Recherche avancée
Médias (1)
-
Revolution of Open-source and film making towards open film making
6 octobre 2011, par
Mis à jour : Juillet 2013
Langue : English
Type : Texte
Autres articles (33)
-
Publier sur MédiaSpip
13 juin 2013Puis-je poster des contenus à partir d’une tablette Ipad ?
Oui, si votre Médiaspip installé est à la version 0.2 ou supérieure. Contacter au besoin l’administrateur de votre MédiaSpip pour le savoir -
Automated installation script of MediaSPIP
25 avril 2011, parTo overcome the difficulties mainly due to the installation of server side software dependencies, an "all-in-one" installation script written in bash was created to facilitate this step on a server with a compatible Linux distribution.
You must have access to your server via SSH and a root account to use it, which will install the dependencies. Contact your provider if you do not have that.
The documentation of the use of this installation script is available here.
The code of this (...) -
Emballe médias : à quoi cela sert ?
4 février 2011, parCe plugin vise à gérer des sites de mise en ligne de documents de tous types.
Il crée des "médias", à savoir : un "média" est un article au sens SPIP créé automatiquement lors du téléversement d’un document qu’il soit audio, vidéo, image ou textuel ; un seul document ne peut être lié à un article dit "média" ;
Sur d’autres sites (6593)
-
FFMPEG Keyframes Exception
3 avril 2017, par newToRacketI was hoping someone could help me, when pulling keyframes from a .mp4 file using FFMPEG in python I get this error :
C:\Python27\python.exe "C:/Coll. Detection/UAS_Detection/GUI.py"
in GUI main
('filePath', PyQt4.QtCore.QString(u'C:\\Users\\Razor\\Downloads\\video_test_512kb.mp4'), '\n')
File Path -> C:\Users\Razor\Downloads\video_test_512kb.mp4
SingleDetect C:\Users\Razor\Downloads\video_test_512kb.mp4
ffmpeg version N-84679-gd65b595 Copyright (c) 2000-2017 the FFmpeg developers
built with gcc 6.3.0 (GCC)
configuration: --enable-gpl --enable-version3 --enable-cuda --enable-cuvid --enable-d3d11va --enable-dxva2 --enable-libmfx --enable-nvenc --enable-avisynth --enable-bzlib --enable-fontconfig --enable-frei0r --enable-gnutls --enable-iconv --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libfreetype --enable-libgme --enable-libgsm --enable-libilbc --enable-libmodplug --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenh264 --enable-libopenjpeg --enable-libopus --enable-librtmp --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvo-amrwbenc --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxavs --enable-libxvid --enable-libzimg --enable-lzma --enable-zlib
libavutil 55. 51.100 / 55. 51.100
libavcodec 57. 86.103 / 57. 86.103
libavformat 57. 67.100 / 57. 67.100
libavdevice 57. 3.101 / 57. 3.101
libavfilter 6. 78.100 / 6. 78.100
libswscale 4. 3.101 / 4. 3.101
libswresample 2. 4.100 / 2. 4.100
libpostproc 54. 2.100 / 54. 2.100
Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'C:\Users\Razor\Downloads\video_test_512kb.mp4':
Metadata:
major_brand : isom
minor_version : 512
compatible_brands: mp41
creation_time : 1970-01-01T00:00:00.000000Z
title : test file mp4 - http://www.archive.org/details/Pbtestfilemp4videotestmp4
encoder : Lavf51.10.0
comment : license: http://creativecommons.org/licenses/by-nc-sa/2.5/
Duration: 00:00:16.27, start: 0.000000, bitrate: 562 kb/s
Stream #0:0(und): Video: h264 (Constrained Baseline) (avc1 / 0x31637661), yuv420p, 320x240 [SAR 1:1 DAR 4:3], 512 kb/s, 15 fps, 15 tbr, 15 tbn, 30 tbc (default)
Metadata:
creation_time : 1970-01-01T00:00:00.000000Z
handler_name : VideoHandler
Stream #0:1(und): Audio: aac (LC) (mp4a / 0x6134706D), 44100 Hz, stereo, fltp, 45 kb/s (default)
Metadata:
creation_time : 1970-01-01T00:00:00.000000Z
handler_name : SoundHandler
Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> mjpeg (native))
Press [q] to stop, [?] for help
[swscaler @ 0000000003500e00] deprecated pixel format used, make sure you did set range correctly
Output #0, image2, to 'tmp/%d.jpeg':
Metadata:
major_brand : isom
minor_version : 512
compatible_brands: mp41
comment : license: http://creativecommons.org/licenses/by-nc-sa/2.5/
title : test file mp4 - http://www.archive.org/details/Pbtestfilemp4videotestmp4
encoder : Lavf57.67.100
Stream #0:0(und): Video: mjpeg, yuvj420p(pc), 320x240 [SAR 1:1 DAR 4:3], q=2-31, 200 kb/s, 15 fps, 15 tbn, 15 tbc (default)
Metadata:
creation_time : 1970-01-01T00:00:00.000000Z
handler_name : VideoHandler
encoder : Lavc57.86.103 mjpeg
Side data:
cpb: bitrate max/min/avg: 0/0/200000 buffer size: 0 vbv_delay: -1
2017-04-02 18:36:07.832000
Traceback (most recent call last):
File "Detection.py", line 59, in <module>
draw_detections(frame, found)
File "Detection.py", line 32, in draw_detections
result = Result.objects.create(picture=img, x=x, y=y, w=w, h=h)
AttributeError: type object 'Result' has no attribute 'objects'
frame= 21 fps=0.0 q=19.3 Lsize=N/A time=00:00:16.06 bitrate=N/A speed= 191x
video:160kB audio:0kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: unknown
Process finished with exit code 0
</module>I’m trying to run these keyframes through an opencv human shape recognition api. It saves close to 300 keyframes to the folder I specified but for some reason the program just hangs afterwords instead of running the open cv hogger api on the newly saved keyframes. Will post script if it will help. Thank you for any help you can provide !!!
-
avcodec/sanm : codec20 decoder
17 mars, par Manuel Lauss -
Using FFmpeg encode and UDP with a Webcam ?
14 mars, par RendresI'm trying to get frames from a Webcam using OpenCV, encode them with FFmpeg and send them using UDP.


I did before a similar project that instead of sending the packets with UDP, it saved them in a video file.


My code is.


#include 
#include 
#include 
#include 

extern "C" {
#include <libavcodec></libavcodec>avcodec.h>
#include <libavformat></libavformat>avformat.h>
#include <libavutil></libavutil>opt.h>
#include <libavutil></libavutil>imgutils.h>
#include <libavutil></libavutil>mathematics.h>
#include <libswscale></libswscale>swscale.h>
#include <libswresample></libswresample>swresample.h>
}

#include <opencv2></opencv2>opencv.hpp>

using namespace std;
using namespace cv;

#define WIDTH 640
#define HEIGHT 480
#define CODEC_ID AV_CODEC_ID_H264
#define STREAM_PIX_FMT AV_PIX_FMT_YUV420P

static AVFrame *frame, *pFrameBGR;

int main(int argc, char **argv)
{
VideoCapture cap(0);
const char *url = "udp://127.0.0.1:8080";

AVFormatContext *formatContext;
AVStream *stream;
AVCodec *codec;
AVCodecContext *c;
AVDictionary *opts = NULL;

int ret, got_packet;

if (!cap.isOpened())
{
 return -1;
}

av_log_set_level(AV_LOG_TRACE);

av_register_all();
avformat_network_init();

avformat_alloc_output_context2(&formatContext, NULL, "h264", url);
if (!formatContext)
{
 av_log(NULL, AV_LOG_FATAL, "Could not allocate an output context for '%s'.\n", url);
}

codec = avcodec_find_encoder(CODEC_ID);
if (!codec)
{
 av_log(NULL, AV_LOG_ERROR, "Could not find encoder.\n");
}

stream = avformat_new_stream(formatContext, codec);

c = avcodec_alloc_context3(codec);

stream->id = formatContext->nb_streams - 1;
stream->time_base = (AVRational){1, 25};

c->codec_id = CODEC_ID;
c->bit_rate = 400000;
c->width = WIDTH;
c->height = HEIGHT;
c->time_base = stream->time_base;
c->gop_size = 12;
c->pix_fmt = STREAM_PIX_FMT;

if (formatContext->flags & AVFMT_GLOBALHEADER)
 c->flags |= AV_CODEC_FLAG_GLOBAL_HEADER;

av_dict_set(&opts, "preset", "fast", 0);

av_dict_set(&opts, "tune", "zerolatency", 0);

ret = avcodec_open2(c, codec, NULL);
if (ret < 0)
{
 av_log(NULL, AV_LOG_ERROR, "Could not open video codec.\n");
}

pFrameBGR = av_frame_alloc();
if (!pFrameBGR)
{
 av_log(NULL, AV_LOG_ERROR, "Could not allocate video frame.\n");
}

frame = av_frame_alloc();
if (!frame)
{
 av_log(NULL, AV_LOG_ERROR, "Could not allocate video frame.\n");
}

frame->format = c->pix_fmt;
frame->width = c->width;
frame->height = c->height;

ret = avcodec_parameters_from_context(stream->codecpar, c);
if (ret < 0)
{
 av_log(NULL, AV_LOG_ERROR, "Could not open video codec.\n");
}

av_dump_format(formatContext, 0, url, 1);

ret = avformat_write_header(formatContext, NULL);
if (ret != 0)
{
 av_log(NULL, AV_LOG_ERROR, "Failed to connect to '%s'.\n", url);
}

Mat image(Size(HEIGHT, WIDTH), CV_8UC3);
SwsContext *swsctx = sws_getContext(WIDTH, HEIGHT, AV_PIX_FMT_BGR24, WIDTH, HEIGHT, AV_PIX_FMT_YUV420P, SWS_BILINEAR, NULL, NULL, NULL);
int frame_pts = 0;

while (1)
{
 cap >> image;

 int numBytesYUV = av_image_get_buffer_size(STREAM_PIX_FMT, WIDTH, HEIGHT, 1);
 uint8_t *bufferYUV = (uint8_t *)av_malloc(numBytesYUV * sizeof(uint8_t));

 avpicture_fill((AVPicture *)pFrameBGR, image.data, AV_PIX_FMT_BGR24, WIDTH, HEIGHT);
 avpicture_fill((AVPicture *)frame, bufferYUV, STREAM_PIX_FMT, WIDTH, HEIGHT);

 sws_scale(swsctx, (uint8_t const *const *)pFrameBGR->data, pFrameBGR->linesize, 0, HEIGHT, frame->data, frame->linesize);

 AVPacket pkt = {0};
 av_init_packet(&pkt);

 frame->pts = frame_pts;

 ret = avcodec_encode_video2(c, &pkt, frame, &got_packet);
 if (ret < 0)
 {
 av_log(NULL, AV_LOG_ERROR, "Error encoding frame\n");
 }

 if (got_packet)
 {
 pkt.pts = av_rescale_q_rnd(pkt.pts, c->time_base, stream->time_base, AVRounding(AV_ROUND_NEAR_INF | AV_ROUND_PASS_MINMAX));
 pkt.dts = av_rescale_q_rnd(pkt.dts, c->time_base, stream->time_base, AVRounding(AV_ROUND_NEAR_INF | AV_ROUND_PASS_MINMAX));
 pkt.duration = av_rescale_q(pkt.duration, c->time_base, stream->time_base);
 pkt.stream_index = stream->index;

 return av_interleaved_write_frame(formatContext, &pkt);

 cout << "Seguro que si" << endl;
 }
 frame_pts++;
}

avcodec_free_context(&c);
av_frame_free(&frame);
avformat_free_context(formatContext);

return 0;
}


The code compiles but it returns Segmentation fault in the function av_interleaved_write_frame(). I've tried several implementations or several codecs (in this case I'm using libopenh264, but using mpeg2video returns the same segmentation fault). I tried also with av_write_frame() but it returns the same error.


As I told before, I only want to grab frames from a webcam connected via USB, encode them to H264 and send the packets through UDP to another PC.


My console log when I run the executable is.


[100%] Built target display
[OpenH264] this = 0x0x244b4f0, Info:CWelsH264SVCEncoder::SetOption():ENCODER_OPTION_TRACE_CALLBACK callback = 0x7f0c302a87c0.
[libopenh264 @ 0x244aa00] [OpenH264] this = 0x0x244b4f0, Info:CWelsH264SVCEncoder::InitEncoder(), openh264 codec version = 5a5c4f1
[libopenh264 @ 0x244aa00] [OpenH264] this = 0x0x244b4f0, Info:iUsageType = 0,iPicWidth= 640;iPicHeight= 480;iTargetBitrate= 400000;iMaxBitrate= 400000;iRCMode= 0;iPaddingFlag= 0;iTemporalLayerNum= 1;iSpatialLayerNum= 1;fFrameRate= 25.000000f;uiIntraPeriod= 12;eSpsPpsIdStrategy = 0;bPrefixNalAddingCtrl = 0;bSimulcastAVC=0;bEnableDenoise= 0;bEnableBackgroundDetection= 1;bEnableSceneChangeDetect = 1;bEnableAdaptiveQuant= 1;bEnableFrameSkip= 0;bEnableLongTermReference= 0;iLtrMarkPeriod= 30, bIsLosslessLink=0;iComplexityMode = 0;iNumRefFrame = 1;iEntropyCodingModeFlag = 0;uiMaxNalSize = 0;iLTRRefNum = 0;iMultipleThreadIdc = 1;iLoopFilterDisableIdc = 0 (offset(alpha/beta): 0,0;iComplexityMode = 0,iMaxQp = 51;iMinQp = 0)
[libopenh264 @ 0x244aa00] [OpenH264] this = 0x0x244b4f0, Info:sSpatialLayers[0]: .iVideoWidth= 640; .iVideoHeight= 480; .fFrameRate= 25.000000f; .iSpatialBitrate= 400000; .iMaxSpatialBitrate= 400000; .sSliceArgument.uiSliceMode= 1; .sSliceArgument.iSliceNum= 0; .sSliceArgument.uiSliceSizeConstraint= 1500;uiProfileIdc = 66;uiLevelIdc = 41
[libopenh264 @ 0x244aa00] [OpenH264] this = 0x0x244b4f0, Warning:SliceArgumentValidationFixedSliceMode(), unsupported setting with Resolution and uiSliceNum combination under RC on! So uiSliceNum is changed to 6!
[libopenh264 @ 0x244aa00] [OpenH264] this = 0x0x244b4f0, Info:Setting MaxSpatialBitrate (400000) the same at SpatialBitrate (400000) will make the actual bit rate lower than SpatialBitrate
[libopenh264 @ 0x244aa00] [OpenH264] this = 0x0x244b4f0, Warning:bEnableFrameSkip = 0,bitrate can't be controlled for RC_QUALITY_MODE,RC_BITRATE_MODE and RC_TIMESTAMP_MODE without enabling skip frame.
[libopenh264 @ 0x244aa00] [OpenH264] this = 0x0x244b4f0, Warning:Change QP Range from(0,51) to (12,42)
[libopenh264 @ 0x244aa00] [OpenH264] this = 0x0x244b4f0, Info:WELS CPU features/capacities (0x4007fe3f) detected: HTT: Y, MMX: Y, MMXEX: Y, SSE: Y, SSE2: Y, SSE3: Y, SSSE3: Y, SSE4.1: Y, SSE4.2: Y, AVX: Y, FMA: Y, X87-FPU: Y, 3DNOW: N, 3DNOWEX: N, ALTIVEC: N, CMOV: Y, MOVBE: Y, AES: Y, NUMBER OF LOGIC PROCESSORS ON CHIP: 8, CPU CACHE LINE SIZE (BYTES): 64
[libopenh264 @ 0x244aa00] [OpenH264] this = 0x0x244b4f0, Info:WelsInitEncoderExt() exit, overall memory usage: 4542878 bytes
[libopenh264 @ 0x244aa00] [OpenH264] this = 0x0x244b4f0, Info:WelsInitEncoderExt(), pCtx= 0x0x245a400.
Output #0, h264, to 'udp://192.168.100.39:8080':
Stream #0:0, 0, 1/25: Video: h264 (libopenh264), 1 reference frame, yuv420p, 640x480 (0x0), 0/1, q=2-31, 400 kb/s, 25 tbn
[libopenh264 @ 0x244aa00] [OpenH264] this = 0x0x244b4f0, Debug:RcUpdateIntraComplexity iFrameDqBits = 385808,iQStep= 2016,iIntraCmplx = 777788928
[libopenh264 @ 0x244aa00] [OpenH264] this = 0x0x244b4f0, Debug:[Rc]Layer 0: Frame timestamp = 0, Frame type = 2, encoding_qp = 30, average qp = 30, max qp = 33, min qp = 27, index = 0, iTid = 0, used = 385808, bitsperframe = 16000, target = 64000, remainingbits = -257808, skipbuffersize = 200000
[libopenh264 @ 0x244aa00] [OpenH264] this = 0x0x244b4f0, Debug:WelsEncoderEncodeExt() OutputInfo iLayerNum = 2,iFrameSize = 48252
[libopenh264 @ 0x244aa00] [OpenH264] this = 0x0x244b4f0, Debug:WelsEncoderEncodeExt() OutputInfo iLayerId = 0,iNalType = 0,iNalCount = 2, first Nal Length=18,uiSpatialId = 0,uiTemporalId = 0,iSubSeqId = 0
[libopenh264 @ 0x244aa00] [OpenH264] this = 0x0x244b4f0, Debug:WelsEncoderEncodeExt() OutputInfo iLayerId = 1,iNalType = 1,iNalCount = 6, first Nal Length=6057,uiSpatialId = 0,uiTemporalId = 0,iSubSeqId = 0
[libopenh264 @ 0x244aa00] 6 slices
./scriptBuild.sh: line 20: 10625 Segmentation fault (core dumped) ./display


As you can see, FFmpeg uses libopenh264 and configures it correctly. However, no matter what. It always returns the same Segmentation fault error...


I've used commands like this.


ffmpeg -s 640x480 -f video4linux2 -i /dev/video0 -r 30 -vcodec libopenh264 -an -f h264 udp://127.0.0.1:8080


And it works perfectly, but I need to process the frames before sending them. Thats why I'm trying to use the libs.


My FFmpeg version is.


ffmpeg version 3.3.6 Copyright (c) 2000-2017 the FFmpeg developers
built with gcc 4.8 (Ubuntu 4.8.4-2ubuntu1~14.04.3)
configuration: --disable-yasm --enable-shared --enable-libopenh264 --cc='gcc -fPIC'
libavutil 55. 58.100 / 55. 58.100
libavcodec 57. 89.100 / 57. 89.100
libavformat 57. 71.100 / 57. 71.100
libavdevice 57. 6.100 / 57. 6.100
libavfilter 6. 82.100 / 6. 82.100
libswscale 4. 6.100 / 4. 6.100
libswresample 2. 7.100 / 2. 7.100


I tried to get more information of the error using gbd, but it didn't give me debugging info.


How can I solve this problem ?


Syndiquer tout le site
