Recherche avancée
Médias (1)
-
Rennes Emotion Map 2010-11
19 octobre 2011, par
Mis à jour : Juillet 2013
Langue : français
Type : Texte
Autres articles (96)
-
Sélection de projets utilisant MediaSPIP
29 avril 2011, parLes exemples cités ci-dessous sont des éléments représentatifs d’usages spécifiques de MediaSPIP pour certains projets.
Vous pensez avoir un site "remarquable" réalisé avec MediaSPIP ? Faites le nous savoir ici.
Ferme MediaSPIP @ Infini
L’Association Infini développe des activités d’accueil, de point d’accès internet, de formation, de conduite de projets innovants dans le domaine des Technologies de l’Information et de la Communication, et l’hébergement de sites. Elle joue en la matière un rôle unique (...) -
Multilang : améliorer l’interface pour les blocs multilingues
18 février 2011, parMultilang est un plugin supplémentaire qui n’est pas activé par défaut lors de l’initialisation de MediaSPIP.
Après son activation, une préconfiguration est mise en place automatiquement par MediaSPIP init permettant à la nouvelle fonctionnalité d’être automatiquement opérationnelle. Il n’est donc pas obligatoire de passer par une étape de configuration pour cela. -
Gestion des droits de création et d’édition des objets
8 février 2011, parPar défaut, beaucoup de fonctionnalités sont limitées aux administrateurs mais restent configurables indépendamment pour modifier leur statut minimal d’utilisation notamment : la rédaction de contenus sur le site modifiables dans la gestion des templates de formulaires ; l’ajout de notes aux articles ; l’ajout de légendes et d’annotations sur les images ;
Sur d’autres sites (5276)
-
HTTP Header for Duration of a MP4 for HTML 5 video
9 mars 2014, par MustafaI am trying to stream MP4 video as it is encoded from a webserver. I believe I used the appropriate flags, but it is not working correctly. When I download the video from my stream and open it with VLC, it properly shows the duration. Since a socket is not seekable, I assume it writes the metadata to end ? My Chrome browser always shows 8 seconds duration. The first 8 seconds plays at the normal speed, but afterwards the pause button turns into play button and the video plays very fast, probably as fast as it is recieved. However the audio is played at normal speed. I tried
document.getElementById('myVid').duration = 20000but it is a readonly field.I wonder, is there anyway to explicitly state the duration in HTTP headers or in any other way ? I cannot find any documentation about it.
ffmpeg -i - -vcodec libx264 -acodec libvo_aacenc -ar 44100 -ac 2 -ab 128000 -f mp4 -movflags frag_keyframe+faststart pipe:1 -fflags +genpts -re -profile baseline -level 30 -preset fastTo close-voters, that thinks it is not programming related, I use it in my own server I coded, and I need to set the duration programatically via JavaScript or setting the HTTP header. I believe it may be related to both ffmpeg or http headers, that's why I posted it here.
app.get("/video/*", function(req,res){
res.writeHead(200, {
'Content-Type': 'video/mp4',
});
var dir = req.url.split("/").splice(2).join("/");
var buf = new Buffer(dir, 'base64');
var src = buf.toString();
var Transcoder = require('stream-transcoder');
var stream = fs.createReadStream(src);
// I added my own flags to this module, they are at below:
new Transcoder(stream)
.videoCodec('libx264')
.audioCodec("libvo_aacenc")
.sampleRate(44100)
.channels(2)
.audioBitrate(128 * 1000)
.format('mp4')
.on('finish', function() {
console.log("finished");
})
.stream().pipe(res);
});exec function in that stream-transcoder module,
a.push("-fflags");
a.push("+genpts");
a.push("-re");
a.push("-profile");
a.push("baseline");
a.push("-level");
a.push("30");
a.push("-preset");
a.push("fast");
a.push("-strict");
a.push("experimental");
a.push("-frag_duration");
a.push("" + 2 * (1000 * 1000));
var child = spawn('ffmpeg', a, {
cwd: os.tmpdir()
}); -
How can fix CalledProcessError : in ffmpeg
7 décembre 2020, par MarioI hope someone can help to troubleshoot this problem. I'm trying to save the loss plots out of Keras in the form of the following animation.






but I have been facing the following error, and ultimately I can't save the animation :



MovieWriter stderr:
[h264_v4l2m2m @ 0x55a67176f430] Could not find a valid device
[h264_v4l2m2m @ 0x55a67176f430] can't configure encoder
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height

---------------------------------------------------------------------------
BrokenPipeError Traceback (most recent call last)
~/anaconda3/envs/CR7/lib/python3.6/site-packages/matplotlib/animation.py in saving(self, fig, outfile, dpi, *args, **kwargs)
 229 try:
--> 230 yield self
 231 finally:

~/anaconda3/envs/CR7/lib/python3.6/site-packages/matplotlib/animation.py in save(self, filename, writer, fps, dpi, codec, bitrate, extra_args, metadata, extra_anim, savefig_kwargs, progress_callback)
 1155 frame_number += 1
-> 1156 writer.grab_frame(**savefig_kwargs)
 1157 

~/anaconda3/envs/CR7/lib/python3.6/site-packages/matplotlib/animation.py in grab_frame(self, **savefig_kwargs)
 383 self.fig.savefig(self._frame_sink(), format=self.frame_format,
--> 384 dpi=self.dpi, **savefig_kwargs)
 385 

~/anaconda3/envs/CR7/lib/python3.6/site-packages/matplotlib/figure.py in savefig(self, fname, transparent, **kwargs)
 2179 
-> 2180 self.canvas.print_figure(fname, **kwargs)
 2181 

~/anaconda3/envs/CR7/lib/python3.6/site-packages/matplotlib/backend_bases.py in print_figure(self, filename, dpi, facecolor, edgecolor, orientation, format, bbox_inches, **kwargs)
 2081 bbox_inches_restore=_bbox_inches_restore,
-> 2082 **kwargs)
 2083 finally:

~/anaconda3/envs/CR7/lib/python3.6/site-packages/matplotlib/backends/backend_agg.py in print_raw(self, filename_or_obj, *args, **kwargs)
 445 cbook.open_file_cm(filename_or_obj, "wb") as fh:
--> 446 fh.write(renderer._renderer.buffer_rgba())
 447 

BrokenPipeError: [Errno 32] Broken pipe

During handling of the above exception, another exception occurred:

CalledProcessError Traceback (most recent call last)
 in <module>
 17 print(f'{model_type.upper()} Train Time: {Timer} sec')
 18 
---> 19 create_loss_animation(model_type, hist.history['loss'], hist.history['val_loss'], epoch)
 20 
 21 evaluate(model, trainX, trainY, testX, testY, scores_train, scores_test)

 in create_loss_animation(model_type, loss_hist, val_loss_hist, epoch)
 34 
 35 ani = matplotlib.animation.FuncAnimation(fig, animate, fargs=(l1, l2, loss, val_loss, title), repeat=True, interval=1000, repeat_delay=1000)
---> 36 ani.save(f'loss_animation_{model_type}_oneDataset.mp4', writer=writer)

~/anaconda3/envs/CR7/lib/python3.6/site-packages/matplotlib/animation.py in save(self, filename, writer, fps, dpi, codec, bitrate, extra_args, metadata, extra_anim, savefig_kwargs, progress_callback)
 1154 progress_callback(frame_number, total_frames)
 1155 frame_number += 1
-> 1156 writer.grab_frame(**savefig_kwargs)
 1157 
 1158 # Reconnect signal for first draw if necessary

~/anaconda3/envs/CR7/lib/python3.6/contextlib.py in __exit__(self, type, value, traceback)
 97 value = type()
 98 try:
---> 99 self.gen.throw(type, value, traceback)
 100 except StopIteration as exc:
 101 # Suppress StopIteration *unless* it's the same exception that

~/anaconda3/envs/CR7/lib/python3.6/site-packages/matplotlib/animation.py in saving(self, fig, outfile, dpi, *args, **kwargs)
 230 yield self
 231 finally:
--> 232 self.finish()
 233 
 234 

~/anaconda3/envs/CR7/lib/python3.6/site-packages/matplotlib/animation.py in finish(self)
 365 def finish(self):
 366 '''Finish any processing for writing the movie.'''
--> 367 self.cleanup()
 368 
 369 def grab_frame(self, **savefig_kwargs):

~/anaconda3/envs/CR7/lib/python3.6/site-packages/matplotlib/animation.py in cleanup(self)
 409 if self._proc.returncode:
 410 raise subprocess.CalledProcessError(
--> 411 self._proc.returncode, self._proc.args, out, err)
 412 
 413 @classmethod

CalledProcessError: Command '['/usr/bin/ffmpeg', '-f', 'rawvideo', '-vcodec', 'rawvideo', '-s', '720x720', '-pix_fmt', 
'rgba', '-r', '5', '-loglevel', 'error', '-i', 'pipe:', '-vcodec', 'h264', '-pix_fmt', 'yuv420p', '-b', '800k', '-y', 
'loss_animation_CNN_oneDataset.mp4']' returned non-zero exit status 1.
</module>


I tried to ignore the error by this answer but it seems it's not the case. I also checked similar case but its answer for getting a static git binary is not my cas as well since not especial converting PNG to MP4 !



My code is as follows :



plt.rcParams['animation.ffmpeg_path'] = '/usr/bin/ffmpeg'

def animate(i, data1, data2, line1, line2):
 temp1 = data1.iloc[:int(i+1)]
 temp2 = data2.iloc[:int(i+1)]

 line1.set_data(temp1.index, temp1.value)
 line2.set_data(temp2.index, temp2.value)

 return (line1, line2)


def create_loss_animation(model_type, data1, data2):
 fig = plt.figure()
 plt.title(f'Loss on Train & Test', fontsize=25)
 plt.xlabel('Epoch', fontsize=20)
 plt.ylabel('Loss MSE for Sx-Sy & Sxy', fontsize=20)
 plt.xlim(min(data1.index.min(), data2.index.min()), max(data1.index.max(), data2.index.max()))
 plt.ylim(min(data1.value.min(), data2.value.min()), max(data1.value.max(), data2.value.max()))

 l1, = plt.plot([], [], 'o-', label='Train Loss', color='b', markevery=[-1])
 l2, = plt.plot([], [], 'o-', label='Test Loss', color='r', markevery=[-1])
 plt.legend(loc='center right', fontsize='xx-large')

 Writer = animation.writers['ffmpeg']
 writer = Writer(fps=5, bitrate=1800)

 ani = matplotlib.animation.FuncAnimation(fig, animate, fargs=(data1, data2, l1, l2), repeat=True, interval=1000, repeat_delay=1000)
 ani.save(f'{model_type}.mp4', writer=writer)

# create datasets
x = np.linspace(0,150,50)
y1 = 41*np.exp(-x/20)
y2 = 35*np.exp(-x/50)

my_data_number_1 = pd.DataFrame({'x':x, 'value':y1}).set_index('x')
my_data_number_2 = pd.DataFrame({'x':x, 'value':y2}).set_index('x')

create_loss_animation('test', my_data_number_1, my_data_number_2)


-
Access violation reading location 0x000000148965F000
14 février 2014, par user3012914I tried to encode BMP Images, which i get from a buffer and store it as a H264 Video. I am stuck with these errors the arrive randomly and repeatedly
I am using Visual Studio 2012
1) Access violation reading location 0x000000148965F000.
2)Heap corruption
The debug shows the error at this point
struct SwsContext* fooContext = sws_getContext(_imgWidth,_imgHeight,PIX_FMT_RGB32,c->width,c->height,PIX_FMT_YUV420P, SWS_FAST_BILINEAR,NULL,NULL,NULL);
sws_scale(fooContext, inpic->data, inpic->linesize, 0, c->height, outpic->data, outpic->linesize); // converting frame size and formatI guess the read violation happens due to non - pre initialized values. But i couldnt exactly understand why. I have also attached part of the code below
PagedImage *inImg = getUpdatedInputImage(0);
ML_CHECK(inImg);
ImageVector imgExt = inImg->getImageExtent();
if ((imgExt.x == _imgWidth) && (imgExt.y == _imgHeight))
{
if (((imgExt.x % 4) == 0) && ((imgExt.y % 4) == 0))
{
_numFramesFld->setIntValue(_numFramesFld->getIntValue() + 1);
MLFree(unicodeFilename);
// configure header
//BITMAPINFO bitmapInfo
// read out input image and write output image into video
// get input image as an array
void* imgData = NULL;
SubImageBox imageBox(imgExt); // get the whole image
getTile(inImg, imageBox, MLuint8Type, &imgData);
MLuint8* iData = (MLuint8*)imgData;
// since we have only images with
// a z-ext of 1, we can compute the c stride as follows
int cStride = _imgWidth * _imgHeight;
int offset = 0;
MLuint8 r=0, g=0, b=0;
// pointer into the bitmap that is
// used to write images into an video
UCHAR* dst = (UCHAR*)_bits;
for (int y = _imgHeight-1; y >= 0; y--)
{ // reversely scan the image. if y-rows of DIB are set in normal order, no compression will be available.
offset = _imgWidth * y;
for (int x = 0; x < _imgWidth; x++)
{
if (_isGreyValueImage)
{
r = iData[offset + x];
*dst++ = (UCHAR)r;
*dst++ = (UCHAR)r;
*dst++ = (UCHAR)r;
}
else
{
b = iData[offset + x]; // windows bitmap need reverse order: bgr instead of rgb
g = iData[offset + x + cStride ];
r = iData[offset + x + cStride + cStride];
*dst++ = (UCHAR)r;
*dst++ = (UCHAR)g;
*dst++ = (UCHAR)b;
}
// alpha channel in input image is ignored
}
}
outbuf_size = 100000 + c->width*c->height*(32>>3); // allocate output buffer
outbuf = static_cast(malloc(outbuf_size));
fileName_ = (_outputFilenameFld->getStringValue()).c_str();
FILE* f = fopen(fileName_,"wb"); // opening video file for writing
if(!f)
{
_messageFld->setStringValue("Cannot open file");
}
else _messageFld->setStringValue("Opened video file for writing\n");
//for(i=0;i<_numFramesFld->getIntValue();i++)
//{
fflush(stdout);
int nbytes = avpicture_get_size(PIX_FMT_YUV420P, c->width, c->height); // allocating outbuffer
uint8_t* outbuffer = (uint8_t*)av_malloc(nbytes*sizeof(uint8_t));
AVFrame* inpic = avcodec_alloc_frame(); // mandatory frame allocation
AVFrame* outpic = avcodec_alloc_frame();
//outpic->pts = (int64_t)((float)i * (1000.0/((float)(c->time_base.den))) * 90); // setting frame pts
avpicture_fill((AVPicture*)inpic,(uint8_t*)dst, PIX_FMT_RGB32, c->width, c->height); // fill image with input screenshot
avpicture_fill((AVPicture*)outpic, outbuffer, PIX_FMT_YUV420P, c->width, c->height); // clear output picture for buffer copy
av_image_alloc(outpic->data, outpic->linesize, c->width, c->height, c->pix_fmt, 1);
inpic->data[0] += inpic->linesize[0]*(c->height-1); // flipping frame
inpic->linesize[0] = -inpic->linesize[0]; // flipping frame
struct SwsContext* fooContext = sws_getContext(_imgWidth,_imgHeight,PIX_FMT_RGB32,c->width,c->height,PIX_FMT_YUV420P, SWS_FAST_BILINEAR,NULL,NULL,NULL);
sws_scale(fooContext, inpic->data, inpic->linesize, 0, c->height, outpic->data, outpic->linesize); // converting frame size and format
out_size = avcodec_encode_video(c, outbuf, outbuf_size, outpic); // encoding video
_messageFld->setStringValue("Encoding frame %3d (size=%5d)\n");
fwrite(outbuf, 1, out_size, f);
delete [] dst; // freeing memory
av_free(outbuffer);
av_free(inpic);
av_free(outpic);
av_free(fooContext);
DeleteObject(_hbitmap);
for(int Z = 0; Z/ encode the delayed frames
fwrite(outbuf, 1, out_size, f);
}
//outbuf[0] = 0x00;
//outbuf[1] = 0x00; // add sequence end code to have a real mpeg file
//outbuf[2] = 0x01;
//outbuf[3] = 0xb7;
//fwrite(outbuf, 1, 4, f);
fclose(f);
avcodec_close(c); // freeing memory
free(outbuf);
av_free(c);
printf("Closed codec and Freed\n");
}
}
Syndiquer tout le site
