Recherche avancée

Sur d’autres sites (10977)

• PyQt6 6.7.0 - How to fix error : No QtMultimedia backends found

  4 février, par Belleroph0N

  Problem on Windows 10 and Windows 11 using Anaconda.

  


  Here is the full error message for PyQt6=6.7.0 :

  


  No QtMultimedia backends found. Only QMediaDevices, QAudioDevice, QSoundEffect, QAudioSink, and QAudioSource are available.
Failed to initialize QMediaPlayer "Not available"
Failed to create QVideoSink "Not available"


  


  Installed PyQt6 using a requirements file :

  


  PyQt6
PyQt6-WebEngine
requests
pyserial
pynput


  


  Here are a couple things I tried :

  


  

  1. Reroll version back to PyQt6=6.6.1. This results in an error as well : ImportError : DLL load failed while importing QtGui : The specified procedure could not be found.

  


  2. I thought that missing ffmpeg might be the issue so I installed it, but the issue persists.

  


  3. Tried the setup on Ubuntu (WSL2) and the issue disappears, but there is just a black screen and nothing gets displayed in the widget. (EDIT : Got this up and running, the problem was with differences in file paths in linux vs windows.)

  


  


  I am new to PyQt so any pointers will be helpful !

  


  Edit : Here is generic code (taken from here) that gives the same error :

  


  from PyQt6.QtGui import QIcon, QFont
from PyQt6.QtCore import QDir, Qt, QUrl, QSize
from PyQt6.QtMultimedia import QMediaPlayer
from PyQt6.QtMultimediaWidgets import QVideoWidget
from PyQt6.QtWidgets import (QApplication, QFileDialog, QHBoxLayout, QLabel, QStyleFactory,
        QPushButton, QSizePolicy, QSlider, QStyle, QVBoxLayout, QWidget, QStatusBar)


class VideoPlayer(QWidget):

    def __init__(self, parent=None):
        super(VideoPlayer, self).__init__(parent)

        self.mediaPlayer = QMediaPlayer()

        btnSize = QSize(16, 16)
        videoWidget = QVideoWidget()

        openButton = QPushButton("Open Video")   
        openButton.setToolTip("Open Video File")
        openButton.setStatusTip("Open Video File")
        openButton.setFixedHeight(24)
        openButton.setIconSize(btnSize)
        openButton.setFont(QFont("Noto Sans", 8))
        openButton.setIcon(QIcon.fromTheme("document-open", QIcon("D:/_Qt/img/open.png")))
        openButton.clicked.connect(self.abrir)

        self.playButton = QPushButton()
        self.playButton.setEnabled(False)
        self.playButton.setFixedHeight(24)
        self.playButton.setIconSize(btnSize)
        self.playButton.setIcon(self.style().standardIcon(QStyle.StandardPixmap.SP_MediaPlay))
        self.playButton.clicked.connect(self.play)

        self.positionSlider = QSlider(Qt.Orientation.Horizontal)
        self.positionSlider.setRange(0, 0)
        self.positionSlider.sliderMoved.connect(self.setPosition)

        self.statusBar = QStatusBar()
        self.statusBar.setFont(QFont("Noto Sans", 7))
        self.statusBar.setFixedHeight(14)

        controlLayout = QHBoxLayout()
        controlLayout.setContentsMargins(0, 0, 0, 0)
        controlLayout.addWidget(openButton)
        controlLayout.addWidget(self.playButton)
        controlLayout.addWidget(self.positionSlider)

        layout = QVBoxLayout()
        layout.addWidget(videoWidget)
        layout.addLayout(controlLayout)
        layout.addWidget(self.statusBar)

        self.setLayout(layout)

        #help(self.mediaPlayer)
        self.mediaPlayer.setVideoOutput(videoWidget)
        self.mediaPlayer.playbackStateChanged.connect(self.mediaStateChanged)
        self.mediaPlayer.positionChanged.connect(self.positionChanged)
        self.mediaPlayer.durationChanged.connect(self.durationChanged)
        self.mediaPlayer.errorChanged.connect(self.handleError)
        self.statusBar.showMessage("Ready")

    def abrir(self):
        fileName, _ = QFileDialog.getOpenFileName(self, "Select Media",
                ".", "Video Files (*.mp4 *.flv *.ts *.mts *.avi)")

        if fileName != '':
            self.mediaPlayer.setSource(QUrl.fromLocalFile(fileName))
            self.playButton.setEnabled(True)
            self.statusBar.showMessage(fileName)
            self.play()

    def play(self):
        if self.mediaPlayer.playbackState() == QMediaPlayer.PlaybackState.PlayingState:
            self.mediaPlayer.pause()
        else:
            self.mediaPlayer.play()

    def mediaStateChanged(self, state):
        if self.mediaPlayer.playbackState() == QMediaPlayer.PlaybackState.PlayingState:
            self.playButton.setIcon(
                    self.style().standardIcon(QStyle.StandardPixmap.SP_MediaPause))
        else:
            self.playButton.setIcon(
                    self.style().standardIcon(QStyle.StandardPixmap.SP_MediaPlay))

    def positionChanged(self, position):
        self.positionSlider.setValue(position)

    def durationChanged(self, duration):
        self.positionSlider.setRange(0, duration)

    def setPosition(self, position):
        self.mediaPlayer.setPosition(position)

    def handleError(self):
        self.playButton.setEnabled(False)
        self.statusBar.showMessage("Error: " + self.mediaPlayer.errorString())

if __name__ == '__main__':
    import sys
    app = QApplication(sys.argv)
    player = VideoPlayer()
    player.setWindowTitle("Player")
    player.resize(900, 600)
    player.show()
    sys.exit(app.exec())


  


  The videos I want to play are in the same folder as this .py file.
The conda env (python 3.9.2) I am working on has the following packages :

  


  certifi                     2024.6.2
charset-normalizer          3.3.2
idna                        3.7
pip                         24.0
pynput                      1.7.6
PyQt6                       6.7.0
PyQt6-Qt6                   6.7.1
PyQt6-sip                   13.6.0
PyQt6-WebEngine             6.7.0
PyQt6-WebEngine-Qt6         6.7.1
PyQt6-WebEngineSubwheel-Qt6 6.7.1
pyserial                    3.5
requests                    2.31.0
setuptools                  69.5.1
six                         1.16.0
urllib3                     2.2.1
wheel                       0.43.0


  


  PS : MacOS seems to have the same issue.

  


• Index error with moviepy when running on aws

  29 avril 2024, par Hardik Patel

  I am getting this error :
"MoviePy error : failed to read the duration of file %s.\n"
OSError : MoviePy error : failed to read the duration of file https://delivery.gettyimages.com/downloads/1490392845?k=20&e=AnE-X_nyTRBG5QvUm1OnnCZEOURkdWAdDeQJTmDW8Eo41FL7u_ROCopEha5N-Kwh-fxBr44QIe5s2vzAUchlcVs91TwSlJTMOKWYSTraamKCPRcJv19CqNZRB_FgLaW_.

  


  The funny thing is that for the same line of code :

  


  video_duration = VideoFileClip(getty_url).duration


  


  when running on my mac, it is running fine. However when running from an aws server I am getting this error :

  


  [2024-04-29 05:55:42,126: ERROR/ForkPoolWorker-1] Task scripttovideoapp.create_video[18288b91-d304-400a-97a9-285fac776f85] raised unexpected: OSError('MoviePy error: failed to read the duration of file https://delivery.gettyimages.com/downloads/1490392845?k=20&e=AnE-X_nyTRBG5QvUm1OnnCZEOURkdWAdDeQJTmDW8Eo41FL7u_ROCopEha5N-Kwh-fxBr44QIe5s2vzAUchlcVs91TwSlJTMOKWYSTraamKCPRcJv19CqNZRB_FgLaW_.\nHere are the file infos returned by ffmpeg:\n\nffmpeg version 4.2.2-static https://johnvansickle.com/ffmpeg/  Copyright (c) 2000-2019 the FFmpeg developers\n  built with gcc 8 (Debian 8.3.0-6)\n  configuration: --enable-gpl --enable-version3 --enable-static --disable-debug --disable-ffplay --disable-indev=sndio --disable-outdev=sndio --cc=gcc --enable-fontconfig --enable-frei0r --enable-gnutls --enable-gmp --enable-libgme --enable-gray --enable-libaom --enable-libfribidi --enable-libass --enable-libvmaf --enable-libfreetype --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-librubberband --enable-libsoxr --enable-libspeex --enable-libsrt --enable-libvorbis --enable-libopus --enable-libtheora --enable-libvidstab --enable-libvo-amrwbenc --enable-libvpx --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxml2 --enable-libdav1d --enable-libxvid --enable-libzvbi --enable-libzimg\n  libavutil      56. 31.100 / 56. 31.100\n  libavcodec     58. 54.100 / 58. 54.100\n  libavformat    58. 29.100 / 58. 29.100\n  libavdevice    58.  8.100 / 58.  8.100\n  libavfilter     7. 57.100 /  7. 57.100\n  libswscale      5.  5.100 /  5.  5.100\n  libswresample   3.  5.100 /  3.  5.100\n  libpostproc    55.  5.100 / 55.  5.100\n')
Traceback (most recent call last):
  File "/home/ec2-user/.local/lib/python3.9/site-packages/moviepy/video/io/ffmpeg_reader.py", line 285, in ffmpeg_parse_infos
    line = [l for l in lines if keyword in l][index]
IndexError: list index out of range

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/ec2-user/.local/lib/python3.9/site-packages/celery/app/trace.py", line 477, in trace_task
    R = retval = fun(*args, **kwargs)
  File "/home/ec2-user/.local/lib/python3.9/site-packages/celery/app/trace.py", line 760, in __protected_call__
    return self.run(*args, **kwargs)
  File "/home/ec2-user/videoproj/scripttovideoapp.py", line 454, in create_video
    all_urls, video_details = process_script(script, paths, company_a, company_b, api_key)
  File "/home/ec2-user/videoproj/scripttovideoapp.py", line 232, in process_script
    video_duration = VideoFileClip(file).duration  # This needs to be replaced with a proper duration if available
  File "/home/ec2-user/.local/lib/python3.9/site-packages/moviepy/video/io/VideoFileClip.py", line 88, in __init__
    self.reader = FFMPEG_VideoReader(filename, pix_fmt=pix_fmt,
  File "/home/ec2-user/.local/lib/python3.9/site-packages/moviepy/video/io/ffmpeg_reader.py", line 35, in __init__
    infos = ffmpeg_parse_infos(filename, print_infos, check_duration,
  File "/home/ec2-user/.local/lib/python3.9/site-packages/moviepy/video/io/ffmpeg_reader.py", line 289, in ffmpeg_parse_infos
    raise IOError(("MoviePy error: failed to read the duration of file %s.\n"
OSError: MoviePy error: failed to read the duration of file https://delivery.gettyimages.com/downloads/1490392845?k=20&e=AnE-X_nyTRBG5QvUm1OnnCZEOURkdWAdDeQJTmDW8Eo41FL7u_ROCopEha5N-Kwh-fxBr44QIe5s2vzAUchlcVs91TwSlJTMOKWYSTraamKCPRcJv19CqNZRB_FgLaW_.
Here are the file infos returned by ffmpeg:

ffmpeg version 4.2.2-static https://johnvansickle.com/ffmpeg/  Copyright (c) 2000-2019 the FFmpeg developers
  built with gcc 8 (Debian 8.3.0-6)
  configuration: --enable-gpl --enable-version3 --enable-static --disable-debug --disable-ffplay --disable-indev=sndio --disable-outdev=sndio --cc=gcc --enable-fontconfig --enable-frei0r --enable-gnutls --enable-gmp --enable-libgme --enable-gray --enable-libaom --enable-libfribidi --enable-libass --enable-libvmaf --enable-libfreetype --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-librubberband --enable-libsoxr --enable-libspeex --enable-libsrt --enable-libvorbis --enable-libopus --enable-libtheora --enable-libvidstab --enable-libvo-amrwbenc --enable-libvpx --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxml2 --enable-libdav1d --enable-libxvid --enable-libzvbi --enable-libzimg
  libavutil      56. 31.100 / 56. 31.100
  libavcodec     58. 54.100 / 58. 54.100
  libavformat    58. 29.100 / 58. 29.100
  libavdevice    58.  8.100 / 58.  8.100
  libavfilter     7. 57.100 /  7. 57.100
  libswscale      5.  5.100 /  5.  5.100
  libswresample   3.  5.100 /  3.  5.100
  libpostproc    55.  5.100 / 55.  5.100



  


  I checked the version of my package on both mac and aws, the packages are the same. Went through different stackover flow solutions but non of them totally aligns with my issue.

  


• Error Opening RTMP Stream through FFmpeg command when executed through exec package [closed]

  3 octobre 2024, par Akhil

  I have been trying to transcode the live stream from RTMP server running on rtmp://localhost:1936/live/test with FFmpeg in a Go application using os/exec package, But seems to not work and gives the input/output error (I have attached below). The same exact ffmpeg command when I execute on terminal, works as its supposed to. Not Sure why that is, here is my code for reproducing and analyzing the mistakes.

  


  ffmpegCmd := fmt.Sprintf("ffmpeg -nostdin -i rtmp://localhost:1936/live/%s -c:v libx264 -s %s -f %s %s/stream.mpd",
        streamKey, resolution, sp.OutputFormat, outputPath)
    log.Printf("Executing FFmpeg command: %s", ffmpegCmd)

    // Prepare the command execution with a timeout context
    ctx, cancel := context.WithTimeout(context.Background(), 60*time.Second) // Set a 60-second timeout
    defer cancel()

    cmd := exec.CommandContext(ctx, "bash", "-c", ffmpegCmd)


  


  the ffmpeg command looks like this :
  
ffmpeg -nostdin -i rtmp://localhost:1936/live/test -c:v libx264 -s 1920x1080 -f dash output/test/1080p/stream.mpd

  


  I get the following error :

  


  Error opening input: Input/output error

Error opening input file rtmp://localhost:1936/live/test.

Error opening input files: Input/output error

Exiting normally, received signal 2.

signal: interrupt


  


  I have already tried to break the command, and then execute it. Something like :

  


  cmd := exec.CommandContext(ctx,
        "ffmpeg",
        "-nostdin",
        "-i", "rtmp://localhost:1936/live/"+streamKey,
        "-c:v", "libx264",
        "-s", resolution,
        "-f", sp.OutputFormat,
        outputPath+"/stream.mpd")


  


  After running the ffmpeg command with -loglevel debug and -report :

  


  Here is the logs and errors I get :

  


  When I run it within the go application :

  


  ffmpeg started on 2024-10-02 at 12:00:06
Report written to "ffmpeg-20241002-120006.log"
Log level: 48
Command line:
ffmpeg -loglevel debug -report -i rtmp://localhost:1936/live/test -c:v libx264 -s 1920x1080 -f dash ./output/test/1080p/stream.mpd
ffmpeg version 7.0.2 Copyright (c) 2000-2024 the FFmpeg developers
  built with Apple clang version 15.0.0 (clang-1500.3.9.4)
  configuration: --prefix=/opt/homebrew/Cellar/ffmpeg/7.0.2_1 --enable-shared --enable-pthreads --enable-version3 --cc=clang --host-cflags= --host-ldflags='-Wl,-ld_classic' --enable-ffplay --enable-gnutls --enable-gpl --enable-libaom --enable-libaribb24 --enable-libbluray --enable-libdav1d --enable-libharfbuzz --enable-libjxl --enable-libmp3lame --enable-libopus --enable-librav1e --enable-librist --enable-librubberband --enable-libsnappy --enable-libsrt --enable-libssh --enable-libsvtav1 --enable-libtesseract --enable-libtheora --enable-libvidstab --enable-libvmaf --enable-libvorbis --enable-libvpx --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxml2 --enable-libxvid --enable-lzma --enable-libfontconfig --enable-libfreetype --enable-frei0r --enable-libass --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-libspeex --enable-libsoxr --enable-libzmq --enable-libzimg --disable-libjack --disable-indev=jack --enable-videotoolbox --enable-audiotoolbox --enable-neon
  libavutil      59.  8.100 / 59.  8.100
  libavcodec     61.  3.100 / 61.  3.100
  libavformat    61.  1.100 / 61.  1.100
  libavdevice    61.  1.100 / 61.  1.100
  libavfilter    10.  1.100 / 10.  1.100
  libswscale      8.  1.100 /  8.  1.100
  libswresample   5.  1.100 /  5.  1.100
  libpostproc    58.  1.100 / 58.  1.100
Splitting the commandline.
Reading option '-loglevel' ... matched as option 'loglevel' (set logging level) with argument 'debug'.
Reading option '-report' ... matched as option 'report' (generate a report) with argument '1'.
Reading option '-i' ... matched as input url with argument 'rtmp://localhost:1936/live/test'.
Reading option '-c:v' ... matched as option 'c' (select encoder/decoder ('copy' to copy stream without reencoding)) with argument 'libx264'.
Reading option '-s' ... matched as option 's' (set frame size (WxH or abbreviation)) with argument '1920x1080'.
Reading option '-f' ... matched as option 'f' (force container format (auto-detected otherwise)) with argument 'dash'.
Reading option './output/test/1080p/stream.mpd' ... matched as output url.
Finished splitting the commandline.
Parsing a group of options: global .
Applying option loglevel (set logging level) with argument debug.
Applying option report (generate a report) with argument 1.
Successfully parsed a group of options.
Parsing a group of options: input url rtmp://localhost:1936/live/test.
Successfully parsed a group of options.
Opening an input file: rtmp://localhost:1936/live/test.
[AVFormatContext @ 0x13f721f90] Opening 'rtmp://localhost:1936/live/test' for reading
[rtmp @ 0x13f6040e0] No default whitelist set
[tcp @ 0x13f7223d0] No default whitelist set
[tcp @ 0x13f7223d0] Original list of addresses:
[tcp @ 0x13f7223d0] Address ::1 port 1936
[tcp @ 0x13f7223d0] Address 127.0.0.1 port 1936
[tcp @ 0x13f7223d0] Interleaved list of addresses:
[tcp @ 0x13f7223d0] Address ::1 port 1936
[tcp @ 0x13f7223d0] Address 127.0.0.1 port 1936
[tcp @ 0x13f7223d0] Starting connection attempt to ::1 port 1936
[tcp @ 0x13f7223d0] Connection attempt to ::1 port 1936 failed: Connection refused
[tcp @ 0x13f7223d0] Starting connection attempt to 127.0.0.1 port 1936
[tcp @ 0x13f7223d0] Successfully connected to 127.0.0.1 port 1936
[rtmp @ 0x13f6040e0] Handshaking...
[rtmp @ 0x13f6040e0] Type answer 3
[rtmp @ 0x13f6040e0] Server version 13.14.10.13
[rtmp @ 0x13f6040e0] Proto = rtmp, path = /live/test, app = live, fname = test
[rtmp @ 0x13f6040e0] Window acknowledgement size = 5000000
[rtmp @ 0x13f6040e0] Max sent, unacked = 5000000
[rtmp @ 0x13f6040e0] New incoming chunk size = 4096
[rtmp @ 0x13f6040e0] Creating stream...
[rtmp @ 0x13f6040e0] Sending play command for 'test'
[rtmp @ 0x13f6040e0] Deleting stream...
[in#0 @ 0x13f721d40] Error opening input: Input/output error
Error opening input file rtmp://localhost:1936/live/test.
Error opening input files: Input/output error
Exiting normally, received signal 2.


  


  This is what i get when i run the same command on terminal :

  


  <same as="as" but="but" please="please" scroll="scroll" further="further">&#xA;&#xA;[rtmp @ 0x1437144c0] No default whitelist set&#xA;[tcp @ 0x143604f20] No default whitelist set&#xA;[tcp @ 0x143604f20] Original list of addresses:&#xA;[tcp @ 0x143604f20] Address ::1 port 1936&#xA;[tcp @ 0x143604f20] Address 127.0.0.1 port 1936&#xA;[tcp @ 0x143604f20] Interleaved list of addresses:&#xA;[tcp @ 0x143604f20] Address ::1 port 1936&#xA;[tcp @ 0x143604f20] Address 127.0.0.1 port 1936&#xA;[tcp @ 0x143604f20] Starting connection attempt to ::1 port 1936&#xA;[tcp @ 0x143604f20] Connection attempt to ::1 port 1936 failed: Connection refused&#xA;[tcp @ 0x143604f20] Starting connection attempt to 127.0.0.1 port 1936&#xA;[tcp @ 0x143604f20] Successfully connected to 127.0.0.1 port 1936&#xA;[rtmp @ 0x1437144c0] Handshaking...&#xA;[rtmp @ 0x1437144c0] Type answer 3&#xA;[rtmp @ 0x1437144c0] Server version 13.14.10.13&#xA;[rtmp @ 0x1437144c0] Proto = rtmp, path = /live/test, app = live, fname = test&#xA;[rtmp @ 0x1437144c0] Window acknowledgement size = 5000000&#xA;[rtmp @ 0x1437144c0] Max sent, unacked = 5000000&#xA;[rtmp @ 0x1437144c0] New incoming chunk size = 4096&#xA;[rtmp @ 0x1437144c0] Creating stream...&#xA;[rtmp @ 0x1437144c0] Sending play command for &#x27;test&#x27;&#xA;[flv @ 0x143604b30] Format flv probed with size=2048 and score=100&#xA;[flv @ 0x143604b30] Before avformat_find_stream_info() pos: 13 bytes read:2263 seeks:0 nb_streams:0&#xA;Transform tree:&#xA;    mdct_inv_float_c - type: mdct_float, len: 64, factors[2]: [2, any], flags: [unaligned, out_of_place, inv_only]&#xA;        fft32_ns_float_neon - type: fft_float, len: 32, factor: 2, flags: [aligned, inplace, out_of_place, preshuf]&#xA;Transform tree:&#xA;    mdct_inv_float_c - type: mdct_float, len: 64, factors[2]: [2, any], flags: [unaligned, out_of_place, inv_only]&#xA;        fft32_ns_float_neon - type: fft_float, len: 32, factor: 2, flags: [aligned, inplace, out_of_place, preshuf]&#xA;Transform tree:&#xA;    mdct_pfa_15xM_inv_float_c - type: mdct_float, len: 120, factors[2]: [15, any], flags: [unaligned, out_of_place, inv_only]&#xA;        fft4_fwd_float_neon - type: fft_float, len: 4, factor: 2, flags: [aligned, inplace, out_of_place, preshuf]&#xA;Transform tree:&#xA;    mdct_inv_float_c - type: mdct_float, len: 128, factors[2]: [2, any], flags: [unaligned, out_of_place, inv_only]&#xA;        fft_sr_ns_float_neon - type: fft_float, len: 64, factor: 2, flags: [aligned, inplace, out_of_place, preshuf]&#xA;Transform tree:&#xA;    mdct_pfa_15xM_inv_float_c - type: mdct_float, len: 480, factors[2]: [15, any], flags: [unaligned, out_of_place, inv_only]&#xA;        fft16_ns_float_neon - type: fft_float, len: 16, factor: 2, flags: [aligned, inplace, out_of_place, preshuf]&#xA;Transform tree:&#xA;    mdct_inv_float_c - type: mdct_float, len: 512, factors[2]: [2, any], flags: [unaligned, out_of_place, inv_only]&#xA;        fft_sr_ns_float_neon - type: fft_float, len: 256, factor: 2, flags: [aligned, inplace, out_of_place, preshuf]&#xA;Transform tree:&#xA;    mdct_pfa_15xM_inv_float_c - type: mdct_float, len: 960, factors[2]: [15, any], flags: [unaligned, out_of_place, inv_only]&#xA;        fft32_ns_float_neon - type: fft_float, len: 32, factor: 2, flags: [aligned, inplace, out_of_place, preshuf]&#xA;Transform tree:&#xA;    mdct_inv_float_c - type: mdct_float, len: 1024, factors[2]: [2, any], flags: [unaligned, out_of_place, inv_only]&#xA;        fft_sr_ns_float_neon - type: fft_float, len: 512, factor: 2, flags: [aligned, inplace, out_of_place, preshuf]&#xA;Transform tree:&#xA;    mdct_fwd_float_c - type: mdct_float, len: 1024, factors[2]: [2, any], flags: [unaligned, out_of_place, fwd_only]&#xA;        fft_sr_ns_float_neon - type: fft_float, len: 512, factor: 2, flags: [aligned, inplace, out_of_place, preshuf]&#xA;[NULL @ 0x144124920] nal_unit_type: 7(SPS), nal_ref_idc: 3&#xA;[NULL @ 0x144124920] Decoding VUI&#xA;[NULL @ 0x144124920] nal_unit_type: 8(PPS), nal_ref_idc: 3&#xA;[NULL @ 0x144124920] Decoding VUI&#xA;[h264 @ 0x144124920] nal_unit_type: 7(SPS), nal_ref_idc: 3&#xA;[h264 @ 0x144124920] Decoding VUI&#xA;[h264 @ 0x144124920] nal_unit_type: 8(PPS), nal_ref_idc: 3&#xA;[h264 @ 0x144124920] nal_unit_type: 7(SPS), nal_ref_idc: 3&#xA;[h264 @ 0x144124920] nal_unit_type: 8(PPS), nal_ref_idc: 3&#xA;[h264 @ 0x144124920] nal_unit_type: 5(IDR), nal_ref_idc: 3&#xA;[h264 @ 0x144124920] Decoding VUI&#xA;[h264 @ 0x144124920] Format yuv420p chosen by get_format().&#xA;[h264 @ 0x144124920] Reinit context to 1280x720, pix_fmt: yuv420p&#xA;[h264 @ 0x144124920] no picture &#xA;[flv @ 0x143604b30] All info found&#xA;[flv @ 0x143604b30] rfps: 29.666667 0.016552&#xA;[flv @ 0x143604b30] rfps: 29.750000 0.009347&#xA;[flv @ 0x143604b30] rfps: 29.750000 0.009347&#xA;[flv @ 0x143604b30] rfps: 29.833333 0.004197&#xA;[flv @ 0x143604b30] rfps: 29.916667 0.001104&#xA;[flv @ 0x143604b30] rfps: 29.916667 0.001104&#xA;[flv @ 0x143604b30] rfps: 30.000000 0.000067&#xA;[flv @ 0x143604b30] rfps: 30.000000 0.000067&#xA;[flv @ 0x143604b30] rfps: 60.000000 0.000270&#xA;[flv @ 0x143604b30] rfps: 60.000000 0.000270&#xA;[flv @ 0x143604b30] rfps: 120.000000 0.001079&#xA;[flv @ 0x143604b30] rfps: 120.000000 0.001079&#xA;[flv @ 0x143604b30] rfps: 240.000000 0.004316&#xA;[flv @ 0x143604b30] rfps: 240.000000 0.004316&#xA;[flv @ 0x143604b30] rfps: 29.970030 0.000204&#xA;[flv @ 0x143604b30] rfps: 29.970030 0.000204&#xA;[flv @ 0x143604b30] rfps: 59.940060 0.000814&#xA;[flv @ 0x143604b30] rfps: 59.940060 0.000814&#xA;[flv @ 0x143604b30] After avformat_find_stream_info() pos: 496783 bytes read:496783 seeks:0 frames:179&#xA;Input #0, flv, from &#x27;rtmp://localhost:1936/live/test&#x27;:&#xA;  Metadata:&#xA;    |RtmpSampleAccess: true&#xA;    Server          : NGINX RTMP (github.com/arut/nginx-rtmp-module)&#xA;    displayWidth    : 1280&#xA;    displayHeight   : 720&#xA;    fps             : 30&#xA;    profile         : &#xA;    level           : &#xA;  Duration: 00:00:00.00, start: 6.742000, bitrate: N/A&#xA;  Stream #0:0, 138, 1/1000: Audio: aac (LC), 48000 Hz, stereo, fltp, 163 kb/s&#xA;  Stream #0:1, 41, 1/1000: Video: h264 (High), 1 reference frame, yuv420p(tv, bt709, progressive, left), 1280x720 [SAR 1:1 DAR 16:9], 0/1, 2560 kb/s, 30 fps, 30 tbr, 1k tbn&#xA;Successfully opened the file.&#xA;Parsing a group of options: output url ./output/test/1080p/stream.mpd.&#xA;Applying option c:v (select encoder/decoder (&#x27;copy&#x27; to copy stream without reencoding)) with argument libx264.&#xA;Applying option s (set frame size (WxH or abbreviation)) with argument 1920x1080.&#xA;Applying option f (force container format (auto-detected otherwise)) with argument dash.&#xA;Successfully parsed a group of options.&#xA;Opening an output file: ./output/test/1080p/stream.mpd.&#xA;[out#0/dash @ 0x123707480] No explicit maps, mapping streams automatically...&#xA;[vost#0:0/libx264 @ 0x123707d60] Created video stream from input stream 0:1&#xA;detected 10 logical cores&#xA;[h264 @ 0x123607b70] nal_unit_type: 7(SPS), nal_ref_idc: 3&#xA;[h264 @ 0x123607b70] Decoding VUI&#xA;[h264 @ 0x123607b70] nal_unit_type: 8(PPS), nal_ref_idc: 3&#xA;[aost#0:1/aac @ 0x144028080] Created audio stream from input stream 0:0&#xA;Transform tree:&#xA;    mdct_inv_float_c - type: md&#xA;&#xA;<it simply="simply" starts="starts" working="working">&#xA;</it></same>

  


  I am not sure if there is something to do with Permissions.