Recherche avancée

Sur d’autres sites (8687)

• ffmpeg stops capturing whole hour of HTTP stream after some time

  7 juillet 2020, par CompuChip

  First of all, sorry if I'm using the wrong terminology. I've been playing around with nginx and I'm still a bit confused about RTMP and HLS and other acronyms.

  


  I've managed to setup OBS to stream to an nginx server, which takes the RTMP stream and chops it into pieces for HLS. Here's the relevant part of the nginx configuration file.

  


  rtmp {
    server {
        listen 1935;
        chunk_size 4000;
        ping 30s;
        deny play all;

        application live {
            live on;
            hls on;
            hls_nested on; # Create a new folder for each stream
            hls_path /mnt/hls/live;
            hls_fragment 3s;
            hls_fragment_naming timestamp;
            hls_playlist_length 60s;
        }
    }
}

http {
    server {
        listen 81 ssl;

        #creates the http-location for our full-resolution (desktop) HLS stream - "http://localhost:8080/live/test/index.m3u8"
        location /live {
            # Elided caching and CORS for brevity

            alias /mnt/hls/live;
            add_header Cache-Control no-cache;
            index index.m3u8;
        }
    }
}


  


  This works well, I can view the stream in VLC or on a website and it looks smooth. Now I wanted to add some logging : I'd like to write full hours (starting at xx:00:00 and ending at xx:59:59) to a file named log_yyyymmdd_hh.mp4, e.g. log_20200707_18.mp4 for the files of 7 July 2020, 18:00 - 19:00 hrs. So I've set up an hourly cron job with the following ffmpeg command :

  


  ffmpeg -i https://stream.example.com:81/live/<streamkey> -preset veryfast -maxrate 2000k \&#xA;    -bufsize 2000k -g 60 -t 3600 -y /var/video/log/$(date &#x2B;\%Y\%m\%d_\%H00).mp4 >/dev/null 2>&amp;1&#xA;</streamkey>

  


  At first this seemed to work well, so I left it running happily for about 24 hours. When I checked, most of my hourly files were small ( 100MB) files of about 10 to 15 minutes long. It seems like any small delay in the stream will cause ffmpeg to stop writing to the file. I suspect such hiccups may for example be caused by an OBS plugin and I'll need to look into that, but I would prefer that ffmpeg will retry for some time before giving up. What arguments should I be passing to ffmpeg to make it not break when the stream is down for, say, up to a second every now and then ?.

  


  When I view back the HLS files there don't seem to be any noticeable gaps, so eventually all the data arrives. I went for the crontab solution with ffmpeg because when recording from nginx I could not figure out how to start recording at the start of the whole hour.

  


• FFmpeg matlab error : At least one output file must be specified ? [closed]

  3 mars, par as moh

  I'm trying to get I frames from a video using Matlab using this command system(sprintf('ffmpeg -i testVid.mp4 -vf "select=eq(pict_type\,I)" -vsync vfr output_%03d.png')); ,but i get this message

  


   ffmpeg version 7.1-full_build-www.gyan.dev Copyright (c) 2000-2024 the FFmpeg developers 
  built with gcc 14.2.0 (Rev1, Built by MSYS2 project) 
  configuration: --enable-gpl --enable-version3 --enable-static --disable-w32threads --disable-autodetect --enable-fontconfig --enable-iconv --enable-gnutls --enable-libxml2 --enable-gmp --enable-bzlib --enable-lzma --enable-libsnappy --enable-zlib --enable-librist --enable-libsrt --enable-libssh --enable-libzmq --enable-avisynth --enable-libbluray --enable-libcaca --enable-sdl2 --enable-libaribb24 --enable-libaribcaption --enable-libdav1d --enable-libdavs2 --enable-libopenjpeg --enable-libquirc --enable-libuavs3d --enable-libxevd --enable-libzvbi --enable-libqrencode --enable-librav1e --enable-libsvtav1 --enable-libvvenc --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxavs2 --enable-libxeve --enable-libxvid --enable-libaom --enable-libjxl --enable-libvpx --enable-mediafoundation --enable-libass --enable-frei0r --enable-libfreetype --enable-libfribidi --enable-libharfbuzz --enable-liblensfun --enable-libvidstab --enable-libvmaf --enable-libzimg --enable-amf --enable-cuda-llvm --enable-cuvid --enable-dxva2 --enable-d3d11va --enable-d3d12va --enable-ffnvcodec --enable-libvpl --enable-nvdec --enable-nvenc --enable-vaapi --enable-libshaderc --enable-vulkan --enable-libplacebo --enable-opencl --enable-libcdio --enable-libgme --enable-libmodplug --enable-libopenmpt --enable-libopencore-amrwb --enable-libmp3lame --enable-libshine --enable-libtheora --enable-libtwolame --enable-libvo-amrwbenc --enable-libcodec2 --enable-libilbc --enable-libgsm --enable-liblc3 --enable-libopencore-amrnb --enable-libopus --enable-libspeex --enable-libvorbis --enable-ladspa --enable-libbs2b --enable-libflite --enable-libmysofa --enable-librubberband --enable-libsoxr --enable-chromaprint 
  libavutil      59. 39.100 / 59. 39.100 
  libavcodec     61. 19.100 / 61. 19.100 
  libavformat    61.  7.100 / 61.  7.100 
  libavdevice    61.  3.100 / 61.  3.100 
  libavfilter    10.  4.100 / 10.  4.100 
  libswscale      8.  3.100 /  8.  3.100 
  libswresample   5.  3.100 /  5.  3.100 
  libpostproc    58.  3.100 / 58.  3.100 
Trailing option(s) found in the command: may be ignored. 
Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'testVid.mp4': 
  Metadata: 
    major_brand     : isom 
    minor_version   : 512 
    compatible_brands: isomiso2avc1mp41 
    encoder         : Lavf57.83.100 
  Duration: 00:00:02.02, start: 0.000000, bitrate: 12798 kb/s 
  Stream #0:0[0x1](eng): Video: h264 (Baseline) (avc1 / 0x31637661), yuvj420p(pc, progressive), 1280x720 [SAR 1:1 DAR 16:9], 12662 kb/s, 29.74 fps, 30 tbr, 90k tbn (default) 
      Metadata: 
        handler_name    : VideoHandler 
        vendor_id       : [0][0][0][0] 
  Stream #0:1[0x2](eng): Audio: aac (LC) (mp4a / 0x6134706D), 48000 Hz, mono, fltp, 121 kb/s (default) 
      Metadata: 
        handler_name    : SoundHandler 
        vendor_id       : [0][0][0][0] 
At least one output file must be specified 


  


  i searched and tried many cases but i don't know where is the problem, any help please ?

  


• ffmpeg Non monotonous DTS, Previous DTS is always the same, audio microphone streaming [closed]

  5 février, par adrien gonzalez

  I'm using ffmpeg to stream audio from a microphone using rtp. I'm on Raspberry and use an external sound card (HifiBerry DAC + ADC Pro).
My goal is to stream audio with the lowest latency possible to others Raspberry reading this audio with ffplay. I try not to compress the audio flux and leave it untouched as wav 48000 Hz.
I encounter often some Non Monotonous DTS errors. When this happens I have a latency of hundred of milliseconds adding itself.
I tried to add the +igndts flag but it is not changing anything. Also tried +genpts flag.

  


  What is weird is that the previous DTS is always the same (201165 is the example below) and does not seems to change.
I looked on forums for answers but I'm unable to find one.

  


  Here is my bash command :

  


  ffmpeg -guess_layout_max 0 -re -f alsa -i hw -acodec pcm_s16le -ac 1 -payload_type 10 -f rtp rtp://192.168.1.152:5003

  


  And the result from the terminal :

  


  ffmpeg version 5.1.6-0+deb12u1+rpt1 Copyright (c) 2000-2024 the FFmpeg developers


built with gcc 12 (Debian 12.2.0-14)
  configuration: --prefix=/usr --extra-version=0+deb12u1+rpt1 --toolchain=hardened --incdir=/usr/include/aarch64-linux-gnu --enable-gpl --disable-stripping --disable-mmal --enable-gnutls --enable-ladspa --enable-libaom --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libcodec2 --enable-libdav1d --enable-libflite --enable-libfontconfig --enable-libfreetype --enable-libfribidi --enable-libglslang --enable-libgme --enable-libgsm --enable-libjack --enable-libmp3lame --enable-libmysofa --enable-libopenjpeg --enable-libopenmpt --enable-libopus --enable-libpulse --enable-librabbitmq --enable-librist --enable-librubberband --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libsrt --enable-libssh --enable-libsvtav1 --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvorbis --enable-libvpx --enable-libwebp --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzimg --enable-libzmq --enable-libzvbi --enable-lv2 --enable-omx --enable-openal --enable-opencl --enable-opengl --enable-sand --enable-sdl2 --disable-sndio --enable-libjxl --enable-neon --enable-v4l2-request --enable-libudev --enable-epoxy --libdir=/usr/lib/aarch64-linux-gnu --arch=arm64 --enable-pocketsphinx --enable-librsvg --enable-libdc1394 --enable-libdrm --enable-vout-drm --enable-libiec61883 --enable-chromaprint --enable-frei0r --enable-libx264 --enable-libplacebo --enable-librav1e --enable-shared
  libavutil      57. 28.100 / 57. 28.100
  libavcodec     59. 37.100 / 59. 37.100
  libavformat    59. 27.100 / 59. 27.100
  libavdevice    59.  7.100 / 59.  7.100
  libavfilter     8. 44.100 /  8. 44.100
  libswscale      6.  7.100 /  6.  7.100
  libswresample   4.  7.100 /  4.  7.100
  libpostproc    56.  6.100 / 56.  6.100
Input #0, alsa, from 'hw':
  Duration: N/A, start: 1738663653.066577, bitrate: 1536 kb/s
  Stream #0:0: Audio: pcm_s16le, 48000 Hz, 2 channels, s16, 1536 kb/s
Stream mapping:
  Stream #0:0 -> #0:0 (pcm_s16le (native) -> pcm_s16le (native))
Press [q] to stop, [?] for help
Output #0, rtp, to 'rtp://192.168.1.152:5003':
  Metadata:
    encoder         : Lavf59.27.100
  Stream #0:0: Audio: pcm_s16le, 48000 Hz, mono, s16, 768 kb/s
    Metadata:
      encoder         : Lavc59.37.100 pcm_s16le
SDP:
v=0
o=- 0 0 IN IP4 127.0.0.1
s=No Name
c=IN IP4 192.168.1.152
t=0 0
a=tool:libavformat LIBAVFORMAT_VERSION
m=audio 5003 RTP/AVP 10
b=AS:768

[rtp @ 0x558b48ea90] Non-monotonous DTS in output stream 0:0; previous: 201165, current: 201160; changing to 201165. This may result in incorrect timestamps in the output file.
[rtp @ 0x558b48ea90] Non-monotonous DTS in output stream 0:0; previous: 201165, current: 201155; changing to 201165. This may result in incorrect timestamps in the output file.
[rtp @ 0x558b48ea90] Non-monotonous DTS in output stream 0:0; previous: 201165, current: 201149; changing to 201165. This may result in incorrect timestamps in the output file.
[rtp @ 0x558b48ea90] Non-monotonous DTS in output stream 0:0; previous: 201165, current: 201142; changing to 201165. This may result in incorrect timestamps in the output file.
[rtp @ 0x558b48ea90] Non-monotonous DTS in output stream 0:0; previous: 201165, current: 201134; changing to 201165. This may result in incorrect timestamps in the output file.
[rtp @ 0x558b48ea90] Non-monotonous DTS in output stream 0:0; previous: 201165, current: 201124; changing to 201165. This may result in incorrect timestamps in the output file.
[rtp @ 0x558b48ea90] Non-monotonous DTS in output stream 0:0; previous: 201165, current: 201114; changing to 201165. This may result in incorrect timestamps in the output file.
[rtp @ 0x558b48ea90] Non-monotonous DTS in output stream 0:0; previous: 201165, current: 201102; changing to 201165. This may result in incorrect timestamps in the output file.
[rtp @ 0x558b48ea90] Non-monotonous DTS in output stream 0:0; previous: 201165, current: 201089; changing to 201165. This may result in incorrect timestamps in the output file.
[rtp @ 0x558b48ea90] Non-monotonous DTS in output stream 0:0; previous: 201165, current: 201075; changing to 201165. This may result in incorrect timestamps in the output file.
[rtp @ 0x558b48ea90] Non-monotonous DTS in output stream 0:0; previous: 201165, current: 201060; changing to 201165. This may result in incorrect timestamps in the output file.
[rtp @ 0x558b48ea90] Non-monotonous DTS in output stream 0:0; previous: 201165, current: 201044; changing to 201165. This may result in incorrect timestamps in the output file.
[rtp @ 0x558b48ea90] Non-monotonous DTS in output stream 0:0; previous: 201165, current: 201027; changing to 201165. This may result in incorrect timestamps in the output file.
[rtp @ 0x558b48ea90] Non-monotonous DTS in output stream 0:0; previous: 201165, current: 201009; changing to 201165. This may result in incorrect timestamps in the output file.
[rtp @ 0x558b48ea90] Non-monotonous DTS in output stream 0:0; previous: 201165, current: 200990; changing to 201165. This may result in incorrect timestamps in the output file.
[rtp @ 0x558b48ea90] Non-monotonous DTS in output stream 0:0; previous: 201165, current: 200970; changing to 201165. This may result in incorrect timestamps in the output file.
[rtp @ 0x558b48ea90] Non-monotonous DTS in output stream 0:0; previous: 201165, current: 200949; changing to 201165. This may result in incorrect timestamps in the output file.


  


  I tried to add the +igndts flag but it is not changing anything. Also tried +genpts flag. I expected the DTS to restore itself but I still have the same issue