Recherche avancée

Sur d’autres sites (7356)

• FFMPEG Audio/video out of sync after cutting and concatonating even after transcoding

  4 mai 2020, par Ham789

  I am attempting to take cuts from a set of videos and concatonate them together with the concat demuxer.

  



  However, the audio is out of sync of the video in the output. The audio seems to drift further out of sync as the video progresses. Interestingly, if I click to seek another time in the video with the progress bar on the player, the audio becomes synced up with the video but then gradually drifts out of sync again. Seeking to a new time in the player seems to reset the audio/video. It is like they are being played back at different rates or something. I get this behaviour in both Quicktime and VLC players.

  



  For each video, I decode it, trim a clip from it and then encode it to 4k resolution at 25 fps with its audio :

  



  ffmpeg -ss 0.5 -t 0.5 -i input_video1.mp4 -r 25 -vf scale=3840:2160 output_video1.mp4

  



  I then take each of these videos and concatonate them together with the concat demuxer :

  



  ffmpeg -f concat -safe 0 -i cut_videos.txt -c copy -y output.mp4

  



  I am taking short cuts of each video (approximately 0.5s)

  



  I am using Python's subprocess to automate the cutting and concatonating of the videos.

  



  I am not sure if this happens because of the trimming or concatenation steps but when I play back the intermediate cut video files (output_video1.mp4 in the above command), there seems to be some silence before the audio comes in at the start of the video.

  



  When I concatonate the videos, I sometimes get a lot of these warnings however the audio still becomes out of sync even when I do not get them :

  



  [mp4 @ 0000021a252ce080] Non-monotonous DTS in output stream 0:1; previous: 51792, current: 50009; changing to 51793. This may result in incorrect timestamps in the output file.

  



  From this post, it seems to be a problem with cutting the videos and their timestamps. The solution proposed in the post is to decode, cut and then encode the video however I am already doing that.

  



  How can I ensure the audio and video are in sync ? Am I transcoding incorrectly ? This seems to be the only solution I can find online however it does not seem to work.

  



  UPDATE :

  



  I took inspiration from this post and seperated the audio and video from output_video1.mp4 using :

  



  ffmpeg -i output_video1.mp4 -acodec copy -vn video.mp4

  



  and

  



  ffmpeg -i output_video1.mp4 -vcodec copy -an audio.mp4

  



  I then compared the durations of video.mp4 and audio.mp4 and got 0.57s and 0.52s respectively. Since the video is longer, this explains why there is a period of silence in the videos. The post then suggests transcoding is the solution however as you can see from the code above that does not work for me.

  



  Sample Output Log for the Trim Command

  



    built with Apple LLVM version 10.0.0 (clang-1000.11.45.5)
  configuration: --prefix=/usr/local/Cellar/ffmpeg/4.2.2 --enable-shared --enable-pthreads --enable-version3 --enable-avresample --cc=clang --host-cflags='-I/Library/Java/JavaVirtualMachines/adoptopenjdk-13.0.1.jdk/Contents/Home/include -I/Library/Java/JavaVirtualMachines/adoptopenjdk-13.0.1.jdk/Contents/Home/include/darwin' --host-ldflags= --enable-ffplay --enable-gnutls --enable-gpl --enable-libaom --enable-libbluray --enable-libmp3lame --enable-libopus --enable-librubberband --enable-libsnappy --enable-libtesseract --enable-libtheora --enable-libvidstab --enable-libvorbis --enable-libvpx --enable-libx264 --enable-libx265 --enable-libxvid --enable-lzma --enable-libfontconfig --enable-libfreetype --enable-frei0r --enable-libass --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-librtmp --enable-libspeex --enable-libsoxr --enable-videotoolbox --disable-libjack --disable-indev=jack
  libavutil      56. 31.100 / 56. 31.100
  libavcodec     58. 54.100 / 58. 54.100
  libavformat    58. 29.100 / 58. 29.100
  libavdevice    58.  8.100 / 58.  8.100
  libavfilter     7. 57.100 /  7. 57.100
  libavresample   4.  0.  0 /  4.  0.  0
  libswscale      5.  5.100 /  5.  5.100
  libswresample   3.  5.100 /  3.  5.100
  libpostproc    55.  5.100 / 55.  5.100
Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'input_video1.mp4':
  Metadata:
    major_brand     : isom
    minor_version   : 512
    compatible_brands: isomiso2avc1mp41
    encoder         : Lavf58.29.100
  Duration: 00:00:04.06, start: 0.000000, bitrate: 14266 kb/s
    Stream #0:0(und): Video: h264 (High) (avc1 / 0x31637661), yuv420p, 3840x2160, 14268 kb/s, 30 fps, 30 tbr, 15360 tbn, 60 tbc (default)
    Metadata:
      handler_name    : Core Media Video
    Stream #0:1(und): Audio: aac (LC) (mp4a / 0x6134706D), 44100 Hz, mono, fltp, 94 kb/s (default)
    Metadata:
      handler_name    : Core Media Audio
File 'output_video1.mp4' already exists. Overwrite ? [y/N] y
Stream mapping:
  Stream #0:0 -> #0:0 (h264 (native) -> h264 (libx264))
  Stream #0:1 -> #0:1 (aac (native) -> aac (native))
Press [q] to stop, [?] for help
[libx264 @ 0x7fcae4001e00] using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2 AVX FMA3 BMI2 AVX2
[libx264 @ 0x7fcae4001e00] profile High, level 5.1
[libx264 @ 0x7fcae4001e00] 264 - core 155 r2917 0a84d98 - H.264/MPEG-4 AVC codec - Copyleft 2003-2018 - http://www.videolan.org/x264.html - options: cabac=1 ref=3 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=7 psy=1 psy_rd=1.00:0.00 mixed_ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=-2 threads=12 lookahead_threads=2 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2 b_adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=25 scenecut=40 intra_refresh=0 rc_lookahead=40 rc=crf mbtree=1 crf=23.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00
Output #0, mp4, to 'output_video1.mp4':
  Metadata:
    major_brand     : isom
    minor_version   : 512
    compatible_brands: isomiso2avc1mp41
    encoder         : Lavf58.29.100
    Stream #0:0(und): Video: h264 (libx264) (avc1 / 0x31637661), yuv420p, 3840x2160, q=-1--1, 25 fps, 12800 tbn, 25 tbc (default)
    Metadata:
      handler_name    : Core Media Video
      encoder         : Lavc58.54.100 libx264
    Side data:
      cpb: bitrate max/min/avg: 0/0/0 buffer size: 0 vbv_delay: -1
    Stream #0:1(und): Audio: aac (LC) (mp4a / 0x6134706D), 44100 Hz, mono, fltp, 69 kb/s (default)
    Metadata:
      handler_name    : Core Media Audio
      encoder         : Lavc58.54.100 aac
frame=   14 fps=7.0 q=-1.0 Lsize=     928kB time=00:00:00.51 bitrate=14884.2kbits/s dup=0 drop=1 speed=0.255x    
video:922kB audio:5kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: 0.194501%
[libx264 @ 0x7fcae4001e00] frame I:1     Avg QP:21.06  size:228519
[libx264 @ 0x7fcae4001e00] frame P:4     Avg QP:22.03  size: 85228
[libx264 @ 0x7fcae4001e00] frame B:9     Avg QP:22.88  size: 41537
[libx264 @ 0x7fcae4001e00] consecutive B-frames: 14.3%  0.0%  0.0% 85.7%
[libx264 @ 0x7fcae4001e00] mb I  I16..4: 27.6% 64.3%  8.1%
[libx264 @ 0x7fcae4001e00] mb P  I16..4:  9.1% 10.7%  0.2%  P16..4: 48.5%  7.3%  3.9%  0.0%  0.0%    skip:20.2%
[libx264 @ 0x7fcae4001e00] mb B  I16..4:  1.1%  1.0%  0.0%  B16..8: 44.5%  2.9%  0.2%  direct: 8.3%  skip:42.0%  L0:45.6% L1:53.2% BI: 1.2%
[libx264 @ 0x7fcae4001e00] 8x8 transform intra:58.2% inter:93.4%
[libx264 @ 0x7fcae4001e00] coded y,uvDC,uvAC intra: 31.4% 62.2% 5.2% inter: 11.4% 30.9% 0.0%
[libx264 @ 0x7fcae4001e00] i16 v,h,dc,p: 15% 52% 12% 21%
[libx264 @ 0x7fcae4001e00] i8 v,h,dc,ddl,ddr,vr,hd,vl,hu: 19% 33% 32%  2%  2%  2%  4%  2%  4%
[libx264 @ 0x7fcae4001e00] i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 20% 39%  9%  3%  4%  4% 12%  3%  4%
[libx264 @ 0x7fcae4001e00] i8c dc,h,v,p: 43% 36% 18%  3%
[libx264 @ 0x7fcae4001e00] Weighted P-Frames: Y:0.0% UV:0.0%
[libx264 @ 0x7fcae4001e00] ref P L0: 69.3%  8.0% 14.8%  7.9%
[libx264 @ 0x7fcae4001e00] ref B L0: 88.1%  9.2%  2.6%
[libx264 @ 0x7fcae4001e00] ref B L1: 90.2%  9.8%
[libx264 @ 0x7fcae4001e00] kb/s:13475.29
[aac @ 0x7fcae4012400] Qavg: 125.000```


  


• Statically built FFMPEG binary segmentation fault

  12 février 2020, par stevendesu

  I want to create a custom build of FFMPEG which rips out everything except for the ability to transmux HLS videos to MP4, and I need this build to be 100% static with no external dependencies

  I tried using the following configuration :

  ./configure \
  
      --extra-cflags='-static -static-libstdc++ -static-libgcc' \
  
      --extra-cxxflags='-static -static-libstdc++ -static-libgcc' \
  
      --extra-ldflags='-static -static-libstdc++ -static-libgcc' \
  
      --pkg-config-flags='--static' \
  
      --enable-static \
  
      --disable-shared \
  
      --disable-runtime-cpudetect \
  
      --disable-autodetect \
  
      --disable-ffplay \
  
      --disable-ffprobe \
  
      --disable-doc \
  
      --disable-avdevice \
  
      --disable-swresample \
  
      --disable-swscale \
  
      --disable-postproc \
  
      --disable-pthreads \
  
      --disable-w32threads \
  
      --disable-os2threads \
  
      --enable-network \
  
      --disable-dct \
  
      --disable-dwt \
  
      --disable-error-resilience \
  
      --disable-lsp \
  
      --disable-lzo \
  
      --disable-mdct \
  
      --disable-rdft \
  
      --disable-fft \
  
      --disable-faan \
  
      --disable-pixelutils \
  
      --disable-encoders \
  
      --disable-decoders \
  
      --disable-hwaccels \
  
      --disable-muxers \
  
      --enable-muxer=mov \
  
      --enable-muxer=mp4 \
  
      --disable-demuxers \
  
      --enable-demuxer=hls \
  
      --enable-demuxer=mpegts \
  
      --enable-demuxer=h264 \
  
      --enable-demuxer=aac \
  
      --disable-parsers \
  
      --enable-parser=h264 \
  
      --enable-parser=aac \
  
      --disable-bsfs \
  
      --disable-protocols \
  
      --enable-protocol=tcp \
  
      --enable-protocol=tls \
  
      --enable-protocol=http \
  
      --enable-protocol=https \
  
      --enable-protocol=hls \
  
      --disable-indevs \
  
      --disable-outdevs \
  
      --disable-devices \
  
      --disable-filters \
  
      --disable-alsa \
  
      --disable-appkit \
  
      --disable-avfoundation \
  
      --disable-bzlib \
  
      --disable-coreimage \
  
      --disable-iconv \
  
      --disable-lzma \
  
      --enable-openssl \
  
      --disable-sndio \
  
      --disable-sdl2 \
  
      --disable-securetransport \
  
      --disable-xlib \
  
      --disable-zlib \
  
      --disable-amf \
  
      --disable-audiotoolbox \
  
      --disable-cuda-llvm \
  
      --disable-cuvid \
  
      --disable-d3d11va \
  
      --disable-dxva2 \
  
      --disable-ffnvcodec \
  
      --disable-nvdec \
  
      --disable-nvenc \
  
      --disable-v4l2-m2m \
  
      --disable-vaapi \
  
      --disable-vdpau \
  
      --disable-videotoolbox \
  
      --disable-debug

  This looked about like what I wanted :

  install prefix            /usr/local
  
  source path               .
  
  C compiler                gcc
  
  C library                 glibc
  
  ARCH                      x86 (generic)
  
  big-endian                no
  
  runtime cpu detection     no
  
  standalone assembly       yes
  
  x86 assembler             nasm
  
  MMX enabled               yes
  
  MMXEXT enabled            yes
  
  3DNow! enabled            yes
  
  3DNow! extended enabled   yes
  
  SSE enabled               yes
  
  SSSE3 enabled             yes
  
  AESNI enabled             yes
  
  AVX enabled               yes
  
  AVX2 enabled              yes
  
  AVX-512 enabled           yes
  
  XOP enabled               yes
  
  FMA3 enabled              yes
  
  FMA4 enabled              yes
  
  i686 features enabled     yes
  
  CMOV is fast              yes
  
  EBX available             yes
  
  EBP available             yes
  
  debug symbols             no
  
  strip symbols             yes
  
  optimize for size         no
  
  optimizations             yes
  
  static                    yes
  
  shared                    no
  
  postprocessing support    no
  
  network support           yes
  
  threading support         no
  
  safe bitstream reader     yes
  
  texi2html enabled         no
  
  perl enabled              yes
  
  pod2man enabled           yes
  
  makeinfo enabled          no
  
  makeinfo supports HTML    no
  
  
  
  External libraries:
  
  openssl
  
  
  
  External libraries providing hardware acceleration:
  
  
  
  Libraries:
  
  avcodec                 avfilter                avformat                avutil
  
  
  
  Programs:
  
  ffmpeg
  
  
  
  Enabled decoders:
  
  
  
  Enabled encoders:
  
  
  
  Enabled hwaccels:
  
  
  
  Enabled parsers:
  
  aac                     h264
  
  
  
  Enabled demuxers:
  
  aac                     h264                    hls                     mpegts
  
  
  
  Enabled muxers:
  
  mov                     mp4
  
  
  
  Enabled protocols:
  
  hls                     http                    https                   tcp                     tls
  
  
  
  Enabled filters:
  
  aformat                 anull                   atrim                   format                  hflip                   null                    transpose               trim                    vflip
  
  
  
  Enabled bsfs:
  
  null
  
  
  
  Enabled indevs:
  
  
  
  Enabled outdevs:
  
  
  
  License: LGPL version 2.1 or later

  It included several filters which I won’t ever need or use, but these filters are pulled in automatically if you don’t specify --disable-avfilter, and specifying --disable-avfilter prevents the ffmpeg binary from being produced. So I’m stuck with those.

  Using these parameters and then running make, I received a binary that was about 5.9 MB in size and looked right :

  $> ldd ffmpeg
  
          not a dynamic executable

  But when I try to run it :

  $> ./ffmpeg -version
  
  Segmentation fault

  Using valgrind to try and inspect the cause of the segmentation fault :

  $> valgrind ./ffmpeg -version
  
  .... lots of stuff ...
  
  ==61362== Jump to the invalid address stated on the next line
  
  ==61362==    at 0x0: ???
  
  ==61362==    by 0x70BB1B: ??? (in /src/FFmpeg/ffmpeg)
  
  ==61362==    by 0x70B2E6: ??? (in /src/FFmpeg/ffmpeg)
  
  ==61362==    by 0x4033F9: ??? (in /src/FFmpeg/ffmpeg)
  
  ==61362==    by 0x1FFF000677: ???
  
  ==61362==  Address 0x0 is not stack'd, malloc'd or (recently) free'd
  
  ==61362==
  
  ==61362==
  
  ==61362== Process terminating with default action of signal 11 (SIGSEGV)
  
  ==61362==  Bad permissions for mapped region at address 0x0
  
  ==61362==    at 0x0: ???
  
  ==61362==    by 0x70BB1B: ??? (in /src/FFmpeg/ffmpeg)
  
  ==61362==    by 0x70B2E6: ??? (in /src/FFmpeg/ffmpeg)
  
  ==61362==    by 0x4033F9: ??? (in /src/FFmpeg/ffmpeg)
  
  ==61362==    by 0x1FFF000677: ???
  
  ==61362==
  
  ==61362== HEAP SUMMARY:
  
  ==61362==     in use at exit: 0 bytes in 0 blocks
  
  ==61362==   total heap usage: 0 allocs, 0 frees, 0 bytes allocated
  
  ==61362==
  
  ==61362== All heap blocks were freed -- no leaks are possible
  
  ==61362==
  
  ==61362== For counts of detected and suppressed errors, rerun with: -v
  
  ==61362== Use --track-origins=yes to see where uninitialised values come from
  
  ==61362== ERROR SUMMARY: 93 errors from 90 contexts (suppressed: 0 from 0)
  
  Segmentation fault

  Attempting to access memory at location 0x0 sounds like trying to follow a null pointer. But I’m not sure how to fix this.

  gdb backtrace

  When I first ran gdb ./ffmpeg gdb immediately gave me a segmentation fault and I wasn’t kicked into the gdb REPL, so I couldn’t investigate

  After rebuilding ffmpeg I was able to get in this time :

  $> gdb ./ffmpeg
  
  
  
  GNU gdb (Ubuntu 8.1-0ubuntu3.2) 8.1.0.20180409-git
  
  Copyright (C) 2018 Free Software Foundation, Inc.
  
  License GPLv3+: GNU GPL version 3 or later /gnu.org/licenses/gpl.html>
  
  This is free software: you are free to change and redistribute it.
  
  There is NO WARRANTY, to the extent permitted by law.  Type "show copying"
  
  and "show warranty" for details.
  
  This GDB was configured as "x86_64-linux-gnu".
  
  Type "show configuration" for configuration details.
  
  For bug reporting instructions, please see:
  
  /www.gnu.org/software/gdb/bugs/>.
  
  Find the GDB manual and other documentation resources online at:
  
  /www.gnu.org/software/gdb/documentation/>.
  
  For help, type "help".
  
  Type "apropos word" to search for commands related to "word"...
  
  Reading symbols from ffmpeg...done.
  
  (gdb) r
  
  Starting program: /src/FFmpeg/ffmpeg
  
  warning: Error disabling address space randomization: Operation not permitted
  
  
  
  Program received signal SIGSEGV, Segmentation fault.
  
  0x0000000000000000 in ?? ()
  
  (gdb) bt
  
  #0  0x0000000000000000 in ?? ()
  
  #1  0x0000000000f9a8d5 in __register_frame_info_bases.part.6 ()
  
  #2  0x00000000004445fd in frame_dummy ()
  
  #3  0x0000000000000001 in ?? ()
  
  #4  0x0000000000ebd20c in __libc_csu_init ()
  
  #5  0x0000000000ebc9d7 in __libc_start_main ()
  
  #6  0x000000000044451a in _start ()
  
  (gdb)

  I tried grep’ing the code base for __register_frame_info_bases and found nothing. So I’m not really sure where to go from here

  A fix, but not an explanation

  By randomly removing configuration parameters and rebuilding I discovered that --disable-pthreads was causing the segmentation fault. When I remove this, ffmpeg runs just fine

  I don’t know why this is the case, though. Why would they make it possible to remove something that you need to run ?

• FFmpeg seeking (-ss) not working on some devices

  4 juin 2020, par ClassA

  As the title states, -ss command is not working on some devices, like the Huawei Mate 10.

  



  Here is the command I'm using and how I get the values :

  



  Format formatter = new SimpleDateFormat("00:" + "mm:ss.SS");
// Video duration
long duration = getDuration();
// Video duration devided by 6 (I want to get 5 images)
long img1 = duration / 6;
String firstThumbTime = formatter.format(img1);
// Screen dimentions devided by 7
String dimentions = width + ":" + height;

String[] a = {"-ss", firstThumbTime, "-i", mStringFilePath, "-vframes", "1", "-s", dimentions, imageThumbsDirectory + "/" + "thumb1.bmp"};


  



  The command above looks like this :

  



  -ss 00:00:00.47 -i /storage/emulated/0/Android/data/com.my.package/files/MyVideos/2020_02_19_16_00_20.mp4 -vframes 1 -s 154:274 /storage/emulated/0/Android/data/com.my.package/files/ThumbTemp/thumb1.bmp


  



  The strange thing is that it completes without an error, but the output file is unreadable.

  



  I do not have the logs currently, but I have a user that can send it to me if you need it.

  



  ---

  



  I'm 100% sure that it is caused by -ss because I use a similar command for trimming a video elsewhere in my application and when the user exports the video without setting trimming points(-ss), then the video works.

  



  Here is the 2 command I use for trimming a video :

  



  Working :

  



  String[] s = {"-i", videonInputPath, "-crf", "18", "-c:v", "libx264", "-preset", "ultrafast", videoOutputPath};


  



  Not working

  



  String[] s = {"-ss", startValue, "-i", videonInputPath, "-crf", "18", "-c:v", "libx264", "-preset", "ultrafast", videoOutputPath};


  



  ---

  



  This is the first time a user sends me this issue, so it has to be something with his device.

  



  Any advice would greatly be appreciated.

  



  ---

  



  EDIT :

  



  Log as requested by @Gyan in the comment section below (Added -v 48 to command) :

  



  ffmpeg version n4.0-39-gda39990 Copyright (c) 2000-2018 the FFmpeg developers
built with gcc 4.9.x (GCC) 20150123 (prerelease)
configuration: --target-os=linux --cross-prefix=/root/bravobit/ffmpeg-android/toolchain-android/bin/arm-linux-androideabi- --arch=arm --cpu=cortex-a8 --enable-runtime-cpudetect --sysroot=/root/bravobit/ffmpeg-android/toolchain-android/sysroot --enable-pic --enable-libx264 --enable-ffprobe --enable-libopus --enable-libvorbis --enable-libfdk-aac --enable-libfreetype --enable-libfribidi --enable-libmp3lame --enable-fontconfig --enable-libvpx --enable-libass --enable-yasm --enable-pthreads --disable-debug --enable-version3 --enable-hardcoded-tables --disable-ffplay --disable-linux-perf --disable-doc --disable-shared --enable-static --enable-runtime-cpudetect --enable-nonfree --enable-network --enable-avresample --enable-avformat --enable-avcodec --enable-indev=lavfi --enable-hwaccels --enable-ffmpeg --enable-zlib --enable-gpl --enable-small --enable-nonfree --pkg-config=pkg-config --pkg-config-flags=--static --prefix=/root/bravobit/ffmpeg-android/build/armeabi-v7a --extra-cflags='-I/root/bravobit/ffmpeg-android/toolchain-android/include -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 -fno-strict-overflow -fstack-protector-all' --extra-ldflags='-L/root/bravobit/ffmpeg-android/toolchain-android/lib -Wl,-z,relro -Wl,-z,now -pie' --extra-cxxflags=
libavutil 56. 14.100 / 56. 14.100
libavcodec 58. 18.100 / 58. 18.100
libavformat 58. 12.100 / 58. 12.100
libavdevice 58. 3.100 / 58. 3.100
libavfilter 7. 16.100 / 7. 16.100
libavresample 4. 0. 0 / 4. 0. 0
libswscale 5. 1.100 / 5. 1.100
libswresample 3. 1.100 / 3. 1.100
libpostproc 55. 1.100 / 55. 1.100
Splitting the commandline.
Reading option '-ss' ... matched as option 'ss' (set the start time offset) with argument '00:30:02.58'.
Reading option '-i' ... matched as input url with argument '/storage/emulated/0/Download/email/VID-20180720-WA0001.mp4'.
Reading option '-v' ... matched as option 'v' (set logging level) with argument '48'.
Reading option '-vframes' ... matched as option 'vframes' (set the number of video frames to output) with argument '1'.
Reading option '-s' ... matched as option 's' (set frame size (WxH or abbreviation)) with argument '154:308'.
Reading option '/storage/emulated/0/Android/data/com.my.package/files/ThumbTemp/thumb1.bmp' ... matched as output url.
Finished splitting the commandline.
Parsing a group of options: global .
Applying option v (set logging level) with argument 48.
Successfully parsed a group of options.
Parsing a group of options: input url /storage/emulated/0/Download/email/VID-20180720-WA0001.mp4.
Applying option ss (set the start time offset) with argument 00:30:02.58.
Successfully parsed a group of options.
Opening an input file: /storage/emulated/0/Download/email/VID-20180720-WA0001.mp4.
[NULL @ 0xf1fa5000] Opening '/storage/emulated/0/Download/email/VID-20180720-WA0001.mp4' for reading
[file @ 0xf1f94000] Setting default whitelist 'file,crypto'
[mov,mp4,m4a,3gp,3g2,mj2 @ 0xf1fa5000] Format mov,mp4,m4a,3gp,3g2,mj2 probed with size=2048 and score=100
[mov,mp4,m4a,3gp,3g2,mj2 @ 0xf1fa5000] ISO: File Type Major Brand: mp42
[mov,mp4,m4a,3gp,3g2,mj2 @ 0xf1fa5000] Unknown dref type 0x206c7275 size 12
Last message repeated 1 times
[mov,mp4,m4a,3gp,3g2,mj2 @ 0xf1fa5000] rfps: 29.833333 0.018442
[mov,mp4,m4a,3gp,3g2,mj2 @ 0xf1fa5000] rfps: 29.916667 0.003419
Last message repeated 1 times
[mov,mp4,m4a,3gp,3g2,mj2 @ 0xf1fa5000] rfps: 30.000000 0.000764
Last message repeated 1 times
[mov,mp4,m4a,3gp,3g2,mj2 @ 0xf1fa5000] rfps: 60.000000 0.003057
Last message repeated 1 times
[mov,mp4,m4a,3gp,3g2,mj2 @ 0xf1fa5000] rfps: 120.000000 0.012228
[mov,mp4,m4a,3gp,3g2,mj2 @ 0xf1fa5000] rfps: 29.970030 0.000295
Last message repeated 1 times
[mov,mp4,m4a,3gp,3g2,mj2 @ 0xf1fa5000] rfps: 59.940060 0.001178
Last message repeated 1 times
[mov,mp4,m4a,3gp,3g2,mj2 @ 0xf1fa5000] Before avformat_find_stream_info() pos: 6937 bytes read:32768 seeks:0 nb_streams:2
[h264 @ 0xf1fda380] nal_unit_type: 7, nal_ref_idc: 1
[h264 @ 0xf1fda380] nal_unit_type: 8, nal_ref_idc: 1
[h264 @ 0xf1fda380] nal_unit_type: 6, nal_ref_idc: 0
[h264 @ 0xf1fda380] nal_unit_type: 5, nal_ref_idc: 1
[h264 @ 0xf1fda380] Format yuv420p chosen by get_format().
[h264 @ 0xf1fda380] Reinit context to 848x480, pix_fmt: yuv420p
[mov,mp4,m4a,3gp,3g2,mj2 @ 0xf1fa5000] All info found
[mov,mp4,m4a,3gp,3g2,mj2 @ 0xf1fa5000] After avformat_find_stream_info() pos: 67446 bytes read:67446 seeks:0 frames:45
Input #0, mov,mp4,m4a,3gp,3g2,mj2, from '/storage/emulated/0/Download/email/VID-20180720-WA0001.mp4':
Metadata:
major_brand : mp42
minor_version : 1
compatible_brands: mp41mp42isom
creation_time : 2018-07-20T19:57:44.000000Z
Duration: 00:00:15.52, start: 0.000000, bitrate: 1679 kb/s
Stream #0:0(und), 1, 1/600: Video: h264, 1 reference frame (avc1 / 0x31637661), yuv420p(tv, bt709, left), 848x480, 0/1, 1622 kb/s, 30.02 fps, 29.97 tbr, 600 tbn, 1200 tbc (default)
Metadata:
rotate : 90
creation_time : 2018-07-20T19:57:44.000000Z
handler_name : Core Media Video
Side data:
displaymatrix: rotation of -90.00 degrees
Stream #0:1(und), 44, 1/44100: Audio: aac (mp4a / 0x6134706D), 44100 Hz, stereo, fltp, 53 kb/s (default)
Metadata:
creation_time : 2018-07-20T19:57:44.000000Z
handler_name : Core Media Audio
Successfully opened the file.
Parsing a group of options: output url /storage/emulated/0/Android/data/com.my.package/files/ThumbTemp/thumb1.bmp.
Applying option vframes (set the number of video frames to output) with argument 1.
Applying option s (set frame size (WxH or abbreviation)) with argument 154:308.
Successfully parsed a group of options.
Opening an output file: /storage/emulated/0/Android/data/com.my.package/files/ThumbTemp/thumb1.bmp.
Successfully opened the file.
detected 8 logical cores
[h264 @ 0xf1fdbf80] nal_unit_type: 7, nal_ref_idc: 1
[h264 @ 0xf1fdbf80] nal_unit_type: 8, nal_ref_idc: 1
Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> bmp (native))
Press [q] to stop, [?] for help
cur_dts is invalid (this is harmless if it occurs once at the start per stream)
Last message repeated 1 times
[h264 @ 0xf1fdbf80] nal_unit_type: 5, nal_ref_idc: 1
[h264 @ 0xf1fdbf80] Format yuv420p chosen by get_format().
[h264 @ 0xf1fdbf80] Reinit context to 848x480, pix_fmt: yuv420p
cur_dts is invalid (this is harmless if it occurs once at the start per stream)
[h264 @ 0xf1fdc300] nal_unit_type: 1, nal_ref_idc: 1
[h264 @ 0xf1fdc680] nal_unit_type: 1, nal_ref_idc: 1
cur_dts is invalid (this is harmless if it occurs once at the start per stream)
Last message repeated 1 times
[h264 @ 0xf1fdca00] nal_unit_type: 1, nal_ref_idc: 1
cur_dts is invalid (this is harmless if it occurs once at the start per stream)
[h264 @ 0xf1fdcd80] nal_unit_type: 1, nal_ref_idc: 1
cur_dts is invalid (this is harmless if it occurs once at the start per stream)
[h264 @ 0xf1fdd100] nal_unit_type: 1, nal_ref_idc: 1
cur_dts is invalid (this is harmless if it occurs once at the start per stream)
[h264 @ 0xf1fdd480] nal_unit_type: 1, nal_ref_idc: 1
cur_dts is invalid (this is harmless if it occurs once at the start per stream)
[h264 @ 0xf1fdd800] nal_unit_type: 1, nal_ref_idc: 1
[h264 @ 0xf1fddb80] nal_unit_type: 1, nal_ref_idc: 1
[graph 0 input from stream 0:0 @ 0xf1fe9360] Setting 'video_size' to value '848x480'
[graph 0 input from stream 0:0 @ 0xf1fe9360] Setting 'pix_fmt' to value '0'
[graph 0 input from stream 0:0 @ 0xf1fe9360] Setting 'time_base' to value '1/600'
[graph 0 input from stream 0:0 @ 0xf1fe9360] Setting 'pixel_aspect' to value '0/1'
[graph 0 input from stream 0:0 @ 0xf1fe9360] Setting 'sws_param' to value 'flags=2'
[graph 0 input from stream 0:0 @ 0xf1fe9360] Setting 'frame_rate' to value '30000/1001'
[graph 0 input from stream 0:0 @ 0xf1fe9360] w:848 h:480 pixfmt:yuv420p tb:1/600 fr:30000/1001 sar:0/1 sws_param:flags=2
[transpose @ 0xf1fe9420] Setting 'dir' to value 'clock'
[scaler_out_0_0 @ 0xf1fe9540] Setting 'w' to value '154'
[scaler_out_0_0 @ 0xf1fe9540] Setting 'h' to value '308'
[scaler_out_0_0 @ 0xf1fe9540] Setting 'flags' to value 'bicubic'
[scaler_out_0_0 @ 0xf1fe9540] w:154 h:308 flags:'bicubic' interl:0
[format @ 0xf1fe95a0] Setting 'pix_fmts' to value 'bgra|bgr24|rgb565le|rgb555le|rgb444le|rgb8|bgr8|rgb4_byte|bgr4_byte|gray|pal8|monob'
[AVFilterGraph @ 0xf1fb20c0] query_formats: 7 queried, 6 merged, 0 already done, 0 delayed
[scaler_out_0_0 @ 0xf1fe9540] picking bgr24 out of 12 ref:yuv420p alpha:0
[transpose @ 0xf1fe9420] w:848 h:480 dir:1 -> w:480 h:848 rotation:clockwise vflip:0
[scaler_out_0_0 @ 0xf1fe9540] w:480 h:848 fmt:yuv420p sar:0/1 -> w:154 h:308 fmt:bgr24 sar:0/1 flags:0x4
Output #0, image2, to '/storage/emulated/0/Android/data/com.my.package/files/ThumbTemp/thumb1.bmp':
Metadata:
major_brand : mp42
minor_version : 1
compatible_brands: mp41mp42isom
encoder : Lavf58.12.100
Stream #0:0(und), 0, 1001/30000: Video: bmp, 1 reference frame, bgr24(left), 154x308, 0/1, q=2-31, 200 kb/s, 29.97 fps, 29.97 tbn, 29.97 tbc (default)
Metadata:
encoder : Lavc58.18.100 bmp
creation_time : 2018-07-20T19:57:44.000000Z
handler_name : Core Media Video
Side data:
displaymatrix: rotation of -0.00 degrees
cur_dts is invalid (this is harmless if it occurs once at the start per stream)
[h264 @ 0xf1fdbf80] nal_unit_type: 1, nal_ref_idc: 1
cur_dts is invalid (this is harmless if it occurs once at the start per stream)
[h264 @ 0xf1fdc300] nal_unit_type: 1, nal_ref_idc: 1
cur_dts is invalid (this is harmless if it occurs once at the start per stream)
[h264 @ 0xf1fdc680] nal_unit_type: 1, nal_ref_idc: 1
cur_dts is invalid (this is harmless if it occurs once at the start per stream)
[h264 @ 0xf1fdca00] nal_unit_type: 1, nal_ref_idc: 1
cur_dts is invalid (this is harmless if it occurs once at the start per stream)
[h264 @ 0xf1fdcd80] nal_unit_type: 1, nal_ref_idc: 1
cur_dts is invalid (this is harmless if it occurs once at the start per stream)
[h264 @ 0xf1fdd100] nal_unit_type: 1, nal_ref_idc: 1
cur_dts is invalid (this is harmless if it occurs once at the start per stream)
[h264 @ 0xf1fdd480] nal_unit_type: 1, nal_ref_idc: 1
cur_dts is invalid (this is harmless if it occurs once at the start per stream)
Last message repeated 9 times
[out_0_0 @ 0xf1fe94e0] EOF on sink link out_0_0:default.
No more output streams to write to, finishing.
frame= 0 fps=0.0 q=0.0 Lsize=N/A time=00:00:00.00 bitrate=N/A speed= 0x 
video:0kB audio:0kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: unknown
Input file #0 (/storage/emulated/0/Download/email/VID-20180720-WA0001.mp4):
Input stream #0:0 (video): 16 packets read (153990 bytes); 16 frames decoded; 
Input stream #0:1 (audio): 0 packets read (0 bytes); 
Total: 16 packets (153990 bytes) demuxed
Output file #0 (/storage/emulated/0/Android/data/com.my.package/files/ThumbTemp/thumb1.bmp):
Output stream #0:0 (video): 0 frames encoded; 0 packets muxed (0 bytes); 
Total: 0 packets (0 bytes) muxed
Output file is empty, nothing was encoded (check -ss / -t / -frames parameters if used)
16 frames successfully decoded, 0 decoding errors
[AVIOContext @ 0xf1fbc000] Statistics: 221436 bytes read, 1 seeks