Recherche avancée
Médias (1)
-
Rennes Emotion Map 2010-11
19 octobre 2011, par
Mis à jour : Juillet 2013
Langue : français
Type : Texte
Autres articles (63)
-
Gestion des droits de création et d’édition des objets
8 février 2011, parPar défaut, beaucoup de fonctionnalités sont limitées aux administrateurs mais restent configurables indépendamment pour modifier leur statut minimal d’utilisation notamment : la rédaction de contenus sur le site modifiables dans la gestion des templates de formulaires ; l’ajout de notes aux articles ; l’ajout de légendes et d’annotations sur les images ;
-
Dépôt de média et thèmes par FTP
31 mai 2013, parL’outil MédiaSPIP traite aussi les média transférés par la voie FTP. Si vous préférez déposer par cette voie, récupérez les identifiants d’accès vers votre site MédiaSPIP et utilisez votre client FTP favori.
Vous trouverez dès le départ les dossiers suivants dans votre espace FTP : config/ : dossier de configuration du site IMG/ : dossier des média déjà traités et en ligne sur le site local/ : répertoire cache du site web themes/ : les thèmes ou les feuilles de style personnalisées tmp/ : dossier de travail (...) -
Keeping control of your media in your hands
13 avril 2011, parThe vocabulary used on this site and around MediaSPIP in general, aims to avoid reference to Web 2.0 and the companies that profit from media-sharing.
While using MediaSPIP, you are invited to avoid using words like "Brand", "Cloud" and "Market".
MediaSPIP is designed to facilitate the sharing of creative media online, while allowing authors to retain complete control of their work.
MediaSPIP aims to be accessible to as many people as possible and development is based on expanding the (...)
Sur d’autres sites (9281)
-
Which release of ffmpeg is used in the book "Understanding FFmpeg with source code : FFMPEG Fundamentals" ?
28 septembre 2021, par user3344036Just bought the book "Understanding FFmpeg with source code : FFMPEG Fundamentals" from Amazon. I have downloaded ffmpeg release 4.4, but the code has been different from that in the book. Just wondering which release the author was using, can anyone help ?


-
FFMPEG in an AWS Lambda will only output 5 seconds of converted video [duplicate]
5 juin 2021, par beerandsmilesI've been looking for a solution for this issue, but I can't seem to find what's going wrong.


In short, I'm using an AWS Lambda to convert video captured from an raspberry pi in a raw .h264 format to .mp4. The problem is that the output file is always, only 5 seconds long.


So I input a video of say 500mb, that is 10 minutes long, and the output is an mp4 that is exactly the first 5 seconds of the source video.


The lambda has been setup following the tutorial from Amazon that is shown here :
https://aws.amazon.com/blogs/media/processing-user-generated-content-using-aws-lambda-and-ffmpeg/


It is triggered by an upload from one s3 buckets, transcodes, and puts it in a different bucket. The purpose is to store a high quality copy of the video that is smaller to save costs. (this is a personal project, so I'm paying personally)


I've put the full code of the lambda down below.
I had trouble using their recommended stdout method as that resulted in a file being created with a size of 0 bytes.


You'll see a few commented lines where I tried different things to solve it. I thought it best to leave that in while asking the questions so you can see what I've done. Firstly the method of using stdout piped directly into the output S3 did not work, so I stored the output file in lambda's /tmp directory.


However, when I first did this using the signed link as the input it gave me 5 seconds of the input video.


Thinking this had to do with an issue in the stream that FFMPEG was getting, I tried instead to download the file from the first S3 bucket into the temp folder, then convert it, and then upload it.


The actual FFMPEG command is quite simple


f"/opt/bin/ffmpeg -framerate 25 -i {s3_source_key} output.mp4"

But this outputs a 5 second video.


I have also tried using different versions of FFMPEG for the layer with lambda and no help. Also, I have set and execution timeout of 2 minutes with 2gb or ram for this lambda.


The last thing, is that running this command on a linux machine, such as a raspberry pi directly, results in an mp4 of the correct length, only in the lambda am I having this problem.


I'm completely lost, and I can't seem to find any documentation on this happening to anyone else.


import os
import subprocess
import shlex
import boto3
from time import sleep

S3_DESTINATION_BUCKET = "dashcam-duncan"
SIGNED_URL_TIMEOUT = 600

def lambda_handler(event, context):
 print(event)
 os.chdir('/tmp')
 s3_source_bucket = event['Records'][0]['s3']['bucket']['name']
 s3_source_key = event['Records'][0]['s3']['object']['key']

 s3_source_basename = os.path.splitext(os.path.basename(s3_source_key))[0]
 s3_destination_filename = s3_source_basename + ".mp4"

 s3_client = boto3.client('s3')
 s3_source_signed_url = s3_client.generate_presigned_url('get_object',
 Params={'Bucket': s3_source_bucket, 'Key': s3_source_key},
 ExpiresIn=SIGNED_URL_TIMEOUT)
 print(s3_source_signed_url)
 s3_client.download_file(s3_source_bucket,s3_source_key,s3_source_key)
 # ffmpeg_cmd = "/opt/bin/ffmpeg -framerate 25 -i \"" + s3_source_signed_url + "\" output.mp4 "
 ffmpeg_cmd = f"/opt/bin/ffmpeg -framerate 25 -i {s3_source_key} output.mp4 "
 # command1 = shlex.split(ffmpeg_cmd)
 # print(command1)
 os.system(ffmpeg_cmd)
 # os.system('ls')
 # p1 = subprocess.run(command1, stdout=subprocess.PIPE, stderr=subprocess.PIPE)
 file = 'output.mp4'
 resp = s3_client.put_object(Body=open(file,"rb"), Bucket=S3_DESTINATION_BUCKET, Key=s3_destination_filename)
 # resp = s3_client.put_object(Body=p1.stdout, Bucket=S3_DESTINATION_BUCKET, Key=s3_destination_filename)
 s3 = boto3.resource('s3')
 s3.Object(s3_source_bucket,s3_source_key).delete()
 return {
 'statusCode': 200,
 'body': json.dumps('Processing complete successfully')
 }


The cloudwatch logs on the last execution of this :


built with gcc 8 (Debian 8.3.0-6)
configuration: --enable-gpl --enable-version3 --enable-static --disable-debug --disable-ffplay --disable-indev=sndio --disable-outdev=sndio --cc=gcc --enable-fontconfig --enable-frei0r --enable-gnutls --enable-gmp --enable-libgme --enable-gray --enable-libaom --enable-libfribidi --enable-libass --enable-libvmaf --enable-libfreetype --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-librubberband --enable-libsoxr --enable-libspeex --enable-libsrt --enable-libvorbis --enable-libopus --enable-libtheora --enable-libvidstab --enable-libvo-amrwbenc --enable-libvpx --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxml2 --enable-libdav1d --enable-libxvid --enable-libzvbi --enable-libzimg
libavutil 56. 70.100 / 56. 70.100
libavcodec 58.134.100 / 58.134.100
libavformat 58. 76.100 / 58. 76.100
libavdevice 58. 13.100 / 58. 13.100
libavfilter 7.110.100 / 7.110.100
libswscale 5. 9.100 / 5. 9.100
libswresample 3. 9.100 / 3. 9.100
libpostproc 55. 9.100 / 55. 9.100
Input #0, h264, from 'video00087.h264':
Duration: N/A, bitrate: N/A
Stream #0:0: Video: h264 (High), yuv420p(progressive), 1280x720, 25 fps, 25 tbr, 1200k tbn, 50 tbc
Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (libx264))
Press [q] to stop, [?] for help
[libx264 @ 0x6aaf500] using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2 AVX FMA3 BMI2 AVX2
[libx264 @ 0x6aaf500] profile High, level 3.1, 4:2:0, 8-bit
[libx264 @ 0x6aaf500] 264 - core 161 r3048 b86ae3c - H.264/MPEG-4 AVC codec - Copyleft 2003-2021 - http://www.videolan.org/x264.html - options: cabac=1 ref=3 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=7 psy=1 psy_rd=1.00:0.00 mixed_ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=-2 threads=3 lookahead_threads=1 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2 b_adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=25 scenecut=40 intra_refresh=0 rc_lookahead=40 rc=crf mbtree=1 crf=23.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00
Output #0, mp4, to 'output.mp4':
Metadata:
encoder : Lavf58.76.100
Stream #0:0: Video: h264 (avc1 / 0x31637661), yuv420p(progressive), 1280x720, q=2-31, 25 fps, 12800 tbn
Metadata:
encoder : Lavc58.134.100 libx264
Side data:
cpb: bitrate max/min/avg: 0/0/0 buffer size: 0 vbv_delay: N/A
frame= 1 fps=0.0 q=0.0 size= 0kB time=00:00:00.00 bitrate=N/A speed= 0x 
frame= 47 fps=0.0 q=0.0 size= 0kB time=00:00:00.00 bitrate=N/A speed= 0x 
frame= 56 fps= 44 q=28.0 size= 0kB time=00:00:00.24 bitrate= 1.6kbits/s speed=0.187x 
frame= 65 fps= 35 q=28.0 size= 0kB time=00:00:00.60 bitrate= 0.6kbits/s speed=0.325x 
frame= 74 fps= 31 q=28.0 size= 0kB time=00:00:00.96 bitrate= 0.4kbits/s speed=0.399x 
Enter command: <target>|all <time>|-1 <command>[ <argument>]
Parse error, at least 3 arguments were expected, only 1 given in string 'V����Ҿ�#I���bv��oF��LxE��{��y5Jx�X�-f?2k�E~ہ��L��Y?�w���9?S�?�(q?��y��V8�=)�9'�?�-j?��?�3���Ŧ$��r���\��r}?zb?E��?��B}b4��2��[z�&�逋�Qk�ar�=y���'
frame= 82 fps= 28 q=28.0 size= 256kB time=00:00:01.28 bitrate=1638.6kbits/s speed=0.434x 
frame= 90 fps= 25 q=28.0 size= 256kB time=00:00:01.60 bitrate=1310.9kbits/s speed=0.442x 
frame= 98 fps= 23 q=28.0 size= 256kB time=00:00:01.92 bitrate=1092.4kbits/s speed=0.458x 
frame= 107 fps= 23 q=28.0 size= 256kB time=00:00:02.28 bitrate= 919.9kbits/s speed=0.48x 
frame= 115 fps= 22 q=28.0 size= 512kB time=00:00:02.60 bitrate=1613.3kbits/s speed=0.495x 
frame= 122 fps= 21 q=28.0 size= 512kB time=00:00:02.88 bitrate=1456.4kbits/s speed=0.499x 
[h264 @ 0x6b68c80] left block unavailable for requested intra mode
[h264 @ 0x6b68c80] error while decoding MB 0 19, bytestream 37403
[h264 @ 0x6b68c80] concealing 2129 DC, 2129 AC, 2129 MV errors in P frame
video00087.h264: corrupt decoded frame in stream 0
[h264 @ 0x6ab4080] left block unavailable for requested intra4x4 mode -1
[h264 @ 0x6ab4080] error while decoding MB 0 37, bytestream 13222
[h264 @ 0x6ab4080] concealing 689 DC, 689 AC, 689 MV errors in P frame
video00087.h264: corrupt decoded frame in stream 0
[h264 @ 0x6b68c80] concealing 1347 DC, 1347 AC, 1347 MV errors in P frame
frame= 130 fps= 21 q=28.0 size= 512kB time=00:00:03.20 bitrate=1310.8kbits/s speed=0.509x 
video00087.h264: corrupt decoded frame in stream 0
frame= 131 fps= 15 q=-1.0 Lsize= 1081kB time=00:00:05.12 bitrate=1729.6kbits/s speed=0.575x 
video:1079kB audio:0kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: 0.220914%
[libx264 @ 0x6aaf500] frame I:1 Avg QP:21.61 size: 37761
[libx264 @ 0x6aaf500] frame P:34 Avg QP:22.25 size: 18066
[libx264 @ 0x6aaf500] frame B:96 Avg QP:24.46 size: 4706
[libx264 @ 0x6aaf500] consecutive B-frames: 2.3% 0.0% 0.0% 97.7%
[libx264 @ 0x6aaf500] mb I I16..4: 15.2% 61.2% 23.6%
[libx264 @ 0x6aaf500] mb P I16..4: 8.4% 15.6% 1.2% P16..4: 39.2% 13.7% 6.9% 0.0% 0.0% skip:15.0%
[libx264 @ 0x6aaf500] mb B I16..4: 0.7% 1.8% 0.0% B16..8: 44.5% 4.5% 0.5% direct: 3.6% skip:44.4% L0:46.9% L1:48.0% BI: 5.1%
[libx264 @ 0x6aaf500] 8x8 transform intra:63.5% inter:83.1%
[libx264 @ 0x6aaf500] coded y,uvDC,uvAC intra: 22.1% 25.4% 2.8% inter: 11.6% 19.3% 1.2%
[libx264 @ 0x6aaf500] i16 v,h,dc,p: 4% 63% 8% 25%
[libx264 @ 0x6aaf500] i8 v,h,dc,ddl,ddr,vr,hd,vl,hu: 9% 26% 53% 1% 2% 1% 3% 1% 3%
[libx264 @ 0x6aaf500] i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 16% 44% 16% 4% 4% 3% 5% 4% 4%
[libx264 @ 0x6aaf500] i8c dc,h,v,p: 66% 24% 9% 1%
[libx264 @ 0x6aaf500] Weighted P-Frames: Y:0.0% UV:0.0%
[libx264 @ 0x6aaf500] ref P L0: 57.5% 16.8% 18.2% 7.5%
[libx264 @ 0x6aaf500] ref B L0: 89.8% 8.0% 2.2%
[libx264 @ 0x6aaf500] ref B L1: 96.0% 4.0%
[libx264 @ 0x6aaf500] kb/s:1685.21
END RequestId: 96e1031a-b1a2-4480-a59d-68de487671bd
REPORT RequestId: 96e1031a-b1a2-4480-a59d-68de487671bd Duration: 11721.77 ms Billed Duration: 11722 ms Memory Size: 2048 MB Max Memory Used: 494 MB Init Duration: 353.14 ms
</argument></command></time></target>

I've been struggling with this for a couple days now, any help would be amazing.


-
Carrierwave video not being processsed before uploading to S3
12 décembre 2013, par CrampsI'm using Carrierwave, Carrierwave-video and Carrierwave-video-thumbnailer to process videos and make a thumbnail when they're uploaded. This was all working nicely while I was saving the files on my file system. However, now that I've added uploading to Amazon S3 using the carrierwave-aws gem, the videos are being uploaded to S3 without being processed first. It's as if the
process encode_videoandversion :thumbare being skipped by the uploader.Here's what was working for me at first (before adding S3) :
class VideoUploader < CarrierWave::Uploader::Base
include CarrierWave::Video
include CarrierWave::Video::Thumbnailer
storage :file
def store_dir
"upload/path/"
end
process encode_video: [{ bunch of video options}]
version :thumb do
process thumbnail: [{ bunch of thumbnailer options }]
def full_filename for_file
png_name for_file, version_name
end
end
def png_name for_file, version_name
%Q{#{version_name}_#{for_file.chomp(File.extname(for_file))}.png}
endNow it's really just the same, except it's using
storage :awsinstead.
Syndiquer tout le site
