
Recherche avancée
Autres articles (101)
-
MediaSPIP 0.1 Beta version
25 avril 2011, parMediaSPIP 0.1 beta is the first version of MediaSPIP proclaimed as "usable".
The zip file provided here only contains the sources of MediaSPIP in its standalone version.
To get a working installation, you must manually install all-software dependencies on the server.
If you want to use this archive for an installation in "farm mode", you will also need to proceed to other manual (...) -
Les tâches Cron régulières de la ferme
1er décembre 2010, parLa gestion de la ferme passe par l’exécution à intervalle régulier de plusieurs tâches répétitives dites Cron.
Le super Cron (gestion_mutu_super_cron)
Cette tâche, planifiée chaque minute, a pour simple effet d’appeler le Cron de l’ensemble des instances de la mutualisation régulièrement. Couplée avec un Cron système sur le site central de la mutualisation, cela permet de simplement générer des visites régulières sur les différents sites et éviter que les tâches des sites peu visités soient trop (...) -
Emballe Médias : Mettre en ligne simplement des documents
29 octobre 2010, parLe plugin emballe médias a été développé principalement pour la distribution mediaSPIP mais est également utilisé dans d’autres projets proches comme géodiversité par exemple. Plugins nécessaires et compatibles
Pour fonctionner ce plugin nécessite que d’autres plugins soient installés : CFG Saisies SPIP Bonux Diogène swfupload jqueryui
D’autres plugins peuvent être utilisés en complément afin d’améliorer ses capacités : Ancres douces Légendes photo_infos spipmotion (...)
Sur d’autres sites (11616)
-
ffmpeg could not find codec parameters for stream 0 on Ubuntu 22.04, works fine on Ubuntu 18.04
22 février 2023, par ngmI'm new to ffmpeg but I've got an odd issue which seems to arise from using it on different Ubuntu versions.


I have an NVIDIA Jetson Nano running Ubuntu 18.04.5 LTS (GNU/Linux 4.9.201-tegra aarch64). Plugged into the Nano's carrier board is an embedded camera that shows up as a
Sunplus Innovation Technology Inc. USB2.0 Camera RGB
when I runlsusb
.

When I run this ffmpeg command, I can successfully record video from the camera, which seems to be
mjpeg
codec withyuvj422p
pixel format. The output is as follows :

ffmpeg -f video4linux2 -i /dev/video0 -an -vcodec libx264 test_capture.mp4
ffmpeg version 3.4.8-0ubuntu0.2 Copyright (c) 2000-2020 the FFmpeg developers
 built with gcc 7 (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04)
 configuration: --prefix=/usr --extra-version=0ubuntu0.2 --toolchain=hardened --libdir=/usr/lib/aarch64-linux-gnu --incdir=/usr/include/aarch64-linux-gnu --enable-gpl --disable-stripping --enable-avresample --enable-avisynth --enable-gnutls --enable-ladspa --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libflite --enable-libfontconfig --enable-libfreetype --enable-libfribidi --enable-libgme --enable-libgsm --enable-libmp3lame --enable-libmysofa --enable-libopenjpeg --enable-libopenmpt --enable-libopus --enable-libpulse --enable-librubberband --enable-librsvg --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libssh --enable-libtheora --enable-libtwolame --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq --enable-libzvbi --enable-omx --enable-openal --enable-opengl --enable-sdl2 --enable-libdc1394 --enable-libdrm --enable-libiec61883 --enable-chromaprint --enable-frei0r --enable-libopencv --enable-libx264 --enable-shared
 libavutil 55. 78.100 / 55. 78.100
 libavcodec 57.107.100 / 57.107.100
 libavformat 57. 83.100 / 57. 83.100
 libavdevice 57. 10.100 / 57. 10.100
 libavfilter 6.107.100 / 6.107.100
 libavresample 3. 7. 0 / 3. 7. 0
 libswscale 4. 8.100 / 4. 8.100
 libswresample 2. 9.100 / 2. 9.100
 libpostproc 54. 7.100 / 54. 7.100
Input #0, video4linux2,v4l2, from '/dev/video0':
 Duration: N/A, start: 166.142773, bitrate: N/A
 Stream #0:0: Video: mjpeg, yuvj422p(pc, bt470bg/unknown/unknown), 928x400, 100 fps, 100 tbr, 1000k tbn, 1000k tbc
Stream mapping:
 Stream #0:0 -> #0:0 (mjpeg (native) -> h264 (libx264))
Press [q] to stop, [?] for help
[libx264 @ 0x558553df70] using cpu capabilities: ARMv8 NEON
[libx264 @ 0x558553df70] profile High 4:2:2, level 3.2, 4:2:2 8-bit
[libx264 @ 0x558553df70] 264 - core 152 r2854 e9a5903 - H.264/MPEG-4 AVC codec - Copyleft 2003-2017 - http://www.videolan.org/x264.html - options: cabac=1 ref=3 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=7 psy=1 psy_rd=1.00:0.00 mixed_ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=-2 threads=6 lookahead_threads=1 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2 b_adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=25 scenecut=40 intra_refresh=0 rc_lookahead=40 rc=crf mbtree=1 crf=23.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00
Output #0, mp4, to 'test_capture.mp4':
 Metadata:
 encoder : Lavf57.83.100
 Stream #0:0: Video: h264 (libx264) (avc1 / 0x31637661), yuvj422p(pc), 928x400, q=-1--1, 100 fps, 12800 tbn, 100 tbc
 Metadata:
 encoder : Lavc57.107.100 libx264
 Side data:
 cpb: bitrate max/min/avg: 0/0/0 buffer size: 0 vbv_delay: -1
frame= 192 fps= 65 q=-1.0 Lsize= 151kB time=00:00:01.89 bitrate= 654.4kbits/s dup=150 drop=0 speed=0.642x 
video:148kB audio:0kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: 2.072495%
[libx264 @ 0x558553df70] frame I:1 Avg QP:23.62 size: 36953
[libx264 @ 0x558553df70] frame P:49 Avg QP:25.25 size: 2121
[libx264 @ 0x558553df70] frame B:142 Avg QP:30.55 size: 70
[libx264 @ 0x558553df70] consecutive B-frames: 1.0% 1.0% 0.0% 97.9%
[libx264 @ 0x558553df70] mb I I16..4: 10.1% 78.8% 11.1%
[libx264 @ 0x558553df70] mb P I16..4: 1.1% 1.9% 0.0% P16..4: 19.1% 3.0% 2.0% 0.0% 0.0% skip:72.8%
[libx264 @ 0x558553df70] mb B I16..4: 0.0% 0.0% 0.0% B16..8: 2.7% 0.0% 0.0% direct: 0.1% skip:97.2% L0:36.8% L1:62.3% BI: 0.9%
[libx264 @ 0x558553df70] 8x8 transform intra:68.4% inter:77.4%
[libx264 @ 0x558553df70] coded y,uvDC,uvAC intra: 42.0% 80.2% 41.3% inter: 2.2% 5.4% 0.2%
[libx264 @ 0x558553df70] i16 v,h,dc,p: 50% 17% 10% 23%
[libx264 @ 0x558553df70] i8 v,h,dc,ddl,ddr,vr,hd,vl,hu: 21% 9% 32% 5% 7% 7% 5% 8% 5%
[libx264 @ 0x558553df70] i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 24% 15% 12% 5% 14% 11% 8% 5% 7%
[libx264 @ 0x558553df70] i8c dc,h,v,p: 50% 12% 26% 12%
[libx264 @ 0x558553df70] Weighted P-Frames: Y:28.6% UV:28.6%
[libx264 @ 0x558553df70] ref P L0: 56.4% 28.2% 12.0% 2.5% 0.9%
[libx264 @ 0x558553df70] ref B L0: 93.4% 5.3% 1.3%
[libx264 @ 0x558553df70] ref B L1: 94.9% 5.1%
[libx264 @ 0x558553df70] kb/s:628.21
Exiting normally, received signal 2.



However, I'd like to replace this Nano with another that I've upgraded to Ubuntu 22.04.1 LTS (GNU/Linux 4.9.299-tegra aarch64). The device still shows up as the same type when running
lsusb
. Running the exact same command results in the following :

ffmpeg -f video4linux2 -i /dev/video0 -an -vcodec libx264 test_capture.mp4
ffmpeg version 4.4.2-0ubuntu0.22.04.1 Copyright (c) 2000-2021 the FFmpeg developers
 built with gcc 11 (Ubuntu 11.2.0-19ubuntu1)
 configuration: --prefix=/usr --extra-version=0ubuntu0.22.04.1 --toolchain=hardened --libdir=/usr/lib/aarch64-linux-gnu --incdir=/usr/include/aarch64-linux-gnu --arch=arm64 --enable-gpl --disable-stripping --enable-gnutls --enable-ladspa --enable-libaom --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libcodec2 --enable-libdav1d --enable-libflite --enable-libfontconfig --enable-libfreetype --enable-libfribidi --enable-libgme --enable-libgsm --enable-libjack --enable-libmp3lame --enable-libmysofa --enable-libopenjpeg --enable-libopenmpt --enable-libopus --enable-libpulse --enable-librabbitmq --enable-librubberband --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libsrt --enable-libssh --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvorbis --enable-libvpx --enable-libwebp --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzimg --enable-libzmq --enable-libzvbi --enable-lv2 --enable-omx --enable-openal --enable-opencl --enable-opengl --enable-sdl2 --enable-pocketsphinx --enable-librsvg --enable-libdc1394 --enable-libdrm --enable-libiec61883 --enable-chromaprint --enable-frei0r --enable-libx264 --enable-shared
 libavutil 56. 70.100 / 56. 70.100
 libavcodec 58.134.100 / 58.134.100
 libavformat 58. 76.100 / 58. 76.100
 libavdevice 58. 13.100 / 58. 13.100
 libavfilter 7.110.100 / 7.110.100
 libswscale 5. 9.100 / 5. 9.100
 libswresample 3. 9.100 / 3. 9.100
 libpostproc 55. 9.100 / 55. 9.100
[video4linux2,v4l2 @ 0x55cab86450] Could not find codec parameters for stream 0 (Video: mjpeg, none(bt470bg/unknown/unknown), 1856x800): unspecified pixel format
Consider increasing the value for the 'analyzeduration' (0) and 'probesize' (5000000) options
Input #0, video4linux2,v4l2, from '/dev/video0':
 Duration: N/A, bitrate: N/A
 Stream #0:0: Video: mjpeg, none(bt470bg/unknown/unknown), 1856x800, 60 fps, 60 tbr, 1000k tbn, 1000k tbc
Stream mapping:
 Stream #0:0 -> #0:0 (mjpeg (native) -> h264 (libx264))
Press [q] to stop, [?] for help
Cannot determine format of input stream 0:0 after EOF
Error marking filters as finished
Exiting normally, received signal 2.



I'm not sure why I can't read this video stream when everything seems to be the same but the OS and the ffmpeg version.


I've checked the available codecs and pixel formats using
ffmpeg -codecs
andffmpeg -pix_fmts
:

Ubuntu 18.04.5, ffmpeg version 3.4.8-0ubuntu0.2 :


DEVIL. mjpeg Motion JPEG (encoders: mjpeg mjpeg_vaapi )


IO... yuvj422p 3 16


Ubuntu 22.04.1, ffmpeg version 4.4.2-0ubuntu0.22.04.1 :


DEVIL. mjpeg Motion JPEG (decoders: mjpeg mjpeg_cuvid ) (encoders: mjpeg mjpeg_vaapi )


IO... yuvj422p 3 16


So it seems like I should be able to record video on both with this codec/pixel format combination.


I've also tried forcing ffmpeg to use this combination on the 22.04 Nano with the following command :


ffmpeg -f v4l2 -input_format mjpeg -framerate 100 -video_size 928x400 -pix_fmt yuvj422p -i /dev/video0 -an -vcodec libx264 test_capture.mp4


But I get the same error. I've also tried increasing the
-analyzeduration
and-probesize
arguments to 100M, with no luck.

Are there other commands or settings I should use ? Should I downgrade my ffmpeg version if possible ?


-
Matomo’s privacy-friendly web analytics software named best of the year 2022
25 janvier 2023, par Erin -
VideoWriter Doesn't work using openCV, ubuntu, Qt
25 janvier 2023, par underflow223My code :


cv::VideoWriter(
 strFile.toStdString(),
 cv::VideoWriter::fourcc('m','p','4','v'),
 nfps,
 cv::Size(1920/nresize, 1080/nresize)
);



Error message :


[mpeg4_v4l2m2m @ 0x7f50a43c50] arm_release_ver of this libmali is 'g6p0-01eac0', rk_so_ver is '7'.
Could not find a valid device
[mpeg4_v4l2m2m @ 0x7f50a43c50] can't configure encoder



If I use MJPG codec, it works fine thow.


This is OPENCV configure info :


-- General configuration for OpenCV 4.6.0 =====================================
-- Version control: unknown
-- 
-- Extra modules:
-- Location (extra): /home/firefly/Downloads/opencv_contrib-4.6.0/modules
-- Version control (extra): unknown
-- 
-- Platform:
-- Timestamp: 2023-01-19T02:11:26Z
-- Host: Linux 5.10.110 aarch64
-- CMake: 3.16.3
-- CMake generator: Unix Makefiles
-- CMake build tool: /usr/bin/make
-- Configuration: Release
-- 
-- CPU/HW features:
-- Baseline: NEON FP16
-- 
-- C/C++:
-- Built as dynamic libs?: YES
-- C++ standard: 11
-- C++ Compiler: /usr/bin/c++ (ver 9.4.0)
-- C++ flags (Release): -fsigned-char -W -Wall -Wreturn-type -Wnon-virtual-dtor -Waddress -Wsequence-point -Wformat -Wformat-security -Wmissing-declarations -Wundef -Winit-self -Wpointer-arith -Wshadow -Wsign-promo -Wuninitialized -Wsuggest-override -Wno-delete-non-virtual-dtor -Wno-comment -Wimplicit-fallthrough=3 -Wno-strict-overflow -fdiagnostics-show-option -pthread -fomit-frame-pointer -ffunction-sections -fdata-sections -fvisibility=hidden -fvisibility-inlines-hidden -O3 -DNDEBUG -DNDEBUG
-- C++ flags (Debug): -fsigned-char -W -Wall -Wreturn-type -Wnon-virtual-dtor -Waddress -Wsequence-point -Wformat -Wformat-security -Wmissing-declarations -Wundef -Winit-self -Wpointer-arith -Wshadow -Wsign-promo -Wuninitialized -Wsuggest-override -Wno-delete-non-virtual-dtor -Wno-comment -Wimplicit-fallthrough=3 -Wno-strict-overflow -fdiagnostics-show-option -pthread -fomit-frame-pointer -ffunction-sections -fdata-sections -fvisibility=hidden -fvisibility-inlines-hidden -g -O0 -DDEBUG -D_DEBUG
-- C Compiler: /usr/bin/cc
-- C flags (Release): -fsigned-char -W -Wall -Wreturn-type -Waddress -Wsequence-point -Wformat -Wformat-security -Wmissing-declarations -Wmissing-prototypes -Wstrict-prototypes -Wundef -Winit-self -Wpointer-arith -Wshadow -Wuninitialized -Wno-comment -Wimplicit-fallthrough=3 -Wno-strict-overflow -fdiagnostics-show-option -pthread -fomit-frame-pointer -ffunction-sections -fdata-sections -fvisibility=hidden -O3 -DNDEBUG -DNDEBUG
-- C flags (Debug): -fsigned-char -W -Wall -Wreturn-type -Waddress -Wsequence-point -Wformat -Wformat-security -Wmissing-declarations -Wmissing-prototypes -Wstrict-prototypes -Wundef -Winit-self -Wpointer-arith -Wshadow -Wuninitialized -Wno-comment -Wimplicit-fallthrough=3 -Wno-strict-overflow -fdiagnostics-show-option -pthread -fomit-frame-pointer -ffunction-sections -fdata-sections -fvisibility=hidden -g -O0 -DDEBUG -D_DEBUG
-- Linker flags (Release): -Wl,--gc-sections -Wl,--as-needed -Wl,--no-undefined 
-- Linker flags (Debug): -Wl,--gc-sections -Wl,--as-needed -Wl,--no-undefined 
-- ccache: NO
-- Precompiled headers: NO
-- Extra dependencies: dl m pthread rt
-- 3rdparty dependencies:
-- 
-- OpenCV modules:
-- To be built: aruco barcode bgsegm bioinspired calib3d ccalib core datasets dnn dnn_objdetect dnn_superres dpm face features2d flann freetype fuzzy gapi hfs highgui img_hash imgcodecs imgproc intensity_transform line_descriptor mcc ml objdetect optflow phase_unwrapping photo plot quality rapid reg rgbd saliency shape stereo stitching structured_light superres surface_matching text tracking ts video videoio videostab wechat_qrcode xfeatures2d ximgproc xobjdetect xphoto
-- Disabled: world
-- Disabled by dependency: -
-- Unavailable: alphamat cudaarithm cudabgsegm cudacodec cudafeatures2d cudafilters cudaimgproc cudalegacy cudaobjdetect cudaoptflow cudastereo cudawarping cudev cvv hdf java julia matlab ovis python2 python3 sfm viz
-- Applications: tests perf_tests apps
-- Documentation: NO
-- Non-free algorithms: NO
-- 
-- GUI: GTK3
-- GTK+: YES (ver 3.24.20)
-- GThread : YES (ver 2.64.6)
-- GtkGlExt: NO
-- VTK support: NO
-- 
-- Media I/O: 
-- ZLib: /usr/lib/aarch64-linux-gnu/libz.so (ver 1.2.11)
-- JPEG: /usr/lib/aarch64-linux-gnu/libjpeg.so (ver 80)
-- WEBP: build (ver encoder: 0x020f)
-- PNG: /usr/lib/aarch64-linux-gnu/libpng.so (ver 1.6.37)
-- TIFF: /usr/lib/aarch64-linux-gnu/libtiff.so (ver 42 / 4.1.0)
-- JPEG 2000: build (ver 2.4.0)
-- OpenEXR: build (ver 2.3.0)
-- HDR: YES
-- SUNRASTER: YES
-- PXM: YES
-- PFM: YES
-- 
-- Video I/O:
-- DC1394: YES (2.2.5)
-- FFMPEG: YES
-- avcodec: YES (58.54.100)
-- avformat: YES (58.29.100)
-- avutil: YES (56.31.100)
-- swscale: YES (5.5.100)
-- avresample: YES (4.0.0)
-- GStreamer: YES (1.16.2)
-- v4l/v4l2: YES (linux/videodev2.h)
-- 
-- Parallel framework: pthreads
-- 
-- Trace: YES (with Intel ITT)
-- 
-- Other third-party libraries:
-- Lapack: NO
-- Eigen: NO
-- Custom HAL: YES (carotene (ver 0.0.1))
-- Protobuf: build (3.19.1)
-- 
-- OpenCL: YES (no extra features)
-- Include path: /home/firefly/Downloads/opencv-4.6.0/3rdparty/include/opencl/1.2
-- Link libraries: Dynamic load
-- 
-- Python (for build): /usr/bin/python2.7
-- 
-- Java: 
-- ant: NO
-- JNI: NO
-- Java wrappers: NO
-- Java tests: NO
-- 
============================================================================================



ffmpeg info :


============================================================================================
ffmpeg
ffmpeg version 4.2.4-1ubuntu1.0firefly5 Copyright (c) 2000-2020 the FFmpeg developers
 built with gcc 9 (Ubuntu 9.4.0-1ubuntu1~20.04.1)
 configuration: --prefix=/usr --extra-version=1ubuntu1.0firefly5 --toolchain=hardened --libdir=/usr/lib/aarch64-linux-gnu --incdir=/usr/include/aarch64-linux-gnu --arch=arm64 --enable-gpl --disable-stripping --enable-avresample --disable-filter=resample --enable-avisynth --enable-gnutls --enable-ladspa --enable-libaom --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libcodec2 --enable-libflite --enable-libfontconfig --enable-libfreetype --enable-libfribidi --enable-libgme --enable-libgsm --enable-libjack --enable-libmp3lame --enable-libmysofa --enable-libopenjpeg --enable-libopenmpt --enable-libopus --enable-libpulse --enable-librsvg --enable-librubberband --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libssh --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq --enable-libzvbi --enable-lv2 --enable-omx --enable-openal --enable-opencl --enable-opengl --enable-sdl2 --enable-libdc1394 --enable-libdrm --enable-libiec61883 --enable-chromaprint --enable-frei0r --enable-libx264 --enable-libdrm --enable-librga --enable-rkmpp --enable-version3 --disable-libopenh264 --disable-vaapi --disable-vdpau --disable-decoder=h264_v4l2m2m --disable-decoder=vp8_v4l2m2m --disable-decoder=mpeg2_v4l2m2m --disable-decoder=mpeg4_v4l2m2m --enable-shared --disable-doc
 libavutil 56. 31.100 / 56. 31.100
 libavcodec 58. 54.100 / 58. 54.100
 libavformat 58. 29.100 / 58. 29.100
 libavdevice 58. 8.100 / 58. 8.100
 libavfilter 7. 57.100 / 7. 57.100
 libavresample 4. 0. 0 / 4. 0. 0
 libswscale 5. 5.100 / 5. 5.100
 libswresample 3. 5.100 / 3. 5.100
 libpostproc 55. 5.100 / 55. 5.100
Hyper fast Audio and Video encoder
usage: ffmpeg [options] [[infile options] -i infile]... {[outfile options] outfile}...
====================================================================================