Recherche avancée

Médias (1)

Mot : - Tags -/getid3

Autres articles (43)

  • Les vidéos

    21 avril 2011, par

    Comme les documents de type "audio", Mediaspip affiche dans la mesure du possible les vidéos grâce à la balise html5 .
    Un des inconvénients de cette balise est qu’elle n’est pas reconnue correctement par certains navigateurs (Internet Explorer pour ne pas le nommer) et que chaque navigateur ne gère en natif que certains formats de vidéos.
    Son avantage principal quant à lui est de bénéficier de la prise en charge native de vidéos dans les navigateur et donc de se passer de l’utilisation de Flash et (...)

  • MediaSPIP v0.2

    21 juin 2013, par

    MediaSPIP 0.2 est la première version de MediaSPIP stable.
    Sa date de sortie officielle est le 21 juin 2013 et est annoncée ici.
    Le fichier zip ici présent contient uniquement les sources de MediaSPIP en version standalone.
    Comme pour la version précédente, il est nécessaire d’installer manuellement l’ensemble des dépendances logicielles sur le serveur.
    Si vous souhaitez utiliser cette archive pour une installation en mode ferme, il vous faudra également procéder à d’autres modifications (...)

  • Mise à disposition des fichiers

    14 avril 2011, par

    Par défaut, lors de son initialisation, MediaSPIP ne permet pas aux visiteurs de télécharger les fichiers qu’ils soient originaux ou le résultat de leur transformation ou encodage. Il permet uniquement de les visualiser.
    Cependant, il est possible et facile d’autoriser les visiteurs à avoir accès à ces documents et ce sous différentes formes.
    Tout cela se passe dans la page de configuration du squelette. Il vous faut aller dans l’espace d’administration du canal, et choisir dans la navigation (...)

Sur d’autres sites (7936)

  • Translating Handbrake options to a FFMPEG command

    9 mai 2020, par Arif

    I want to convert a bunch of videos from x264 to x265, but I need to do so with ffmpeg in terminal because it's a remote server. These are my Handbrake options (listed items are ticked) :

    



    Summary tab

    



      

    • Web optimized

      • 


    • Align A/V Start

      • 


    



    Dimensions tab unchanged

    



    Filters tab

    



      

    • Sharpen - LapSharp, preset : Medium

      • 


    



    Video tab

    



      


    • Video codec - H.265 (x265)

      • 


    • Framerate (FPS) - 30 - Peak Framerate

      • 


    • Quality - Constant Quality - 28

      • 


    • Encoder preset - Medium

      • 


    • Encoder tune - None

      • 


    • Encoder profile - Auto

      • 


    



    Audio tab

    



      

    • Audio track - AAC, bitrate : 128

      • 


    



    Subtitles tab - No subtitles (remove if exists)

    



    This is the ffmpeg command that I've managed to compile so far :

    



    ffmpeg -i input.mp4 -c:v libx265 -crf 28 -c:a aac -b:a 128k -max_muxing_queue_size 400 -movflags +faststart output.mp4

    



    I have the following two questions :

    



      

    1. Does the ffmpeg command provided list all the options except the peak framerate, sharpening filter and removing subtitle ones ? How do I incorporate these three ?

      2. 


    2. Slightly unrelated, but does having -max_muxing_queue_size 400 negatively affect file size or video quality ? I've only included this because I'd ran into encoding errors in the past.

      3. 


    



    Thank you.

    



    My Handbrake log with the above options, if it helps :

    



    Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'E:\input.mp4':
  Metadata:
    major_brand     : isom
    minor_version   : 512
    compatible_brands: isomiso2avc1mp41
    encoder         : Lavf58.10.100
  Duration: 00:02:20.52, start: 0.000000, bitrate: 1487 kb/s
    Stream #0:0(und): Video: h264 (High) [avc1 / 0x31637661]
      yuv420p, tv, bt709/bt709/bt709
      1280x720 [PAR 1:1 DAR 16:9], 1288 kb/s, PAR 1:1 DAR 16:9
      29.97 fps, 30k tbn (default)
    Metadata:
      handler_name    : VideoHandler
    Stream #0:1(eng): Audio: aac (LC) [mp4a / 0x6134706D]
      44100 Hz, stereo, fltp, 192 kb/s (default)
    Metadata:
      handler_name    : SoundHandler
[04:26:49] scan: decoding previews for title 1
[04:26:49] scan: audio 0x1: aac, rate=44100Hz, bitrate=192025 English (AAC) (2.0 ch)
[04:26:50] scan: 10 previews, 1280x720, 29.970 fps, autocrop = 0/0/0/0, aspect 16:9, PAR 1:1
[04:26:50] scan: supported video decoders: avcodec qsv
[04:26:50] libhb: scan thread found 1 valid title(s)
[04:26:50] starting job
[04:26:50] decomb filter thread started for segment 0
[04:26:50] decomb filter thread started for segment 1
[04:26:50] decomb filter thread started for segment 3
[04:26:50] decomb check thread started for segment 0
[04:26:50] decomb check thread started for segment 1
[04:26:50] yadif thread started for segment 0
[04:26:50] decomb check thread started for segment 3
[04:26:50] mask filter thread started for segment 0
[04:26:50] work: track 1, dithering not supported by codec
[04:26:50] mask filter thread started for segment 1
[04:26:50] work: only 1 chapter, disabling chapter markers
[04:26:50] job configuration:
[04:26:50]  * source
[04:26:50]    + E:\input.mp4
[04:26:50]    + title 1, chapter(s) 1 to 1
[04:26:50]    + container: mov,mp4,m4a,3gp,3g2,mj2
[04:26:50] mask filter thread started for segment 3
[04:26:50]    + data rate: 1487 kbps
[04:26:50]  * destination
[04:26:50]    + C:\Users\Hp\Desktop\output.mp4
[04:26:50]    + container: MPEG-4 (libavformat)
[04:26:50]      + optimized for HTTP streaming (fast start)
[04:26:50]      + align initial A/V stream timestamps
[04:26:50]  * video track
[04:26:50]    + decoder: h264
[04:26:50]      + bitrate 1288 kbps
[04:26:50]    + filters
[04:26:50] mask filter thread started for segment 2
[04:26:50]      + Comb Detect (mode=3:spatial-metric=2:motion-thresh=1:spatial-thresh=1:filter-mode=2:block-thresh=40:block-width=16:block-height=16)
[04:26:50]      + Decomb (mode=39)
[04:26:50]      + Framerate Shaper (mode=2:rate=27000000/900000)
[04:26:50]        + frame rate: 29.970 fps -> peak rate limited to 30.000 fps
[04:26:50] mask erode thread started for segment 1
[04:26:50]      + Crop and Scale (width=1280:height=720:crop-top=0:crop-bottom=0:crop-left=0:crop-right=0)
[04:26:50]        + source: 1280 * 720, crop (0/0/0/0): 1280 * 720, scale: 1280 * 720
[04:26:50]      + Sharpen (lapsharp) (y-strength=0.2:y-kernel=isolap:cb-strength=0.2:cb-kernel=isolap)
[04:26:50]    + Output geometry
[04:26:50]      + storage dimensions: 1280 x 720
[04:26:50]      + pixel aspect ratio: 1 : 1
[04:26:50]      + display dimensions: 1280 x 720
[04:26:50]    + encoder: H.265 (libx265)
[04:26:50]      + preset:  medium
[04:26:50]      + profile: auto
[04:26:50]      + quality: 28.00 (RF)
[04:26:50]  * audio track 1
[04:26:50] mask erode thread started for segment 2
[04:26:50]    + decoder: English (AAC) (2.0 ch) (track 1, id 0x1)
[04:26:50]      + bitrate: 192 kbps, samplerate: 44100 Hz
[04:26:50]    + mixdown: Stereo
[04:26:50]    + encoder: AAC (libavcodec)
[04:26:50]      + bitrate: 128 kbps, samplerate: 48000 Hz
[04:26:50] mask erode thread started for segment 3
[04:26:50] mask dilate thread started for segment 0
[04:26:50] mask dilate thread started for segment 1
[04:26:50] mask dilate thread started for segment 2
[04:26:50] decomb check thread started for segment 2
[04:26:50] yadif thread started for segment 1
[04:26:50] yadif thread started for segment 2
[04:26:50] yadif thread started for segment 3
[04:26:50] MTFrame thread started for segment 1
[04:26:50] MTFrame thread started for segment 2
[04:26:50] MTFrame thread started for segment 3
[04:26:50] mask dilate thread started for segment 3
[04:26:50] sync: expecting 4211 video frames
[04:26:50] mask erode thread started for segment 0
[04:26:50] decomb filter thread started for segment 2
[04:26:50] MTFrame thread started for segment 0
x265 [info]: HEVC encoder version 2.6
x265 [info]: build info [Windows][GCC 7.2.0][64 bit] 8bit+10bit+12bit
x265 [info]: using cpu capabilities: MMX2 SSE2Fast LZCNT SSSE3 SSE4.2 AVX FMA3 BMI2 AVX2
x265 [info]: Main profile, Level-3.1 (Main tier)
x265 [info]: Thread pool created using 4 threads
x265 [info]: Slices                              : 1
x265 [info]: frame threads / pool features       : 2 / wpp(12 rows)
x265 [info]: Coding QT: max CU size, min CU size : 64 / 8
x265 [info]: Residual QT: max TU size, max depth : 32 / 1 inter / 1 intra
x265 [info]: ME / range / subpel / merge         : hex / 57 / 2 / 2
x265 [info]: Keyframe min / max / scenecut / bias: 30 / 300 / 40 / 5.00
x265 [info]: Lookahead / bframes / badapt        : 20 / 4 / 2
x265 [info]: b-pyramid / weightp / weightb       : 1 / 1 / 0
x265 [info]: References / ref-limit  cu / depth  : 3 / on / on
x265 [info]: AQ: mode / str / qg-size / cu-tree  : 1 / 1.0 / 32 / 1
x265 [info]: Rate Control / qCompress            : CRF-28.0 / 0.60
x265 [info]: tools: rd=3 psy-rd=2.00 rskip signhide tmvp strong-intra-smoothing
x265 [info]: tools: lslices=4 deblock sao
[04:26:50] sync: first pts video is 0
[04:26:50] sync: "Chapter 1" (1) at frame 1 time 0
[04:26:50] sync: first pts audio 0x1 is 0
[04:40:02] reader: done. 1 scr changes
[04:40:13] work: average encoding speed for job is 5.245789 fps
[04:40:13] comb detect: heavy 3 | light 10 | uncombed 4198 | total 4211
[04:40:13] decomb: deinterlaced 3 | blended 10 | unfiltered 4198 | total 4211
[04:40:13] vfr: 4211 frames output, 0 dropped and 0 duped for CFR/PFR
[04:40:13] vfr: lost time: 0 (0 frames)
[04:40:13] vfr: gained time: 0 (0 frames) (0 not accounted for)
[04:40:13] aac-decoder done: 6052 frames, 0 decoder errors
[04:40:13] h264-decoder done: 4211 frames, 0 decoder errors
[04:40:13] sync: got 4211 frames, 4211 expected
[04:40:13] sync: framerate min 18.394 fps, max 29.970 fps, avg 29.966 fps
x265 [info]: frame I:     18, Avg QP:24.13  kb/s: 2900.85
x265 [info]: frame P:   1079, Avg QP:26.64  kb/s: 1040.14
x265 [info]: frame B:   3114, Avg QP:33.15  kb/s: 235.18
x265 [info]: Weighted P-Frames: Y:0.4% UV:0.4%
x265 [info]: consecutive B-frames: 4.0% 1.4% 20.1% 55.7% 18.8%
encoded 4211 frames in 802.93s (5.24 fps), 452.83 kb/s, Avg QP:31.44
[04:40:13] mux: track 0, 4211 frames, 7970061 bytes, 453.68 kbps, fifo 8192
[04:40:13] mux: track 1, 6588 frames, 2254132 bytes, 128.31 kbps, fifo 8192
[04:40:13] libhb: work result = 0

# Encode Completed ...


    


  • Revision 2de3c8d29b : Loop filter code cleanup. Cosmetic code changes, renaming 'flat' local var to '

    16 juillet 2013, par Dmitry Kovalev

    Changed Paths :
     Modify /vp9/common/vp9_loopfilter.c


     Modify /vp9/common/vp9_loopfilter.h


     Modify /vp9/common/vp9_loopfilter_filters.c



    Loop filter code cleanup.

    Cosmetic code changes, renaming 'flat' local var to 'mask', removing
    unused field 'blim' from loopfilter_info_n and loop_filter_info structs.

    Change-Id : I51e6ccf727fe361ad9a08e29e1201aa7abd4987f

  • ffmpeg output to framebuffer (fbdev) Raspberry Pi 4

    30 mars 2022, par Alex Beavren

    I have been trying to play a video on the frame buffer with ffmpeg. In theory this

    


    ffmpeg -i /dev/video0 -pix_fmt bgra -f fbdev /dev/fb0


    


    I get errors like

    


    [fbdev @ 0xfcb380] Pixel format bgra is not supported, use rgb565le
av_interleaved_write_frame(): Invalid argument


    


    or
Interlace errors when I use rgb565le.

    


    Confusingly when I try to read from the framebuffer, I get a screenshot of incorrect resolution which looks like a blank tty.

    


    sudo ffmpeg -f fbdev -framerate 1 -i /dev/fb0 -frames:v 1 screenAA3.jpeg


    


    I am running on a RPi4 with latest buster build. I have had issues with graphical packages not working with the post vulkan driver, could that be the issue ?

    


Navigation