Recherche avancée

Sur d’autres sites (10464)

• FFmpeg concatenate video and add watermark

  18 avril 2020, par user7356972

  I have command to overlay two video one on other.

  



  ffmpeg -i input.mp4 -vf "movie= overlay.mov [a]; [1][a]scale2ref[2nd][ref];[2nd][ref]overlay=0:0 [c]"  output.mp4 


  



  Now I want to add water watermark and concatenate a new video append.mov in above command. I have found a command to add watermark.

  



  ffmpeg -i output.mp4 -i watermark.png -filter_complex "overlay=10:10" outputwatermark.mp4


  



  But I want to merge both the command and also need to concatenate append.mov to output.mp4.

  



  Also above overlay two video command takes too long time to process if video size is large. Any suggestion on that(should not affect quality of video) ?

  



  I tried following command to concatenate video.

  



  ffmpeg -i abc.mp4 -i ../input/overlay2.mov append.mp4


  



  The video was not concatenate, below is the output.

  



  ffmpeg version 4.2.2 Copyright (c) 2000-2019 the FFmpeg developers
  built with Apple clang version 11.0.0 (clang-1100.0.33.17)
  configuration: --prefix=/usr/local/Cellar/ffmpeg/4.2.2_2 --enable-shared --enable-pthreads --enable-version3 --enable-avresample --cc=clang --host-cflags= --host-ldflags= --enable-ffplay --enable-gnutls --enable-gpl --enable-libaom --enable-libbluray --enable-libmp3lame --enable-libopus --enable-librubberband --enable-libsnappy --enable-libtesseract --enable-libtheora --enable-libvidstab --enable-libvorbis --enable-libvpx --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxvid --enable-lzma --enable-libfontconfig --enable-libfreetype --enable-frei0r --enable-libass --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-librtmp --enable-libspeex --enable-libsoxr --enable-videotoolbox --disable-libjack --disable-indev=jack
  libavutil      56. 31.100 / 56. 31.100
  libavcodec     58. 54.100 / 58. 54.100
  libavformat    58. 29.100 / 58. 29.100
  libavdevice    58.  8.100 / 58.  8.100
  libavfilter     7. 57.100 /  7. 57.100
  libavresample   4.  0.  0 /  4.  0.  0
  libswscale      5.  5.100 /  5.  5.100
  libswresample   3.  5.100 /  3.  5.100
  libpostproc    55.  5.100 / 55.  5.100
Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'abc.mp4':
  Metadata:
    major_brand     : isom
    minor_version   : 512
    compatible_brands: isomiso2avc1mp41
    encoder         : Lavf58.29.100
  Duration: 00:00:37.40, start: 0.000000, bitrate: 474 kb/s
    Stream #0:0(eng): Video: h264 (High) (avc1 / 0x31637661), yuv420p, 960x540 [SAR 3:4 DAR 4:3], 324 kb/s, 1k fps, 1k tbr, 16k tbn, 2k tbc (default)
    Metadata:
      handler_name    : VideoHandler
    Stream #0:1(eng): Audio: aac (LC) (mp4a / 0x6134706D), 48000 Hz, mono, fltp, 69 kb/s (default)
    Metadata:
      handler_name    : SoundHandler
Input #1, mov,mp4,m4a,3gp,3g2,mj2, from '../input/overlay2.mov':
  Metadata:
    major_brand     : qt  
    minor_version   : 537199360
    compatible_brands: qt  
    creation_time   : 2020-03-27T16:32:23.000000Z
  Duration: 00:00:37.44, start: 0.000000, bitrate: 3519 kb/s
    Stream #1:0(eng): Video: qtrle (rle  / 0x20656C72), argb(progressive), 640x352, 3295 kb/s, SAR 1:1 DAR 20:11, 25 fps, 25 tbr, 25 tbn, 25 tbc (default)
    Metadata:
      creation_time   : 2020-03-27T16:32:23.000000Z
      handler_name    : Apple Video Media Handler
      encoder         : Animation
      timecode        : 00:00:00:00
    Stream #1:1(eng): Data: none (tmcd / 0x64636D74) (default)
    Metadata:
      creation_time   : 2020-03-27T16:32:23.000000Z
      handler_name    : Time Code Media Handler
      timecode        : 00:00:00:00
File 'append.mp4' already exists. Overwrite ? [y/N] y
Stream mapping:
  Stream #0:0 -> #0:0 (h264 (native) -> h264 (libx264))
  Stream #0:1 -> #0:1 (aac (native) -> aac (native))
Press [q] to stop, [?] for help
[libx264 @ 0x7ff35a012200] using SAR=3/4
[libx264 @ 0x7ff35a012200] using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2 AVX FMA3 BMI2 AVX2
[libx264 @ 0x7ff35a012200] profile High, level 5.2
[libx264 @ 0x7ff35a012200] 264 - core 155 r2917 0a84d98 - H.264/MPEG-4 AVC codec - Copyleft 2003-2018 - http://www.videolan.org/x264.html - options: cabac=1 ref=3 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=7 psy=1 psy_rd=1.00:0.00 mixed_ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=-2 threads=6 lookahead_threads=1 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2 b_adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=25 scenecut=40 intra_refresh=0 rc_lookahead=40 rc=crf mbtree=1 crf=23.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00
Output #0, mp4, to 'append.mp4':
  Metadata:
    major_brand     : isom
    minor_version   : 512
    compatible_brands: isomiso2avc1mp41
    encoder         : Lavf58.29.100
    Stream #0:0(eng): Video: h264 (libx264) (avc1 / 0x31637661), yuv420p(progressive), 960x540 [SAR 3:4 DAR 4:3], q=-1--1, 1k fps, 16k tbn, 1k tbc (default)
    Metadata:
      handler_name    : VideoHandler
      encoder         : Lavc58.54.100 libx264
    Side data:
      cpb: bitrate max/min/avg: 0/0/0 buffer size: 0 vbv_delay: -1
    Stream #0:1(eng): Audio: aac (LC) (mp4a / 0x6134706D), 48000 Hz, mono, fltp, 69 kb/s (default)
    Metadata:
      handler_name    : SoundHandler
      encoder         : Lavc58.54.100 aac
frame=37399 fps=378 q=-1.0 Lsize=    2138kB time=00:00:37.39 bitrate= 468.4kbits/s speed=0.378x    
video:1454kB audio:221kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: 27.624002%
[libx264 @ 0x7ff35a012200] frame I:150   Avg QP:11.47  size:  1655
[libx264 @ 0x7ff35a012200] frame P:9423  Avg QP:14.43  size:    52
[libx264 @ 0x7ff35a012200] frame B:27826 Avg QP:17.67  size:    27
[libx264 @ 0x7ff35a012200] consecutive B-frames:  0.8%  0.0%  0.0% 99.2%
[libx264 @ 0x7ff35a012200] mb I  I16..4: 94.0%  4.3%  1.7%
[libx264 @ 0x7ff35a012200] mb P  I16..4:  0.0%  0.0%  0.0%  P16..4:  0.1%  0.0%  0.0%  0.0%  0.0%    skip:99.8%
[libx264 @ 0x7ff35a012200] mb B  I16..4:  0.0%  0.0%  0.0%  B16..8:  0.1%  0.0%  0.0%  direct: 0.0%  skip:99.9%  L0:54.5% L1:45.5% BI: 0.1%
[libx264 @ 0x7ff35a012200] 8x8 transform intra:4.8% inter:84.4%
[libx264 @ 0x7ff35a012200] coded y,uvDC,uvAC intra: 1.6% 2.3% 2.0% inter: 0.0% 0.0% 0.0%
[libx264 @ 0x7ff35a012200] i16 v,h,dc,p: 96%  0%  3%  0%
[libx264 @ 0x7ff35a012200] i8 v,h,dc,ddl,ddr,vr,hd,vl,hu: 58%  9% 28%  1%  1%  1%  1%  1%  1%
[libx264 @ 0x7ff35a012200] i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 38% 22% 15%  4%  4%  5%  5%  4%  4%
[libx264 @ 0x7ff35a012200] i8c dc,h,v,p: 97%  1%  1%  0%
[libx264 @ 0x7ff35a012200] Weighted P-Frames: Y:1.9% UV:1.9%
[libx264 @ 0x7ff35a012200] ref P L0: 86.3%  8.4%  4.5%  0.8%  0.0%
[libx264 @ 0x7ff35a012200] ref B L0: 75.4% 24.0%  0.5%
[libx264 @ 0x7ff35a012200] ref B L1: 98.1%  1.9%
[libx264 @ 0x7ff35a012200] kb/s:318.42
[aac @ 0x7ff35a013a00] Qavg: 152.336


  


• adding delay to an audio stream of a live feed in ffmpeg

  19 avril 2020, par blackirishman

  I am currently capturing video via a Blackmagic decklink card on macOS. My audio and video are out of sync. The audio is ahead about a second. I suspect the video is slower on account of encoding latency. My solution is to retard the audio using the ffmpeg adelay filter. I originally added a -af "adelay=1000|1000" to my command to delay the audio by 1000ms but I found that this audio filter did nothing. Consequently, I tried to build a complex_filter, but this failed. My command is producing too many streams that ffmpeg can't route them to the proper rtp endpoint. So what is the best way to delay the audio and can I select which streams map to rtp endpoints ?

  



  ffmpeg \
-format_code 23ps \
-f decklink \
-i "DeckLink HD Extreme 3" \
-filter_complex "[0:a] adelay=2s|2s [delayed]" \
-map [delayed] -map 0:v \
-r 24 \
-g 1 \
-s 1920x1080 \
-quality realtime \
-speed 8 \
-threads 8 \
-row-mt 1 \
-tile-columns 2 \
-frame-parallel 1 \
-qmin 30 \
-qmax 35 \
-b:v 2000k \
-pix_fmt yuv420p \
-c:v libvpx-vp9 \
-strict experimental \
-an -f rtp rtp://myurl.com:5004?pkt_size=1300 \
-c:a libopus \
-b:a 128k \
-vn -f rtp rtp://myurl.com:5002?pkt_size=1300


  



  adding a full log when running the command with out any delay :

  



  -filter_complex "[0:a] adelay=2s|2s [delayed]" \
-map [delayed] -map 0:v \

ffmpeg version N-97362-g889ad93c88 Copyright (c) 2000-2020 the FFmpeg developers
  built with Apple LLVM version 9.0.0 (clang-900.0.39.2)
  configuration: --prefix=/usr/local --pkg-config-flags=--static --extra-cflags='-fno-stack-check -I/Users/admin/Documents/ffmpeg_build/include -I/Users/admin/Documents/BDS/Mac/include' --extra-ldflags=-L/Users/admin/Documents/ffmpeg_build/lib --extra-libs='-lpthread -lm' --bindir=/Users/admin/Documents/ffmpeg_build/bin --enable-gpl --enable-libass --enable-libfdk-aac --enable-libfreetype --enable-libmp3lame --enable-libopus --enable-libvorbis --enable-libvpx --enable-libx264 --enable-libx265 --enable-nonfree --enable-decklink
  libavutil      56. 42.102 / 56. 42.102
  libavcodec     58. 80.100 / 58. 80.100
  libavformat    58. 42.100 / 58. 42.100
  libavdevice    58.  9.103 / 58.  9.103
  libavfilter     7. 77.101 /  7. 77.101
  libswscale      5.  6.101 /  5.  6.101
  libswresample   3.  6.100 /  3.  6.100
  libpostproc    55.  6.100 / 55.  6.100
[decklink @ 0x7fcfb2000000] Found Decklink mode 1920 x 1080 with rate 23.98
[decklink @ 0x7fcfb2000000] Frame received (#2) - No input signal detected - Frames dropped 1
Guessed Channel Layout for Input Stream #0.0 : stereo
Input #0, decklink, from 'DeckLink HD Extreme 3':
  Duration: N/A, start: 0.000000, bitrate: 797002 kb/s
    Stream #0:0: Audio: pcm_s16le, 48000 Hz, stereo, s16, 1536 kb/s
    Stream #0:1: Video: rawvideo (UYVY / 0x59565955), uyvy422(progressive), 1920x1080, 795466 kb/s, 23.98 tbr, 1000k tbn, 1000k tbc
[decklink @ 0x7fcfb2000000] Frame received (#3) - Input returned - Frames dropped 2
Stream mapping:
  Stream #0:1 -> #0:0 (rawvideo (native) -> vp9 (libvpx-vp9))
  Stream #0:0 -> #1:0 (pcm_s16le (native) -> opus (libopus))
Press [q] to stop, [?] for help
[libvpx-vp9 @ 0x7fcfb180d200] v1.8.2
Output #0, rtp, to 'rtp://myurl.com.com:5004?pkt_size=1300':
  Metadata:
    encoder         : Lavf58.42.100
    Stream #0:0: Video: vp9 (libvpx-vp9), yuv420p, 1920x1080, q=30-35, 2000 kb/s, 24 fps, 90k tbn, 24 tbc
    Metadata:
      encoder         : Lavc58.80.100 libvpx-vp9
    Side data:
      cpb: bitrate max/min/avg: 0/0/0 buffer size: 0 vbv_delay: N/A
Output #1, rtp, to 'rtp://myrul.com:5002?pkt_size=1300':
  Metadata:
    encoder         : Lavf58.42.100
    Stream #1:0: Audio: opus (libopus), 48000 Hz, stereo, s16, 128 kb/s
    Metadata:
      encoder         : Lavc58.80.100 libopus
SDP:
v=0
o=- 0 0 IN IP4 127.0.0.1
s=No Name
t=0 0
a=tool:libavformat 58.42.100
m=video 5004 RTP/AVP 96
c=IN IP4 54.183.58.143
b=AS:2000
a=rtpmap:96 VP9/90000
m=audio 5002 RTP/AVP 97
c=IN IP4 54.183.58.143
b=AS:128
a=rtpmap:97 opus/48000/2
a=fmtp:97 sprop-stereo=1

frame=  434 fps= 24 q=0.0 size=   37063kB time=00:00:18.09 bitrate=16780.7kbits/s speed=1.01x   


  


• avcodec/adpcm_ima_{apc, ssi, oki} : replace while() with for()

  18 avril 2020, par Zane van Iperen

  avcodec/adpcm_ima_apc, ssi, oki : replace while() with for()
  Per discussion at https://ffmpeg.org/pipermail/ffmpeg-devel/2020-April/260854.html
  Signed-off-by : Zane van Iperen <zane@zanevaniperen.com>
  
  Signed-off-by : Michael Niedermayer <michael@niedermayer.cc>
  

  • [DH] libavcodec/adpcm.c