Recherche avancée

Sur d’autres sites (9356)

• How can I publish an RTSP stream to a MediaMTX instance with TLS encryption configured ? [closed]

  15 février 2024, par cmd

  I have an instance of (MediaMTX) running on my laptop. I have an Amcrest IP camera. I can publish the camera's RTSP stream to the server so that the stream can be accessed from the MediaMTX instance.

  


  However, I want to encrypt the stream. On the Github page for MediaMTX, they detail how TLS encryption can be enabled for incoming and outgoing RTSP streams by generating a server.key and server.crt and editing lines in the .yml configuration file. Streams can then be published and read with RTSPS and port 8322.

  


  I have followed these steps, and set up the following path for my IP camera in the .yml :

  


  ###############################################
# Path settings

# Settings in "paths" are applied to specific paths, and the map key
# is the name of the path.
# Any setting in "pathDefaults" can be overridden here.
# It's possible to use regular expressions by using a tilde as prefix,
# for example "~^(test1|test2)$" will match both "test1" and "test2",
# for example "~^prefix" will match all paths that start with "prefix".
paths:

  cam1:
    source: rtsp://user:password@192.168.68.142:554
    runOnInit: ffmpeg -i rtsp://user:password@192.168.68.142:554 -c:v copy -c:a copy -f rtsp rtsps://localhost:8322/stream/cam1


  


  But I am getting the following output from my MediaMTX instance when it runs :

  


  2024/02/15 18:20:59 INF [path cam1] [RTSP source] ready: 2 tracks (H264, MPEG-4 Audio)
Input #0, rtsp, from 'rtsp://user:password@192.168.68.142:554':
  Metadata:
    title           : Media Server
  Duration: N/A, start: 0.030000, bitrate: N/A
  Stream #0:0: Video: h264 (Main), yuv420p(progressive), 1920x1080, 100 tbr, 90k tbn
  Stream #0:1: Audio: aac (LC), 16000 Hz, mono, fltp
Stream mapping:
  Stream #0:0 -> #0:0 (copy)
  Stream #0:1 -> #0:1 (copy)
2024/02/15 18:21:00 INF [RTSPS] [conn [::1]:60147] opened
2024/02/15 18:21:00 INF [RTSPS] [session 07a8f23e] created by [::1]:60147
2024/02/15 18:21:00 INF [RTSPS] [conn [::1]:60147] closed: path 'stream/cam1' is not configured
2024/02/15 18:21:00 INF [RTSPS] [session 07a8f23e] destroyed: not in use
[out#0/rtsp @ 00000225c75fe9c0] Could not write header (incorrect codec parameters ?): Server returned 400 Bad Request
Conversion failed!
2024/02/15 18:21:00 INF [path cam1] runOnInit command exited: command exited with code 3486501640
2024/02/15 18:21:29 WAR [path cam1] [RTSP source] 10 RTP packets lost
2024/02/15 18:21:33 WAR [path cam1] [RTSP source] 2 RTP packets lost
2024/02/15 18:21:39 WAR [path cam1] [RTSP source] 11 RTP packets lost


  


  I have no errors and was able to publish the stream with the same path configuration (using rtsp ://, not rtsps ://) when using no encryption. What possible solutions can I try ?

  


• VideoJS for HLS streaming not working on iOS

  13 février 2024, par Aames

  I have a website where I stream audio using HLS (m3u8 playlist + ts files).
I use VideoJS 8.3.0 to handle the stream in the frontend side.
The streaming works in all devices (PC, Android, Mac) except in iOS where it works intermittently and often it blocks.

  


  Here is my videojs initialization :

  


  player = videojs('stream-id', {
            controls: false, autoplay: true, preload: 'auto',
            html5: {
               vhs: {overrideNative: false},
               nativeAudioTracks: true
           }
        });

...

player.src({ type: 'application/x-mpegURL', src: 'https://.../master.m3u8' });



  


  And these are the headers of the m3u8 file :

  


  #EXTM3U
#EXT-X-VERSION:3
#EXT-X-TARGETDURATION:10
#EXT-X-PROGRAM-DATE-TIME:2024-02-13T09:00:00Z
#EXT-X-MEDIA-SEQUENCE:0
#EXT-X-DISCONTINUITY
#EXTINF:10.007800,
master0.ts
#EXTINF:7.214989,
master1.ts
....


  


  I use ffmpeg to create the playlist from mp3 files :

  


  ffmpeg -i inputFileName -c:a aac -b:a 128k -ac 2 -f hls -hls_time 10 -preset ultrafast -map 0:a -flags -global_header -hls_list_size 0 -hls_flags append_list outputFileName



  


  Am I doing something wrong ? Any help would be appreciated
Thanks

  


  I tried this solution : Videojs HLS m3u8 files are not playing in iOS devices and safari browser but it does not work for me

  


• FFmpeg and reserved color primaries [closed]

  21 janvier, par Yoz

  I am trying to get thumbnails from a hevc video downloaded from https://github.com/stashapp/stash/issues/4124#issuecomment-1720057183 and it works with most recent ffmpeg 7.1 (installed via homebrew on mac) printing :

  


  ffmpeg -i input.mp4 -frames:v 1 out.jpg


  


  ffmpeg version 7.1 Copyright (c) 2000-2024 the FFmpeg developers
  built with Apple clang version 16.0.0 (clang-1600.0.26.4)
  configuration: --prefix=/opt/homebrew/Cellar/ffmpeg/7.1_4 --enable-shared --enable-pthreads --enable-version3 --cc=clang --host-cflags= --host-ldflags='-Wl,-ld_classic' --enable-ffplay --enable-gnutls --enable-gpl --enable-libaom --enable-libaribb24 --enable-libbluray --enable-libdav1d --enable-libharfbuzz --enable-libjxl --enable-libmp3lame --enable-libopus --enable-librav1e --enable-librist --enable-librubberband --enable-libsnappy --enable-libsrt --enable-libssh --enable-libsvtav1 --enable-libtesseract --enable-libtheora --enable-libvidstab --enable-libvmaf --enable-libvorbis --enable-libvpx --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxml2 --enable-libxvid --enable-lzma --enable-libfontconfig --enable-libfreetype --enable-frei0r --enable-libass --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-libspeex --enable-libsoxr --enable-libzmq --enable-libzimg --disable-libjack --disable-indev=jack --enable-videotoolbox --enable-audiotoolbox --enable-neon
  libavutil      59. 39.100 / 59. 39.100
  libavcodec     61. 19.100 / 61. 19.100
  libavformat    61.  7.100 / 61.  7.100
  libavdevice    61.  3.100 / 61.  3.100
  libavfilter    10.  4.100 / 10.  4.100
  libswscale      8.  3.100 /  8.  3.100
  libswresample   5.  3.100 /  5.  3.100
  libpostproc    58.  3.100 / 58.  3.100
[hevc @ 0x134f07530] VPS 0 does not exist
[hevc @ 0x134f07530] SPS 0 does not exist.
Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'input.mp4':
  Metadata:
    major_brand     : mp42
    minor_version   : 512
    compatible_brands: mp42iso2mp41
    creation_time   : 2023-09-14T19:46:05.000000Z
    encoder         : HandBrake 1.5.1 2022011000
  Duration: 00:01:26.05, start: 0.000000, bitrate: 231 kb/s
  Stream #0:0[0x1](und): Video: hevc (Main) (hvc1 / 0x31637668), yuv420p(tv, bt709/reserved/bt709), 648x648 [SAR 1:1 DAR 1:1], 188 kb/s, 30 fps, 30 tbr, 90k tbn (default)
      Metadata:
        creation_time   : 2023-09-14T19:46:05.000000Z
        handler_name    : VideoHandler
        vendor_id       : [0][0][0][0]
  Stream #0:1[0x2](und): Audio: aac (LC) (mp4a / 0x6134706D), 44100 Hz, mono, fltp, 36 kb/s (default)
      Metadata:
        creation_time   : 2023-09-14T19:46:05.000000Z
        handler_name    : Mono
        vendor_id       : [0][0][0][0]
[hevc @ 0x1358065c0] VPS 0 does not exist
[hevc @ 0x1358065c0] SPS 0 does not exist.
Stream mapping:
  Stream #0:0 -> #0:0 (hevc (native) -> mjpeg (native))
Press [q] to stop, [?] for help
Output #0, image2, to 'out.jpg':
  Metadata:
    major_brand     : mp42
    minor_version   : 512
    compatible_brands: mp42iso2mp41
    encoder         : Lavf61.7.100
  Stream #0:0(und): Video: mjpeg, yuv420p(pc, bt709/reserved/bt709, progressive), 648x648 [SAR 1:1 DAR 1:1], q=2-31, 200 kb/s, 30 fps, 30 tbn (default)
      Metadata:
        creation_time   : 2023-09-14T19:46:05.000000Z
        handler_name    : VideoHandler
        vendor_id       : [0][0][0][0]
        encoder         : Lavc61.19.100 mjpeg
      Side data:
        cpb: bitrate max/min/avg: 0/0/200000 buffer size: 0 vbv_delay: N/A
[image2 @ 0x134f16080] The specified filename 'out.jpg' does not contain an image sequence pattern or a pattern is invalid.
[image2 @ 0x134f16080] Use a pattern such as %03d for an image sequence or use the -update option (with -frames:v 1 if needed) to write a single image.
[out#0/image2 @ 0x134f10480] video:5KiB audio:0KiB subtitle:0KiB other streams:0KiB global headers:0KiB muxing overhead: unknown
frame=    1 fps=0.0 q=5.1 Lsize=N/A time=00:00:00.03 bitrate=N/A speed=4.07x   


  


  however, when I use custom compiled ffmpeg.wasm it fails with :

  


  ffmpeg version N-118050-ga518b5540d Copyright (c) 2000-2024 the FFmpeg developers
  built with emcc (Emscripten gcc/clang-like replacement + linker emulating GNU ld) 3.1.73 (ac676d5e437525d15df5fd46bc2c208ec6d376a3)
  configuration: --target-os=none --arch=x86_32 --enable-cross-compile --enable-version3 --enable-zlib --enable-libaom --disable-encoder=libaom_av1 --enable-libopenh264 --enable-libkvazaar --enable-libvpx --enable-libmp3lame --enable-libtheora --enable-libvorbis --enable-libopus --enable-libwebp --enable-libsvtav1 --enable-librubberband --disable-x86asm --disable-inline-asm --disable-stripping --disable-programs --disable-doc --disable-debug --disable-runtime-cpudetect --disable-autodetect --extra-cflags='-O3 -flto -I/ffmpeg-wasm/build/include -pthread -msimd128' --extra-cxxflags='-O3 -flto -I/ffmpeg-wasm/build/include -pthread -msimd128' --extra-ldflags='-O3 -flto -I/ffmpeg-wasm/build/include -pthread -msimd128 -L/ffmpeg-wasm/build/lib' --pkg-config-flags=--static --nm=emnm --ar=emar --ranlib=emranlib --cc=emcc --cxx=em++ --objcc=emcc --dep-cc=emcc --enable-gpl --enable-libx264 --enable-libx265
  libavutil      59. 49.100 / 59. 49.100
  libavcodec     61. 26.100 / 61. 26.100
  libavformat    61.  9.100 / 61.  9.100
  libavdevice    61.  4.100 / 61.  4.100
  libavfilter    10.  6.101 / 10.  6.101
  libswscale      8. 12.100 /  8. 12.100
  libswresample   5.  4.100 /  5.  4.100
  libpostproc    58.  4.100 / 58.  4.100
[hevc @ 0x38d0000] VPS 0 does not exist
[hevc @ 0x38d0000] SPS 0 does not exist.
Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'input.mp4':
  Metadata:
    major_brand     : mp42
    minor_version   : 512
    compatible_brands: mp42iso2mp41
    creation_time   : 2023-09-14T19:46:05.000000Z
    encoder         : HandBrake 1.5.1 2022011000
  Duration: 00:01:26.05, start: 0.000000, bitrate: 231 kb/s
  Stream #0:0[0x1](und): Video: hevc (Main) (hvc1 / 0x31637668), yuv420p(tv, bt709/reserved/bt709), 648x648 [SAR 1:1 DAR 1:1], 188 kb/s, 30 fps, 30 tbr, 90k tbn (default)
    Metadata:
      creation_time   : 2023-09-14T19:46:05.000000Z
      handler_name    : VideoHandler
      vendor_id       : [0][0][0][0]
  Stream #0:1[0x2](und): Audio: aac (LC) (mp4a / 0x6134706D), 44100 Hz, mono, fltp, 36 kb/s (default)
    Metadata:
      creation_time   : 2023-09-14T19:46:05.000000Z
      handler_name    : Mono
      vendor_id       : [0][0][0][0]
[hevc @ 0x38d0300] VPS 0 does not exist
[hevc @ 0x38d0300] SPS 0 does not exist.
Stream mapping:
  Stream #0:0 -> #0:0 (hevc (native) -> mjpeg (native))
Press [q] to stop, [?] for help
[swscaler @ 0x8ca0000] Unsupported input (Not supported): fmt:yuv420p csp:bt709 prim:reserved trc:bt709 -> fmt:yuv420p csp:bt709 prim:reserved trc:bt709
[vf#0:0 @ 0x3830900] Error while filtering: Not supported
[vf#0:0 @ 0x3830900] Task finished with error code: -138 (Not supported)
[vost#0:0/mjpeg @ 0x385ae40] [enc:mjpeg @ 0x3878b80] Could not open encoder before EOF
[vf#0:0 @ 0x3830900] Terminating thread with return code -138 (Not supported)
[vost#0:0/mjpeg @ 0x385ae40] Task finished with error code: -28 (Invalid argument)
[vost#0:0/mjpeg @ 0x385ae40] Terminating thread with return code -28 (Invalid argument)
[out#0/image2 @ 0x3851580] Nothing was written into output file, because at least one of its streams received no packets.
frame=    0 fps=0.0 q=0.0 Lsize=       0KiB time=N/A bitrate=N/A speed=N/A    
Conversion failed!
Process finished with exit code -138.


  


  I figured out the issue is color primaries prim:reserved, and the command can be updated to a working one by re-writing input primaries as following :

  


  ffmpeg -i input.mp4 -vf "colorspace=all=bt709:iprimaries=bt709" -frames:v 1 out.jpg


  


  However, I would like to compile ffmpeg.wasm so that it handles reserved primaries just like the one from homebrew.

  


  Any idea what the compiled ffmpeg.wasm is missing ?