Recherche avancée

Sur d’autres sites (9649)

• ffmpeg, no sound from i2s adafruit microphone card (rasp 3 B)

  22 août 2018, par Mikhaël Gerbet

  I have a Raspberry pi 3 B with Strech OS + a Microphone card (i2s mems adafruit).

  I would like to make a simple record with ffmpeg (to stream after).

  When a do :

   $ arecord -D dmic_sv -c2 -r 48000 -f S32_LE -t wav -V mono -v out.wav

  it works !

  But when i try with ffmpeg, i have a audio file without sound :/

  $ ffmpeg -f alsa -ac 2 -ar 44100  -i default:CARD=sndrpisimplecar -t 10 out.wav

  The difference between the audio file generated by arecord and ffmpeg is the bits. 32 bits with arecord and 16 bits with ffmpeg.

  Maybe the problème is here ? i don’t know...

  Thank you for your help :)

  EDIT :

  now, i can generate a 32 bits audio file with

  ffmpeg -f alsa -i default:CARD=sndrpisimplecar -c:a pcm_s32le out.wav 

  but i have no sound from the microphone. So the problem is not the bit format...

  Just for more information, the input device to ffmpeg is default:CARD=sndrpisimplecar because i have founded this id in arecord -l

  **** Liste des Périphériques Matériels CAPTURE ****
  
  carte 1: sndrpisimplecar [snd_rpi_simple_card], périphérique 0: simple- card_codec_link snd-soc-dummy-dai-0 []
  
    Sous-périphériques: 1/1
  
    Sous-périphérique #0: subdevice #0

• FFmpeg source files wild card

  29 mars 2018, par Some1Else

  I am joining a series of image files into a movie file with FFmpeg.

  Files start at XYZ00000.PNG, XYZ00001.PNG etc. I refer to them as XYZ%05d.PNG in the FFmpeg command line.

  That works fine.

  But, if I delete the first (for example) 30 frames so my frame images start at XYZ00031.PNG onwards FFmpeg fails to build with an error ;

  [image2 @ 00000000043f2b40] Could find no file with path 'XYZ%05d.PNG' and index in the range 0-4
  
  XYZ%05d.PNG: No such file or directory

  Is there an alternate wildcard I can use to get FFmpeg to start at whatever the lowest numbered frame is ?

  If I rename XYZ00031.PNG to XYZ00000.PNG the build works, but only adds the single first frame. It ignores the other frames.

• ffmpeg command line for capturing (and recording) audio and video in 720p from decklink card using Windows 7

  6 janvier 2018, par Huron

  I am trying to capture audio and video from a blackmagic decklink capture card using Windows 7 @ 720p, but I cant seem to get the ffmpeg command line settings right.

  ffmpeg -list_devices true -f dshow -i dummy

  [dshow @ 02457a60] DirectShow video devices
  
  [dshow @ 02457a60]  "Blackmagic WDM Capture"
  
  [dshow @ 02457a60]  "Decklink Video Capture"
  
  [dshow @ 02457a60] DirectShow audio devices
  
  [dshow @ 02457a60]  "Decklink Audio Capture"

  ffmpeg -list_options true -f dshow -i video="Decklink Video Capture"

  [dshow @ 03c2ea20] DirectShow video device options
  
  [dshow @ 03c2ea20]  Pin "Capture"
  
  [dshow @ 03c2ea20]   pixel_format=uyvy422  min s=720x486 fps=29.97 max s=720x486 fps=29.97
  
  [dshow @ 03c2ea20]   pixel_format=uyvy422  min s=720x486 fps=23.976 max s=720x486 fps=23.976
  
  [dshow @ 03c2ea20]   pixel_format=uyvy422  min s=720x576 fps=25 max s=720x576 fps=25
  
  [dshow @ 03c2ea20]   pixel_format=uyvy422  min s=720x486 fps=59.9402 max s=720x486 fps=59.9402
  
  [dshow @ 03c2ea20]   pixel_format=uyvy422  min s=720x576 fps=50 max s=720x576 fps=50
  
  [dshow @ 03c2ea20]   pixel_format=uyvy422  min s=1920x1080 fps=23.976 max s=1920x1080 fps=23.976
  
  [dshow @ 03c2ea20]   pixel_format=uyvy422  min s=1920x1080 fps=24 max s=1920x1080 fps=24
  
  [dshow @ 03c2ea20]   pixel_format=uyvy422  min s=1920x1080 fps=25 max s=1920x1080 fps=25
  
  [dshow @ 03c2ea20]   pixel_format=uyvy422  min s=1920x1080 fps=29.97 max s=1920x1080 fps=29.97
  
  [dshow @ 03c2ea20]   pixel_format=uyvy422  min s=1920x1080 fps=30 max s=1920x1080 fps=30
  
  [dshow @ 03c2ea20]   pixel_format=uyvy422  min s=1280x720 fps=50 max s=1280x720fps=50
  
  [dshow @ 03c2ea20]   pixel_format=uyvy422  min s=1280x720 fps=59.9402 max s=1280x720 fps=59.9402
  
  [dshow @ 03c2ea20]   pixel_format=uyvy422  min s=1280x720 fps=60.0002 max s=1280x720 fps=60.0002

  ffmpeg -list_options true -f dshow -i audio="Decklink Audio Capture"

  [dshow @ 047fea20] DirectShow audio device options
  
  [dshow @ 047fea20]  Pin "Capture"
  
  [dshow @ 047fea20]   min ch=1 bits=16 rate= 48000 max ch=1 bits=16 rate= 48000
  
  [dshow @ 047fea20]   min ch=2 bits=16 rate= 48000 max ch=2 bits=16 rate= 48000
  
  [dshow @ 047fea20]   min ch=4 bits=16 rate= 48000 max ch=4 bits=16 rate= 48000
  
  [dshow @ 047fea20]   min ch=6 bits=16 rate= 48000 max ch=6 bits=16 rate= 48000
  
  [dshow @ 047fea20]   min ch=8 bits=16 rate= 48000 max ch=8 bits=16 rate= 48000
  
  [dshow @ 047fea20]   min ch=10 bits=16 rate= 48000 max ch=10 bits=16 rate= 48000
  
  [dshow @ 047fea20]   min ch=12 bits=16 rate= 48000 max ch=12 bits=16 rate= 48000
  
  [dshow @ 047fea20]   min ch=16 bits=16 rate= 48000 max ch=16 bits=16 rate= 48000

  This is the stream information for my current video/audio source, connected to the decklink card’s hdmi port

  Stream #0:0: Video: rawvideo (UYVY / 0x59565955), uyvy422(tv), 1280x720, 59.94 tbr, 10000k tbn, 59.94 tbc
  
  Stream #0:1: Audio: pcm_s16le, 48000 Hz, stereo, s16, 1536 kb/s

  Ultimately I will need to display this video on screen. And simultaneously be able to start and stop recording, while the preview keeps playing.

  My idea was to use ffmpeg to capture the video and audio signal and transmit this to a network stream (eg 127.0.0.1:6666). Then use VLC player to display the stream (the preview). And ultimately start and/or stop another ffmpeg to save that same stream to disk.

  In my mind this works, but I am no audio/video expert so if anyone with more experience could help out, I would appreciate it.

  Update :

  I have been able to display the video using ffplay, with the following command :

  ffplay -f dshow -video_size 1280x720 -rtbufsize 702000k -framerate 60 -i video="Decklink Video Capture":audio="Decklink Audio Capture" -threads 2

  Next step is streaming it so I can view the stream (preview) with VLC.

  Tried to use this command :

  ffmpeg -f dshow -video_size 1280x720 -rtbufsize 702000k -framerate 60 -i video="Decklink Video Capture":audio="Decklink Audio Capture" -threads 2 -f mpegts rtp://127.0.0.1:6666?pkt_size=188?buffer_size=65535

  Which does not give any errors, so appears to work. But when I try to open the stream in VLC I get the following error :

  SDP required :
  A description in SDP format is required to receive the RTP stream. Note that rtp :// URIs cannot work with dynamic RTP payload format (65).

  After a bit of reading it seems I should not be streaming to rtp :// but rather to udp ://

  Command became :

  ffmpeg -f dshow -video_size 1280x720 -rtbufsize 702000k -framerate 60 -i video="Decklink Video Capture":audio="Decklink Audio Capture" -threads 2 -f mpegts udp://127.0.0.1:6666?pkt_size=188?buffer_size=65535

  And when I try to open it now in VLC I get no error, no warning, but also no video.

  Time for some more reading.