:09.88, start: 0.160000, bitrate: 8 kb/s
  Program 1
    Metadata:
      service_name    : Service01
      service_provider: FFmpeg
  Stream #1:0[0x100](eng): Subtitle: dvb_subtitle (dvbsub) ([6][0][0][0] / 0x0006)
Stream mapping:
  Stream #0:0 -> #0:0 (copy)
  Stream #0:1 -> #0:1 (copy)
  Stream #1:0 -> #0:2 (copy)
Output #0, mpegts, to '\Tests\20735799_muxed.ts':
  Metadata:
    encoder         : Lavf61.1.100
  Stream #0:0: Video: h264 (Main) ([27][0][0][0] / 0x001B), yuv420p(tv, bt709, progressive), 1920x1080 [SAR 1:1 DAR 16:9], q=2-31, 25 fps, 25 tbr, 90k tbn
  Stream #0:1(swe): Audio: mp2 ([3][0][0][0] / 0x0003), 48000 Hz, stereo, fltp, 192 kb/s
  Stream #0:2(swe): Subtitle: dvb_subtitle ([6][0][0][0] / 0x0006)
Press [q] to stop, [?] for help
[out#0/mpegts @ 000002920a155380] video:951379KiB audio:40595KiB subtitle:1389KiB other streams:0KiB global headers:0KiB muxing overhead: 3.385295%
size= 1026992KiB time=00:27:25.74 bitrate=5112.1kbits/s speed=75.3x


  


  Can anyone help me out ? I'm I missing something that is needed for older divaces (divece in question is a Samsung SMT-S5140 STB).

  


• FFmpeg -ss parameter is the video duration, Output file is empty

  16 avril 2024, par noun nil

  The main function is to obtain the corresponding video frame based on the input seconds.Before processing, the duration of the video will be obtained to determine whether the input is within the duration range of the video. If so, the corresponding instruction will be executed.

  


  > ffprobe input.mp4
  ...
  Duration: 00:00:28.05, start: 0.000000, bitrate: 1136 kb/s


  


  > ffmpeg -ss 00:00:28 -i input.mp4 -frames:v 1 output.png
 ffmpeg version 7.0 Copyright (c) 2000-2024 the FFmpeg developers
  built with Apple clang version 15.0.0 (clang-1500.3.9.4)
  configuration: --prefix=/opt/homebrew/Cellar/ffmpeg/7.0 --enable-shared --enable-pthreads --enable-version3 --cc=clang --host-cflags= --host-ldflags='-Wl,-ld_classic' --enable-ffplay --enable-gnutls --enable-gpl --enable-libaom --enable-libaribb24 --enable-libbluray --enable-libdav1d --enable-libharfbuzz --enable-libjxl --enable-libmp3lame --enable-libopus --enable-librav1e --enable-librist --enable-librubberband --enable-libsnappy --enable-libsrt --enable-libssh --enable-libsvtav1 --enable-libtesseract --enable-libtheora --enable-libvidstab --enable-libvmaf --enable-libvorbis --enable-libvpx --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxml2 --enable-libxvid --enable-lzma --enable-libfontconfig --enable-libfreetype --enable-frei0r --enable-libass --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-libopenvino --enable-libspeex --enable-libsoxr --enable-libzmq --enable-libzimg --disable-libjack --disable-indev=jack --enable-videotoolbox --enable-audiotoolbox --enable-neon
  libavutil      59.  8.100 / 59.  8.100
  libavcodec     61.  3.100 / 61.  3.100
  libavformat    61.  1.100 / 61.  1.100
  libavdevice    61.  1.100 / 61.  1.100
  libavfilter    10.  1.100 / 10.  1.100
  libswscale      8.  1.100 /  8.  1.100
  libswresample   5.  1.100 /  5.  1.100
  libpostproc    58.  1.100 / 58.  1.100
Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'input.mp4':
  Metadata:
    major_brand     : isom
    minor_version   : 512
    compatible_brands: isomiso2avc1mp41
    encoder         : Lavf58.29.100
    description     : Packed by Bilibili XCoder v2.0.2
  Duration: 00:00:28.05, start: 0.000000, bitrate: 1136 kb/s
  Stream #0:0[0x1](und): Video: h264 (High) (avc1 / 0x31637661), yuv420p(tv, bt709, progressive), 720x1280 [SAR 1:1 DAR 9:16], 1005 kb/s, 25.27 fps, 25.25 tbr, 16k tbn (default)
      Metadata:
        handler_name    : VideoHandler
        vendor_id       : [0][0][0][0]
  Stream #0:1[0x2](und): Audio: aac (LC) (mp4a / 0x6134706D), 44100 Hz, stereo, fltp, 128 kb/s (default)
      Metadata:
        handler_name    : SoundHandler
        vendor_id       : [0][0][0][0]
Stream mapping:
  Stream #0:0 -> #0:0 (h264 (native) -> png (native))
Press [q] to stop, [?] for help
[swscaler @ 0x1187a0000] [swscaler @ 0x110e48000] No accelerated colorspace conversion found from yuv420p to rgb24.
[swscaler @ 0x1187a0000] [swscaler @ 0x110e58000] No accelerated colorspace conversion found from yuv420p to rgb24.
[swscaler @ 0x1187a0000] [swscaler @ 0x110e68000] No accelerated colorspace conversion found from yuv420p to rgb24.
[swscaler @ 0x1187a0000] [swscaler @ 0x110e78000] No accelerated colorspace conversion found from yuv420p to rgb24.
[swscaler @ 0x1187a0000] [swscaler @ 0x110e88000] No accelerated colorspace conversion found from yuv420p to rgb24.
[swscaler @ 0x1187a0000] [swscaler @ 0x110e98000] No accelerated colorspace conversion found from yuv420p to rgb24.
[swscaler @ 0x1187a0000] [swscaler @ 0x110ea8000] No accelerated colorspace conversion found from yuv420p to rgb24.
[swscaler @ 0x1187a0000] [swscaler @ 0x110eb8000] No accelerated colorspace conversion found from yuv420p to rgb24.
[swscaler @ 0x1187a0000] [swscaler @ 0x110ec8000] No accelerated colorspace conversion found from yuv420p to rgb24.
[vost#0:0/png @ 0x12ce06840] No filtered frames for output stream, trying to initialize anyway.
Output #0, image2, to 'output.png':
  Metadata:
    major_brand     : isom
    minor_version   : 512
    compatible_brands: isomiso2avc1mp41
    description     : Packed by Bilibili XCoder v2.0.2
    encoder         : Lavf61.1.100
  Stream #0:0(und): Video: png, rgb24(progressive), 720x1280 [SAR 1:1 DAR 9:16], q=2-31, 200 kb/s, 25.25 fps, 16k tbn (default)
      Metadata:
        handler_name    : VideoHandler
        vendor_id       : [0][0][0][0]
        encoder         : Lavc61.3.100 png
[out#0/image2 @ 0x600000e983c0] video:0KiB audio:0KiB subtitle:0KiB other streams:0KiB global headers:0KiB muxing overhead: unknown
[out#0/image2 @ 0x600000e983c0] Output file is empty, nothing was encoded(check -ss / -t / -frames parameters if used)
frame=    0 fps=0.0 q=0.0 Lsize=N/A time=N/A bitrate=N/A speed=N/A    



  


  -ss 00:00:28 within the video duration range, but still cannot obtain frames...

  


  -ss 00:00:27 Can obtain video frames

  


• Multi-Site Management (Quick-Start Guide)

  18 juillet 2024, par Erin

  Do you run multiple websites ?

  Or, you’re expanding from one to two sites ?

  Multi-site management isn’t an easy task.

  While there are dozens of reasons why you may need to operate several sites, like brick and mortar stores opening new locations in different regions, you need to ensure you’re following the right strategies so you remain successful.

  So, how do you actually manage multiple websites at the same time without spreading yourself thin ?

  Using a single dashboard.

  In this guide, we’ll cover everything you need to know about managing multiple sites in a single location at once so you can lead a successful digital strategy.

  What is multi-site management ?

  Multi-site management is the process of organising and operating multiple websites from a single location. It helps with congruent branding and improved productivity.

  Enterprise businesses that use multiple, language-specific versions of their site to target their audience in specific countries or regions can also benefit from managing their multiple sites from a single location. 

  

  By analysing a few websites at once, marketers and analysts can oversee a few different business websites without having to switch between multiple platforms and technologies.

  Whatever the reason is for managing multiple sites, multi-site management helps marketers and analysts establish a consistent brand presence, improve workflow efficiencies and scale operations.

  7 Benefits of multi-site management

  Multi-site management allows you to navigate and control a few websites all in one centralised location.

  

  Here are a few of the main benefits of multi-site management :

  1. Save time by reusing code between websites

  Saving time is the main benefit of multi-site management. Rather than managing websites from multiple platforms, logins and infrastructures, you can manage everything from one place.

  Multi-site management allows you to easily reuse core code, infrastructure and other digital assets from other sites all within one dashboard.

  So, when you need to update all of your websites, you can do it all at once in a fraction of the time.

  2. Improve productivity by having everything in one place

  How many tools do you currently use for your job on a daily basis ?

  Five ? Ten ?

  Now, imagine adding on another handful of tools, logins and technology for every site you manage.

  It’s a lot, especially if you’re managing dozens of logins, usernames and passwords.

  With multi-site management, you don’t need to have multiple login credentials. Everything’s all in one place and within one system.

  You don’t need to switch between multiple tools and platforms to get things done.

  The same strategy applies to your web analytics. If you want to streamline your productivity, make sure you’re tracking all of the data from your different websites in one place. Matomo lets you track multiple sites, domains and subdomains in one centralised location with the ‘All Websites’ dashboard which is a roll-up report. This is ideal for enterprises managing and analysing numerous sites.

  Try Matomo for Free

  Get the web insights you need, without compromising data accuracy.

  Start for free

  No credit card required

  3. Maintain brand image with consistent design across sites

  If you have multiple websites, subsidiaries or sister companies, it can take a great deal of effort to maintain branding consistency.

  But, if you’re leveraging a multi-site content management system, you can update your branding and design between all sites at the same time.

  If you need to make a change with your design, you don’t need to update each individual site with your new initiative. Instead, you can update multiple sites at once, allowing your visual branding to stay congruent, giving you uniformity in messaging.

  The result is an optimised user experience, which helps you increase trust with your audience, improve engagement and keep them coming back for years to come.

  4. Increase security through centralised management

  The greater your digital presence is, the more you can reach a wider range of people.

  But, there’s one downside : you expose yourself to more risk.

  Keeping multiple websites secure isn’t as easy to do if you’re leveraging dozens of different platforms and logins. 

  Instead, when you have all of your websites in one location, it can help you easily track every document. You can also control site versions for easy updates to prevent malicious attacks.

  5. Optimise scalability and flexibility

  If you plan on scaling your companies and digital presence, you need to ensure you’re able to do so without having to tear down your entire infrastructure or spend a ton of money upfront.

  For enterprise companies, multi-site management allows you to easily launch new regional sites as your company expands.

  Plus, if you have new product or marketing campaigns, you can simply add on microsites as needed by simply adding it to your current website lineup.

  This allows you to stay flexible in your marketing and growth strategies without adding extra risk or financial burden.

  6. Improve targeting and personalisation in marketing

  If you want to reach your audience better, but you’re managing multiple websites, it can be hard to not spread yourself too thin.

  But, if you’re managing a few websites in one place, it’s easier to track your audience’s interests, behaviour, wants and needs.

  By using a web analytics tool like Matomo to track the performance of multiple websites, you can see what’s resonating with your audience so you’re able to improve your targeting and offer personalised campaigns.

  Try Matomo for Free

  Get the web insights you need, without compromising data accuracy.

  Start for free

  No credit card required

  7. Streamline collaboration between team members

  Making your team juggle multiple platforms, websites and tools is a surefire way to give them a headache.

  Multi-site management is one of the best ways to bring your entire team into one centralised location so you can foster seamless collaboration without leaving your team confused or frustrated.

  By placing your entire website management in one place, markters, designers, developers, writers and other team members can collaborate effectively so you can get more done in less time.

  With multi-site management, you bring your entire team into a single location to work on your websites so you can speed up your content creation process, speed up problem solving and streamline communication.

  6 Best practices of multi-site management

  When you have multiple websites, you can expand your brand presence. But, one main problem arises : it becomes overwhelming for anyone managing them.

  Since each website comes with its own platform, login credentials and assets, it becomes incredibly difficult for developers, marketers and others to maintain the sites. And, if your sites aren’t looked after properly, you could end up with technical issues and branding inconsistencies, causing you to lose conversions and negatively impact the user experience.

  Thankfully, multi-site management can help you streamline your efforts, improve productivity and scale your business.

  But, before you dive into your multi-site management process, you need to ensure you implement the right strategy.

  

  Here are a few best practices to follow to succeed with multi-site management :

  1. Use a multi-site CMS

  If you want to manage multiple websites, you need to make sure you’re leveraging a CMS that offers multi-site management capabilities.

  A multi-site CMS allows you to make simple content, design or management changes simultaneously without having to switch between different systems.

  Here are a few examples of CMS’ that offer multi-site management :

  • WordPress
  • Sanity
  • Drupal

  2. Integrate a headless CMS

  One of the most versatile types of content management systems is what’s known as a “headless CMS.”

  This is a CMS that lets you disconnect the front end from the back end of your website management.

  Here are a few examples of headless (and open source) CMS’ :

  • Strapi
  • Directus
  • Ghost

  A headless CMS can help you add versatility in the way you present content across multiple sites. It uses an API to give you more flexibility so you can push content to websites as well as apps, etc.

  Using a headless CMS can help you improve page load times, website performance and user experience by simplifying your tech stack.

  3. Implement cross-domain and mult-isite Matomo analytics tracking

  If you want to track the website analytics data of multiple sites, you need to implement cross-domain tracking.

  The best way to do this is by leveraging a web analytics solution like Matomo. It lets you track the performance of multiple subdomains or websites.

  With Matomo, you get easy data grouping and data roll-up reporting for streamlined tracking.

  

  This means you can track the individual performance of each site or group them together to see the shared performance.

  4. Enable multiuser management

  If you’re working with different team members who need access to your CMS, then you should consider enabling multiuser management.

  This allows several people to work within your multi-site CMS and also gives you the ability to grant or restrict access to certain abilities within the platform.

  This is handy if you have a few different stakeholders working in your CMS.

  By enabling different user permissions and access, you can improve the security of your website and protect sensitive company information.

  5. Leverage composable content

  Creating a few different websites is a great way to increase your brand reach. But, it can be time-consuming having to continuously create and update content within multiple sites.

  That’s where composable content comes in.

  It allows you to create similar content between sites using pre-made “blocks.” Content blocks act as templates so you can quickly add similar content pieces to each site without having to start over from scratch each time.

  This speeds up productivity for your designers, writers and editors and keeps brand image consistent across different sites.

  6. Use version control

  What happens if you update all of your websites with a redesign, but it flops ?

  Well, rather than having to tear it all down and redesign your site infrastructure, you can leverage version control to restore your website to a previous version.

  Version control is especially handy when you’re managing multiple sites at once and you have multiple team members working in your CMS.

  Version control is also helpful if you’re A/B testing different content. By saving previous versions of your websites, you can run tests to help you optimise your web performance. 

  For example, if you use Matomo’s A/B testing feature to experiment with different landing page designs for a lead magnet, but find that your previous version performed better, you can simply restore your websites to a previous version in seconds.

  Track web analytics for multiple websites with Matomo

  If you’re looking to expand your digital presence, then creating new websites is one of the best ways to grow your brand.

  Multi-site management can help you save time, improve productivity and maintain a consistent brand image across your empire.

  One challenge of multi-site management is tracking the performance of your websites.

  That’s where Matomo has you covered.

  Matomo is a privacy-friendly web analytics tool that collects, stores, and tracks data across multiple websites and subdomains, allowing you to improve your performance. 

  With over 1 million websites using Matomo, you can rely on it for accurate data without sampling, ensuring compliance with privacy regulations like GDPR and CCPA. 

  Matomo is especially beneficial for enterprises. It offers advanced roll-up reporting, enabling you to see the performance of multiple websites in one centralised dashboard. This feature, along with heatmaps, session recordings, and A/B testing, provides deeper insights into your website performance.

  Discover how Matomo can transform your web analytics with a demo. Request your demo now.

  Try Matomo for Free

  21 day free trial. No credit card required.

  
  

  Your email address
  

  Your website address
  

  Your Analytics subdomain will be .matomo.cloud (change)

  Choose your analytics subdomain
  

  .matomo.cloud

  I accept the terms and conditions and data processing agreement (DPA)

  
  Your information will be used to create an account on our cloud service. For more information please consult our privacy policy.
  
  
  

  Start improving your websites now