Recherche avancée

Sur d’autres sites (6707)

• Revision 30229 : On continue à revoir le code en profondeur...

  26 juillet 2009, par kent1@… — Log

  On continue à revoir le code en profondeur…

• How do I get drawtext filter in ffmpeg to work on ubuntu 22.04 ?

  3 décembre 2024, par chovy

  Here's my script, but no matter what I try the drawtext filter is not enabled :

  


  #!/bin/bash

set -e  # Exit on any error

# Define installation directories
INSTALL_DIR="$HOME/ffmpeg_build"
BIN_DIR="$HOME/bin"
SOURCE_DIR="$HOME/ffmpeg_sources"
NUM_CORES=$(nproc)

echo "Creating necessary directories..."
mkdir -p "$INSTALL_DIR" "$BIN_DIR" "$SOURCE_DIR"

# Install required tools and dependencies
echo "Installing build tools and essential libraries..."
sudo apt-get update
sudo apt-get install -y \
  autoconf automake build-essential cmake git-core libass-dev \
  libfreetype6-dev libsdl2-dev libtool libva-dev libvdpau-dev \
  libvorbis-dev libxcb1-dev libxcb-shm0-dev libxcb-xfixes0-dev \
  meson ninja-build pkg-config texinfo wget yasm zlib1g-dev \
  nasm libnuma-dev libfdk-aac-dev libmp3lame-dev libopus-dev \
  libfreetype6 libdrm-dev mercurial

# Remove system-installed x264 and x265 to prevent conflicts
sudo apt-get remove -y libx264-dev libx265-dev x264 x265

# Build dependencies
cd "$SOURCE_DIR"

# Install libx264 (static)
if [ ! -d "$SOURCE_DIR/x264" ]; then
  echo "Building and installing libx264..."
  git clone --branch stable --depth 1 https://code.videolan.org/videolan/x264.git
  cd x264
  make distclean || true
  ./configure --prefix="$INSTALL_DIR" --enable-static --disable-opencl
  make -j$NUM_CORES
  make install
  cd "$SOURCE_DIR"
fi

# Install libx265 (static)
if [ ! -d "$SOURCE_DIR/x265" ]; then
  echo "Building and installing libx265..."
  git clone --depth 1 https://github.com/videolan/x265.git
  cd x265/build/linux
  cmake -G "Unix Makefiles" -DCMAKE_INSTALL_PREFIX="$INSTALL_DIR" \
    -DENABLE_SHARED=OFF -DENABLE_PIC=ON -DENABLE_PKGCONFIG=ON ../../source
  make -j$NUM_CORES
  make install
  cd "$SOURCE_DIR"
fi

# Install libvpx (static)
if [ ! -d "$SOURCE_DIR/libvpx" ]; then
  echo "Building and installing libvpx..."
  git clone --depth 1 https://chromium.googlesource.com/webm/libvpx.git
  cd libvpx
  ./configure --prefix="$INSTALL_DIR" --disable-examples --disable-unit-tests \
    --enable-vp9-highbitdepth --as=yasm --enable-static --enable-pic
  make -j$NUM_CORES
  make install
  cd "$SOURCE_DIR"
fi

# Install libopus (static)
if [ ! -d "$SOURCE_DIR/opus" ]; then
  echo "Building and installing libopus..."
  git clone --depth 1 https://github.com/xiph/opus.git
  cd opus
  ./autogen.sh
  ./configure --prefix="$INSTALL_DIR" --disable-shared
  make -j$NUM_CORES
  make install
  cd "$SOURCE_DIR"
fi

# Install libaom (static)
if [ ! -d "$SOURCE_DIR/aom" ]; then
  echo "Building and installing libaom..."
  git clone --depth 1 https://aomedia.googlesource.com/aom
  mkdir -p aom_build
  cd aom_build
  cmake -G "Unix Makefiles" -DCMAKE_INSTALL_PREFIX="$INSTALL_DIR" \
    -DBUILD_SHARED_LIBS=0 -DENABLE_NASM=1 -DCMAKE_C_FLAGS="-fPIC" ../aom
  make -j$NUM_CORES
  make install
  cd "$SOURCE_DIR"
fi

# Build and install FFmpeg
echo "Building and installing FFmpeg..."
cd "$SOURCE_DIR"
if [ ! -d "$SOURCE_DIR/ffmpeg" ]; then
  git clone --depth 1 https://git.ffmpeg.org/ffmpeg.git ffmpeg
  cd ffmpeg
else
  cd ffmpeg
  git pull
fi

export PKG_CONFIG_PATH="$INSTALL_DIR/lib/pkgconfig:/usr/lib/pkgconfig:/usr/share/pkgconfig:/usr/lib/$(uname -m)-linux-gnu/pkgconfig:$PKG_CONFIG_PATH"

make distclean

./configure \
  --prefix="$INSTALL_DIR" \
  --pkg-config-flags="--static" \
  --extra-cflags="-I$INSTALL_DIR/include" \
  --extra-ldflags="-L$INSTALL_DIR/lib" \
  --extra-libs="-lpthread -lm" \
  --bindir="$BIN_DIR" \
  --enable-gpl \
  --enable-nonfree \
  --enable-libfreetype \
  --enable-libx264 \
  --enable-libvpx \
  --enable-libmp3lame \
  --enable-libopus \
  --enable-libass \
  --enable-libvorbis \
  --enable-libaom \
  --enable-libdrm \
  --enable-version3 \
  --enable-static \
  --disable-shared \
  --enable-small
  
make -j$NUM_CORES
make install

# Add ffmpeg to PATH
echo "export PATH=\"$BIN_DIR:\$PATH\"" >> "$HOME/.bashrc"
source "$HOME/.bashrc"

# Final checks
echo "FFmpeg installation complete. Verifying installation..."
ffmpeg -version



  


  Here is my buildconf which appears correct :

  


  $ ffmpeg -buildconf  

ffmpeg version N-117989-gcb27e478f7 Copyright (c) 2000-2024 the FFmpeg developers
  built with gcc 11 (Ubuntu 11.4.0-1ubuntu1~22.04)
  configuration: --prefix=/usr/local --extra-cflags=-I/home/ubuntu/src/ffmpeg_build/include --extra-ldflags=-L/home/ubuntu/src/ffmpeg_build/lib --bindir=/usr/local/bin --enable-gpl --enable-nonfree --enable-libfreetype --enable-libx264 --enable-libvpx --enable-libmp3lame --enable-libopus --enable-libass --enable-libvorbis --enable-libaom --enable-libdrm --enable-version3 --enable-shared --enable-filter=drawtext  libavutil      59. 47.101 / 59. 47.101  libavcodec     61. 26.100 / 61. 26.100  libavformat    61.  9.100 / 61.  9.100  libavdevice    61.  4.100 / 61.  4.100  libavfilter    10.  6.101 / 10.  6.101  libswscale      8. 12.100 /  8. 12.100  libswresample   5.  4.100 /  5.  4.100
  libpostproc    58.  4.100 / 58.  4.100

  configuration:    --prefix=/usr/local
    --extra-cflags=-I/home/ubuntu/src/ffmpeg_build/include
    --extra-ldflags=-L/home/ubuntu/src/ffmpeg_build/lib
    --bindir=/usr/local/bin
    --enable-gpl    --enable-nonfree    --enable-libfreetype    --enable-libx264    --enable-libvpx    --enable-libmp3lame    --enable-libopus    --enable-libass    --enable-libvorbis    --enable-libaom    --enable-libdrm    --enable-version3    --enable-shared    --enable-filter=drawtext


  


  However the filter drawtext is not enabled :

  


  $ ffmpeg -filters | grep drawtext
ffmpeg version N-117989-gcb27e478f7 Copyright (c) 2000-2024 the FFmpeg developers  built with gcc 11 (Ubuntu 11.4.0-1ubuntu1~22.04)  configuration: --prefix=/usr/local --extra-cflags=-I/home/ubuntu/src/ffmpeg_build/include --extra-ldflags=-L/home/ubuntu/src/ffmpeg_build/lib --bindir=/usr/local/bin --enable-gpl --enable-nonfree --enable-libfreetype --enable-libx264 --enable-libvpx --enable-libmp3lame --enable-libopus --enable-libass --enable-libvorbis --enable-libaom --enable-libdrm --enable-version3 --enable-shared --enable-filter=drawtext  libavutil      59. 47.101 / 59. 47.101  libavcodec     61. 26.100 / 61. 26.100  libavformat    61.  9.100 / 61.  9.100  libavdevice    61.  4.100 / 61.  4.100  libavfilter    10.  6.101 / 10.  6.101  libswscale      8. 12.100 /  8. 12.100  libswresample   5.  4.100 /  5.  4.100  libpostproc    58.  4.100 / 58.  4.100


  


• Converting HLS Stream to stream supported by old radio

  29 novembre 2024, par Alberto Faenza

  I have an old internet radio that does not support HLS streams.
Therefore I cannot listen to my favourite radio at this url :
https://streamcdnf31-4c4b867c89244861ac216426883d1ad0.msvdn.net/radiodeejay/radiodeejay/master_ma.m3u8

  


  I found a solution using a paid software https://minimradio.com/ which is based on minimserver and minimstreamer.

  


  This solution works if I install mininmserver and minimstreamer on a local computer and use the internet radio to point to the converter stream but I will have to pay if I want to use this.

  


  Checking the documentation of minimradio and ministreamer I can see the following :

  


  *Some internet radios can play the previous AAC ADTS streams but can't play these new HLS streams
...

  


  If the network stream URL points to an HLS .m3u8 master playlist or media playlist file, MinimStreamer reads this file and uses the HLS protocol to read the stream audio data and send it to the music player as a conventional HTTP stream. This makes the stream playable on music players that don't support the HLS protocol. The audio data in the stream must be encoded in AAC format.*
and not a single destination receiver I should use a streaming (broadcasting) server. What can I use to do that ?

  


  My question is the following :
Is there a way to replicate what minimstreamer is doing using ffmpeg ?
I have tried this :

  


  


  ffmpeg -re -i https://streamcdnf31-4c4b867c89244861ac216426883d1ad0.msvdn.net/radiodeejay/radiodeejay/master_ma.m3u8 -c copy -listen 1 -f mpegts http://192.168.1.9:10000

  


  


  which is playing corrctly in local vlc on the same computer. But when I stop VLC is got this error in ffmpeg :

  


  [https @ 00000291de047400] Cannot reuse HTTP connection for different host: StreamCdnG20-4c4b867c89244861ac216426883d1ad0.msvdn.net:-1 != 4c4b867c89244861ac216426883d1ad0.msvdn.net:-1
[hls @ 00000291dd96d140] keepalive request failed for 'https://4c4b867c89244861ac216426883d1ad0.msvdn.net/radiodeejay/radiodeejay/play1.m3u8' with error: 'Invalid argument' when parsing playlist
[hls @ 00000291dd96d140] Opening 'https://4c4b867c89244861ac216426883d1ad0.msvdn.net/radiodeejay/radiodeejay/play1.m3u8' for reading
[hls @ 00000291dd96d140] Skip ('#EXT-X-DISCONTINUITY-SEQUENCE:0')
[hls @ 00000291dd96d140] Skip ('#EXT-X-PROGRAM-DATE-TIME:2024-11-29T06:36:56.926Z')
[hls @ 00000291dd96d140] Skip ('#EXT-X-PROGRAM-DATE-TIME:2024-11-29T06:37:07.314Z')
[hls @ 00000291dd96d140] Skip ('#EXT-X-PROGRAM-DATE-TIME:2024-11-29T06:37:17.571Z')
[https @ 00000291de4e00c0] Opening 'https://StreamCdnG20-4c4b867c89244861ac216426883d1ad0.msvdn.net/radiodeejay/radiodeejay/20240722T095729_p1s_001086632.ts' for reading
[aost#0:0/copy @ 00000291de1c4f40] Error submitting a packet to the muxer: Error number -10054 occurred
    Last message repeated 1 times
[out#0/mpegts @ 00000291deaa7e40] Error muxing a packet
[out#0/mpegts @ 00000291deaa7e40] Task finished with error code: -10054 (Error number -10054 occurred)
[out#0/mpegts @ 00000291deaa7e40] Terminating thread with return code -10054 (Error number -10054 occurred)
[out#0/mpegts @ 00000291deaa7e40] Error writing trailer: Error number -10054 occurred
[http @ 00000291de8870c0] URL read error: Error number -10054 occurred
[out#0/mpegts @ 00000291deaa7e40] Error closing file: Error number -10054 occurred
[out#0/mpegts @ 00000291deaa7e40] video:0KiB audio:797KiB subtitle:0KiB other streams:0KiB global headers:0KiB muxing overhead: 21.849292%
size=     971KiB time=00:00:50.98 bitrate= 156.0kbits/s speed=1.01x
Conversion failed!


  


  And if I try to connect from my internet radio I immediately got this error :

  


  [aost#0:0/copy @ 0000027081584a40] Error submitting a packet to the muxer: Error number -10053 occurred
    Last message repeated 1 times
[out#0/mpegts @ 0000027081e684c0] Error muxing a packet
[out#0/mpegts @ 0000027081e684c0] Task finished with error code: -10053 (Error number -10053 occurred)
[out#0/mpegts @ 0000027081e684c0] Terminating thread with return code -10053 (Error number -10053 occurred)
[out#0/mpegts @ 0000027081e684c0] Error writing trailer: Error number -10053 occurred
[http @ 0000027081c47680] URL read error: Error number -10053 occurred
[out#0/mpegts @ 0000027081e684c0] Error closing file: Error number -10053 occurred
[out#0/mpegts @ 0000027081e684c0] video:0KiB audio:46KiB subtitle:0KiB other streams:0KiB global headers:0KiB muxing overhead: 13.917515%
size=      52KiB time=00:00:02.94 bitrate= 145.1kbits/s speed= 1.2x
Conversion failed!


  


  What is the correct way to stream this one locally in order to be listened in my internet radio ?
Shall I use ffmpeg or can be done directly with ngnix ? Or shall I use both ?