Recherche avancée

Recherche
Choix de la période de publication
Date minimale :

Date maximale :

Type de date :
Choix de la langue
Choix du type de média
Choix de la rubrique
Choix de la licence de publication
Choix de l’auteur

Médias (1)

Mot : - Tags -/MediaSPIP

Autres articles (45)

Les autorisations surchargées par les plugins

27 avril 2010, par kent1

Mediaspip core
autoriser_auteur_modifier() afin que les visiteurs soient capables de modifier leurs informations sur la page d’auteurs
Publier sur MédiaSpip

13 juin 2013

Puis-je poster des contenus à partir d’une tablette Ipad ?
Oui, si votre Médiaspip installé est à la version 0.2 ou supérieure. Contacter au besoin l’administrateur de votre MédiaSpip pour le savoir
Les tâches Cron régulières de la ferme

1er décembre 2010, par kent1

La gestion de la ferme passe par l’exécution à intervalle régulier de plusieurs tâches répétitives dites Cron.
Le super Cron (gestion_mutu_super_cron)
Cette tâche, planifiée chaque minute, a pour simple effet d’appeler le Cron de l’ensemble des instances de la mutualisation régulièrement. Couplée avec un Cron système sur le site central de la mutualisation, cela permet de simplement générer des visites régulières sur les différents sites et éviter que les tâches des sites peu visités soient trop (...)

1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | ... | 15

Sur d’autres sites (8257)

ERROR : unsatisfiable constraints : so:libvpx.so.6 (missing)

17 janvier 2021, par Valeed Malik

FFMpeg was updated this week and is causing the build to break.

Are my options to either :

pin ffmpeg to a previous version ? If so, how do I pin to the version before current ?

Update the python dockerfile version

Output :

Step 8/42 : RUN apk add  --no-cache ffmpeg&#xA; ---> Running in 9e46540ed393&#xA;fetch http://dl-cdn.alpinelinux.org/alpine/v3.8/main/x86_64/APKINDEX.tar.gz&#xA;fetch http://dl-cdn.alpinelinux.org/alpine/v3.8/community/x86_64/APKINDEX.tar.gz&#xA;fetch http://dl-8.alpinelinux.org/alpine/edge/community/x86_64/APKINDEX.tar.gz&#xA;ERROR: unsatisfiable constraints:&#xA;  so:libvpx.so.6 (missing):&#xA;    required by:&#xA;                 ffmpeg-libs-4.1.1-r2[so:libvpx.so.6]&#xA;                 ffmpeg-libs-4.1.1-r2[so:libvpx.so.6]&#xA;                 ffmpeg-libs-4.1.1-r2[so:libvpx.so.6]&#xA;                 ffmpeg-libs-4.1.1-r2[so:libvpx.so.6]&#xA;                 ffmpeg-libs-4.1.1-r2[so:libvpx.so.6]&#xA;                 ffmpeg-libs-4.1.1-r2[so:libvpx.so.6]&#xA;                 ffmpeg-libs-4.1.1-r2[so:libvpx.so.6]&#xA;                 ffmpeg-libs-4.1.1-r2[so:libvpx.so.6]&#xA;                 ffmpeg-libs-4.1.1-r2[so:libvpx.so.6]&#xA;                 ffmpeg-libs-4.1.1-r2[so:libvpx.so.6]&#xA;The command &#x27;/bin/sh -c apk add  --no-cache ffmpeg&#x27; returned a non-zero code: 3&#xA;ERROR: Job failed: exit code 3&#xA;FATAL: exit code 3                         &#xA;

Dockerfile :

FROM python:3.6.7-alpine&#xA;&#xA;ENV LANG C.UTF-8&#xA;RUN echo "http://dl-8.alpinelinux.org/alpine/edge/community" >> /etc/apk/repositories&#xA;RUN apk upgrade&#xA;&#xA;&#xA;RUN addgroup -S django &amp;&amp; adduser -S -G django django&#xA;&#xA;RUN apk update&#xA;# FFMPEG/Sox dependencies&#xA;RUN apk add sox&#xA;#RUN apk add  --no-cache libvpx-dev&#xA;RUN apk add  --no-cache ffmpeg&#xA;

How to install dense trajectory without sudoers permission

7 février 2019, par Albe

I’m stuck for a week trying to install iDT(https://github.com/chuckcho/iDT) in a server hosted by university in which I don’t have root permissions. (VERSION=12.04.5 LTS)

I tried to install the 2 main libraries (opencv and ffmpeg) following part(different versions) of this tutorial : http://dridini.blogspot.com/

I managed (I think) to install the libraries in local :

ffmpeg -version

ffmpeg version N-93084-g835ab35 Copyright (c) 2000-2019 the FFmpeg developers

built with gcc 4.6 (Ubuntu/Linaro 4.6.3-1ubuntu5)

configuration: --prefix=/home/XXXXX/ffmpeg_build --extra-cflags=-I/home/XXXXX/ffmpeg_build/include --extra-ldflags=-L/home/XXXXX/ffmpeg_build/lib --bindir=/home/XXXXX/bin --enable-gpl --enable-nonfree --enable-libfdk-aac --enable-libmp3lame --enable-libvorbis --enable-libx264 --enable-pic --enable-shared

libavutil      56. 26.100 / 56. 26.100

libavcodec     58. 46.100 / 58. 46.100

libavformat    58. 26.100 / 58. 26.100

libavdevice    58.  6.101 / 58.  6.101

libavfilter     7. 48.100 /  7. 48.100

libswscale      5.  4.100 /  5.  4.100

libswresample   3.  4.100 /  3.  4.100

libpostproc    55.  4.100 / 55.  4.100 



pkg-config --modversion opencv

2.4.13.5

I exported the LD_LIBRARY_PATH where all .so are.(I cannot perform ldconfig after)
But when I try to make this is the result :

g++ -L/home/chuck/opencv-2.4.11-cuda7.5/lib -L/opt/lib -pipe -Wall -O3 -ggdb -o release/DenseTrackStab  -lopencv_core -lopencv_highgui -lopencv_video -lopencv_imgproc -lopencv_calib3d -lopencv_features2d -lopencv_nonfree -lopencv_ocl -lavformat -lavdevice -lavutil -lavcodec -lswscale

/usr/bin/ld: cannot find -lopencv_core

/usr/bin/ld: cannot find -lopencv_highgui

/usr/bin/ld: cannot find -lopencv_video

/usr/bin/ld: cannot find -lopencv_imgproc

/usr/bin/ld: cannot find -lopencv_calib3d

/usr/bin/ld: cannot find -lopencv_features2d

/usr/bin/ld: cannot find -lopencv_nonfree

/usr/bin/ld: cannot find -lopencv_ocl

/usr/bin/ld: cannot find -lavformat

/usr/bin/ld: cannot find -lavdevice

/usr/bin/ld: cannot find -lavutil

/usr/bin/ld: cannot find -lavcodec

/usr/bin/ld: cannot find -lswscale

collect2: ld returned 1 exit status

make: *** [release/DenseTrackStab] Error 1

I tried to modify the makeFile in order to add there the path or typing make with ldflag ( make "LDFLAGS=-L/$HOME/lib/opencv-2.4.13.5/lib/ -L/$HOME/ffmpeg_build/lib") giving me the same result :

g++ -L/home/XXXXX/opencv-2.4.13.5/release/lib -L/opt/lib -pipe -Wall -O3 -ggdb -o release/DenseTrackStab  -lopencv_core -lopencv_highgui -lopencv_video -lopencv_imgproc -lopencv_calib3d -lopencv_features2d -lopencv_nonfree -lopencv_ocl -lavformat -lavdevice -lavutil -lavcodec -lswscale

/usr/bin/ld: /usr/lib/debug/usr/lib/x86_64-linux-gnu/crt1.o(.debug_info): relocation 0 has invalid symbol index 10

/usr/bin/ld: /usr/lib/debug/usr/lib/x86_64-linux-gnu/crt1.o(.debug_info): relocation 1 has invalid symbol index 11

/usr/bin/ld: /usr/lib/debug/usr/lib/x86_64-linux-gnu/crt1.o(.debug_info): relocation 2 has invalid symbol index 2

/usr/bin/ld: /usr/lib/debug/usr/lib/x86_64-linux-gnu/crt1.o(.debug_info): relocation 3 has invalid symbol index 2

/usr/bin/ld: /usr/lib/debug/usr/lib/x86_64-linux-gnu/crt1.o(.debug_info): relocation 4 has invalid symbol index 10

/usr/bin/ld: /usr/lib/debug/usr/lib/x86_64-linux-gnu/crt1.o(.debug_info): relocation 5 has invalid symbol index 12

/usr/bin/ld: /usr/lib/debug/usr/lib/x86_64-linux-gnu/crt1.o(.debug_info): relocation 6 has invalid symbol index 12

/usr/bin/ld: /usr/lib/debug/usr/lib/x86_64-linux-gnu/crt1.o(.debug_info): relocation 7 has invalid symbol index 12

/usr/bin/ld: /usr/lib/debug/usr/lib/x86_64-linux-gnu/crt1.o(.debug_info): relocation 8 has invalid symbol index 2

/usr/bin/ld: /usr/lib/debug/usr/lib/x86_64-linux-gnu/crt1.o(.debug_info): relocation 9 has invalid symbol index 2

This is the original Makefile

# custom opencv

OPENCV_INC := /home/chuck/opencv-2.4.11-cuda7.5/include

OPENCV_LIB := /home/chuck/opencv-2.4.11-cuda7.5/lib



# set the binaries that have to be built

TARGETS := DenseTrackStab Video



# set the build configuration set 

BUILD := release

#BUILD := debug



# set bin and build dirs

BUILDDIR := .build_$(BUILD)

BINDIR := $(BUILD)



# libraries 

LDLIBS = $(addprefix -l, $(LIBS) $(LIBS_$(notdir $*)))

LIBS := \

    opencv_core opencv_highgui opencv_video opencv_imgproc opencv_calib3d opencv_features2d opencv_nonfree \

    opencv_ocl \

    avformat avdevice avutil avcodec swscale



# set some flags and compiler/linker specific commands

CXXFLAGS = -pipe -D __STDC_CONSTANT_MACROS -D STD=std -Wall $(CXXFLAGS_$(BUILD)) -I. -I$(OPENCV_INC) -I/opt/include

CXXFLAGS_debug := -ggdb

CXXFLAGS_release := -O3 -DNDEBUG -ggdb

LDFLAGS = -L$(OPENCV_LIB) -L/opt/lib -pipe -Wall $(LDFLAGS_$(BUILD))

LDFLAGS_debug := -ggdb

LDFLAGS_release := -O3 -ggdb



include make/generic.mk

Is it possible what I’m trying to do or I must give up ? Any better solution for using this software ?
thank you

How to build dense trajectory without sudoers permission

8 février 2019, par Albe

I’m stuck for a week trying to install iDT(https://github.com/chuckcho/iDT) in a server hosted by university in which I don’t have root permissions. (VERSION=12.04.5 LTS)

I tried to install the 2 main libraries (opencv and ffmpeg) following part(different versions) of this tutorial : http://dridini.blogspot.com/

I managed (I think) to install the libraries in local :

ffmpeg -version

ffmpeg version N-93084-g835ab35 Copyright (c) 2000-2019 the FFmpeg developers

built with gcc 4.6 (Ubuntu/Linaro 4.6.3-1ubuntu5)

configuration: --prefix=/home/XXXXX/ffmpeg_build --extra-cflags=-I/home/XXXXX/ffmpeg_build/include --extra-ldflags=-L/home/XXXXX/ffmpeg_build/lib --bindir=/home/XXXXX/bin --enable-gpl --enable-nonfree --enable-libfdk-aac --enable-libmp3lame --enable-libvorbis --enable-libx264 --enable-pic --enable-shared

libavutil      56. 26.100 / 56. 26.100

libavcodec     58. 46.100 / 58. 46.100

libavformat    58. 26.100 / 58. 26.100

libavdevice    58.  6.101 / 58.  6.101

libavfilter     7. 48.100 /  7. 48.100

libswscale      5.  4.100 /  5.  4.100

libswresample   3.  4.100 /  3.  4.100

libpostproc    55.  4.100 / 55.  4.100 



pkg-config --modversion opencv

2.4.13.5

I exported the LD_LIBRARY_PATH where all .so are.(I cannot perform ldconfig after)
But when I try to make this is the result :

g++ -L/home/chuck/opencv-2.4.11-cuda7.5/lib -L/opt/lib -pipe -Wall -O3 -ggdb -o release/DenseTrackStab  -lopencv_core -lopencv_highgui -lopencv_video -lopencv_imgproc -lopencv_calib3d -lopencv_features2d -lopencv_nonfree -lopencv_ocl -lavformat -lavdevice -lavutil -lavcodec -lswscale

/usr/bin/ld: cannot find -lopencv_core

/usr/bin/ld: cannot find -lopencv_highgui

/usr/bin/ld: cannot find -lopencv_video

/usr/bin/ld: cannot find -lopencv_imgproc

/usr/bin/ld: cannot find -lopencv_calib3d

/usr/bin/ld: cannot find -lopencv_features2d

/usr/bin/ld: cannot find -lopencv_nonfree

/usr/bin/ld: cannot find -lopencv_ocl

/usr/bin/ld: cannot find -lavformat

/usr/bin/ld: cannot find -lavdevice

/usr/bin/ld: cannot find -lavutil

/usr/bin/ld: cannot find -lavcodec

/usr/bin/ld: cannot find -lswscale

collect2: ld returned 1 exit status

make: *** [release/DenseTrackStab] Error 1

I tried to modify the makeFile in order to add there the path or typing make with ldflag ( make "LDFLAGS=-L/$HOME/lib/opencv-2.4.13.5/lib/ -L/$HOME/ffmpeg_build/lib") giving me the same result :

g++ -L/home/XXXXX/opencv-2.4.13.5/release/lib -L/opt/lib -pipe -Wall -O3 -ggdb -o release/DenseTrackStab  -lopencv_core -lopencv_highgui -lopencv_video -lopencv_imgproc -lopencv_calib3d -lopencv_features2d -lopencv_nonfree -lopencv_ocl -lavformat -lavdevice -lavutil -lavcodec -lswscale

/usr/bin/ld: /usr/lib/debug/usr/lib/x86_64-linux-gnu/crt1.o(.debug_info): relocation 0 has invalid symbol index 10

/usr/bin/ld: /usr/lib/debug/usr/lib/x86_64-linux-gnu/crt1.o(.debug_info): relocation 1 has invalid symbol index 11

/usr/bin/ld: /usr/lib/debug/usr/lib/x86_64-linux-gnu/crt1.o(.debug_info): relocation 2 has invalid symbol index 2

/usr/bin/ld: /usr/lib/debug/usr/lib/x86_64-linux-gnu/crt1.o(.debug_info): relocation 3 has invalid symbol index 2

/usr/bin/ld: /usr/lib/debug/usr/lib/x86_64-linux-gnu/crt1.o(.debug_info): relocation 4 has invalid symbol index 10

/usr/bin/ld: /usr/lib/debug/usr/lib/x86_64-linux-gnu/crt1.o(.debug_info): relocation 5 has invalid symbol index 12

/usr/bin/ld: /usr/lib/debug/usr/lib/x86_64-linux-gnu/crt1.o(.debug_info): relocation 6 has invalid symbol index 12

/usr/bin/ld: /usr/lib/debug/usr/lib/x86_64-linux-gnu/crt1.o(.debug_info): relocation 7 has invalid symbol index 12

/usr/bin/ld: /usr/lib/debug/usr/lib/x86_64-linux-gnu/crt1.o(.debug_info): relocation 8 has invalid symbol index 2

/usr/bin/ld: /usr/lib/debug/usr/lib/x86_64-linux-gnu/crt1.o(.debug_info): relocation 9 has invalid symbol index 2

This is the original Makefile

# custom opencv

OPENCV_INC := /home/chuck/opencv-2.4.11-cuda7.5/include

OPENCV_LIB := /home/chuck/opencv-2.4.11-cuda7.5/lib



# set the binaries that have to be built

TARGETS := DenseTrackStab Video



# set the build configuration set 

BUILD := release

#BUILD := debug



# set bin and build dirs

BUILDDIR := .build_$(BUILD)

BINDIR := $(BUILD)



# libraries 

LDLIBS = $(addprefix -l, $(LIBS) $(LIBS_$(notdir $*)))

LIBS := \

    opencv_core opencv_highgui opencv_video opencv_imgproc opencv_calib3d opencv_features2d opencv_nonfree \

    opencv_ocl \

    avformat avdevice avutil avcodec swscale



# set some flags and compiler/linker specific commands

CXXFLAGS = -pipe -D __STDC_CONSTANT_MACROS -D STD=std -Wall $(CXXFLAGS_$(BUILD)) -I. -I$(OPENCV_INC) -I/opt/include

CXXFLAGS_debug := -ggdb

CXXFLAGS_release := -O3 -DNDEBUG -ggdb

LDFLAGS = -L$(OPENCV_LIB) -L/opt/lib -pipe -Wall $(LDFLAGS_$(BUILD))

LDFLAGS_debug := -ggdb

LDFLAGS_release := -O3 -ggdb



include make/generic.mk

Is it possible what I’m trying to do or I must give up ? Any better solution for using this software ?
thank you

1 | ... | 2696 | 2697 | 2698 | 2699 | 2700 | 2701 | 2702 | 2703 | 2704 | ... | 2753

Recherche avancée

Médias (1)

MediaSPIP Simple : futur thème graphique par défaut ?

Autres articles (45)

Les autorisations surchargées par les plugins

Publier sur MédiaSpip

Les tâches Cron régulières de la ferme

Sur d’autres sites (8257)

ERROR : unsatisfiable constraints : so:libvpx.so.6 (missing)

How to install dense trajectory without sudoers permission

How to build dense trajectory without sudoers permission

Se connecter

Navigation

Syndication

Boussole SPIP