Recherche avancée
Autres articles (83)
-
Support de tous types de médias
10 avril 2011Contrairement à beaucoup de logiciels et autres plate-formes modernes de partage de documents, MediaSPIP a l’ambition de gérer un maximum de formats de documents différents qu’ils soient de type : images (png, gif, jpg, bmp et autres...) ; audio (MP3, Ogg, Wav et autres...) ; vidéo (Avi, MP4, Ogv, mpg, mov, wmv et autres...) ; contenu textuel, code ou autres (open office, microsoft office (tableur, présentation), web (html, css), LaTeX, Google Earth) (...)
-
Les tâches Cron régulières de la ferme
1er décembre 2010, parLa gestion de la ferme passe par l’exécution à intervalle régulier de plusieurs tâches répétitives dites Cron.
Le super Cron (gestion_mutu_super_cron)
Cette tâche, planifiée chaque minute, a pour simple effet d’appeler le Cron de l’ensemble des instances de la mutualisation régulièrement. Couplée avec un Cron système sur le site central de la mutualisation, cela permet de simplement générer des visites régulières sur les différents sites et éviter que les tâches des sites peu visités soient trop (...) -
Les statuts des instances de mutualisation
13 mars 2010, parPour des raisons de compatibilité générale du plugin de gestion de mutualisations avec les fonctions originales de SPIP, les statuts des instances sont les mêmes que pour tout autre objets (articles...), seuls leurs noms dans l’interface change quelque peu.
Les différents statuts possibles sont : prepa (demandé) qui correspond à une instance demandée par un utilisateur. Si le site a déjà été créé par le passé, il est passé en mode désactivé. publie (validé) qui correspond à une instance validée par un (...)
Sur d’autres sites (7618)
-
How to play raw h264 produced by MediaCodec encoder ?
1er novembre 2014, par jackos2500I’m a bit new when it comes to MediaCodec (and video encoding/decoding in general), so correct me if anything I say here is wrong.
I want to play the raw h264 output of MediaCodec with VLC/ffplay. I need this to play becuase my end goal is to stream some live video to a computer, and MediaMuxer only produces a file on disk rather than something I can stream with (very) low latency to a desktop. (I’m open to other solutions, but I have not found anything else that fits the latency requirement)
Here is the code I’m using encode the video and write it to a file : (it’s based off the MediaCodec example found here, only with the MediaMuxer part removed)
package com.jackos2500.droidtop;
import android.media.MediaCodec;
import android.media.MediaCodecInfo;
import android.media.MediaFormat;
import android.opengl.EGL14;
import android.opengl.EGLConfig;
import android.opengl.EGLContext;
import android.opengl.EGLDisplay;
import android.opengl.EGLExt;
import android.opengl.EGLSurface;
import android.opengl.GLES20;
import android.os.Environment;
import android.util.Log;
import android.view.Surface;
import java.io.BufferedOutputStream;
import java.io.File;
import java.io.FileOutputStream;
import java.io.IOException;
import java.nio.ByteBuffer;
public class StreamH264 {
private static final String TAG = "StreamH264";
private static final boolean VERBOSE = true; // lots of logging
// where to put the output file (note: /sdcard requires WRITE_EXTERNAL_STORAGE permission)
private static final File OUTPUT_DIR = Environment.getExternalStorageDirectory();
public static int MEGABIT = 1000 * 1000;
private static final int IFRAME_INTERVAL = 10;
private static final int TEST_R0 = 0;
private static final int TEST_G0 = 136;
private static final int TEST_B0 = 0;
private static final int TEST_R1 = 236;
private static final int TEST_G1 = 50;
private static final int TEST_B1 = 186;
private MediaCodec codec;
private CodecInputSurface inputSurface;
private BufferedOutputStream out;
private MediaCodec.BufferInfo bufferInfo;
public StreamH264() {
}
private void prepareEncoder() throws IOException {
bufferInfo = new MediaCodec.BufferInfo();
MediaFormat format = MediaFormat.createVideoFormat("video/avc", 1280, 720);
format.setInteger(MediaFormat.KEY_BIT_RATE, 2 * MEGABIT);
format.setInteger(MediaFormat.KEY_FRAME_RATE, 30);
format.setInteger(MediaFormat.KEY_COLOR_FORMAT, MediaCodecInfo.CodecCapabilities.COLOR_FormatSurface);
format.setInteger(MediaFormat.KEY_I_FRAME_INTERVAL, IFRAME_INTERVAL);
codec = MediaCodec.createEncoderByType("video/avc");
codec.configure(format, null, null, MediaCodec.CONFIGURE_FLAG_ENCODE);
inputSurface = new CodecInputSurface(codec.createInputSurface());
codec.start();
File dst = new File(OUTPUT_DIR, "test.264");
out = new BufferedOutputStream(new FileOutputStream(dst));
}
private void releaseEncoder() throws IOException {
if (VERBOSE) Log.d(TAG, "releasing encoder objects");
if (codec != null) {
codec.stop();
codec.release();
codec = null;
}
if (inputSurface != null) {
inputSurface.release();
inputSurface = null;
}
if (out != null) {
out.flush();
out.close();
out = null;
}
}
public void stream() throws IOException {
try {
prepareEncoder();
inputSurface.makeCurrent();
for (int i = 0; i < (30 * 5); i++) {
// Feed any pending encoder output into the file.
drainEncoder(false);
// Generate a new frame of input.
generateSurfaceFrame(i);
inputSurface.setPresentationTime(computePresentationTimeNsec(i, 30));
// Submit it to the encoder. The eglSwapBuffers call will block if the input
// is full, which would be bad if it stayed full until we dequeued an output
// buffer (which we can't do, since we're stuck here). So long as we fully drain
// the encoder before supplying additional input, the system guarantees that we
// can supply another frame without blocking.
if (VERBOSE) Log.d(TAG, "sending frame " + i + " to encoder");
inputSurface.swapBuffers();
}
// send end-of-stream to encoder, and drain remaining output
drainEncoder(true);
} finally {
// release encoder, muxer, and input Surface
releaseEncoder();
}
}
private void drainEncoder(boolean endOfStream) throws IOException {
final int TIMEOUT_USEC = 10000;
if (VERBOSE) Log.d(TAG, "drainEncoder(" + endOfStream + ")");
if (endOfStream) {
if (VERBOSE) Log.d(TAG, "sending EOS to encoder");
codec.signalEndOfInputStream();
}
ByteBuffer[] outputBuffers = codec.getOutputBuffers();
while (true) {
int encoderStatus = codec.dequeueOutputBuffer(bufferInfo, TIMEOUT_USEC);
if (encoderStatus == MediaCodec.INFO_TRY_AGAIN_LATER) {
// no output available yet
if (!endOfStream) {
break; // out of while
} else {
if (VERBOSE) Log.d(TAG, "no output available, spinning to await EOS");
}
} else if (encoderStatus == MediaCodec.INFO_OUTPUT_BUFFERS_CHANGED) {
// not expected for an encoder
outputBuffers = codec.getOutputBuffers();
} else if (encoderStatus == MediaCodec.INFO_OUTPUT_FORMAT_CHANGED) {
// should happen before receiving buffers, and should only happen once
MediaFormat newFormat = codec.getOutputFormat();
Log.d(TAG, "encoder output format changed: " + newFormat);
} else if (encoderStatus < 0) {
Log.w(TAG, "unexpected result from encoder.dequeueOutputBuffer: " + encoderStatus);
// let's ignore it
} else {
ByteBuffer encodedData = outputBuffers[encoderStatus];
if (encodedData == null) {
throw new RuntimeException("encoderOutputBuffer " + encoderStatus + " was null");
}
if ((bufferInfo.flags & MediaCodec.BUFFER_FLAG_CODEC_CONFIG) != 0) {
// The codec config data was pulled out and fed to the muxer when we got
// the INFO_OUTPUT_FORMAT_CHANGED status. Ignore it.
if (VERBOSE) Log.d(TAG, "ignoring BUFFER_FLAG_CODEC_CONFIG");
bufferInfo.size = 0;
}
if (bufferInfo.size != 0) {
// adjust the ByteBuffer values to match BufferInfo (not needed?)
encodedData.position(bufferInfo.offset);
encodedData.limit(bufferInfo.offset + bufferInfo.size);
byte[] data = new byte[bufferInfo.size];
encodedData.get(data);
out.write(data);
if (VERBOSE) Log.d(TAG, "sent " + bufferInfo.size + " bytes to file");
}
codec.releaseOutputBuffer(encoderStatus, false);
if ((bufferInfo.flags & MediaCodec.BUFFER_FLAG_END_OF_STREAM) != 0) {
if (!endOfStream) {
Log.w(TAG, "reached end of stream unexpectedly");
} else {
if (VERBOSE) Log.d(TAG, "end of stream reached");
}
break; // out of while
}
}
}
}
private void generateSurfaceFrame(int frameIndex) {
frameIndex %= 8;
int startX, startY;
if (frameIndex < 4) {
// (0,0) is bottom-left in GL
startX = frameIndex * (1280 / 4);
startY = 720 / 2;
} else {
startX = (7 - frameIndex) * (1280 / 4);
startY = 0;
}
GLES20.glClearColor(TEST_R0 / 255.0f, TEST_G0 / 255.0f, TEST_B0 / 255.0f, 1.0f);
GLES20.glClear(GLES20.GL_COLOR_BUFFER_BIT);
GLES20.glEnable(GLES20.GL_SCISSOR_TEST);
GLES20.glScissor(startX, startY, 1280 / 4, 720 / 2);
GLES20.glClearColor(TEST_R1 / 255.0f, TEST_G1 / 255.0f, TEST_B1 / 255.0f, 1.0f);
GLES20.glClear(GLES20.GL_COLOR_BUFFER_BIT);
GLES20.glDisable(GLES20.GL_SCISSOR_TEST);
}
private static long computePresentationTimeNsec(int frameIndex, int frameRate) {
final long ONE_BILLION = 1000000000;
return frameIndex * ONE_BILLION / frameRate;
}
/**
* Holds state associated with a Surface used for MediaCodec encoder input.
* <p>
* The constructor takes a Surface obtained from MediaCodec.createInputSurface(), and uses that
* to create an EGL window surface. Calls to eglSwapBuffers() cause a frame of data to be sent
* to the video encoder.
* </p><p>
* This object owns the Surface -- releasing this will release the Surface too.
*/
private static class CodecInputSurface {
private static final int EGL_RECORDABLE_ANDROID = 0x3142;
private EGLDisplay mEGLDisplay = EGL14.EGL_NO_DISPLAY;
private EGLContext mEGLContext = EGL14.EGL_NO_CONTEXT;
private EGLSurface mEGLSurface = EGL14.EGL_NO_SURFACE;
private Surface mSurface;
/**
* Creates a CodecInputSurface from a Surface.
*/
public CodecInputSurface(Surface surface) {
if (surface == null) {
throw new NullPointerException();
}
mSurface = surface;
eglSetup();
}
/**
* Prepares EGL. We want a GLES 2.0 context and a surface that supports recording.
*/
private void eglSetup() {
mEGLDisplay = EGL14.eglGetDisplay(EGL14.EGL_DEFAULT_DISPLAY);
if (mEGLDisplay == EGL14.EGL_NO_DISPLAY) {
throw new RuntimeException("unable to get EGL14 display");
}
int[] version = new int[2];
if (!EGL14.eglInitialize(mEGLDisplay, version, 0, version, 1)) {
throw new RuntimeException("unable to initialize EGL14");
}
// Configure EGL for recording and OpenGL ES 2.0.
int[] attribList = {
EGL14.EGL_RED_SIZE, 8,
EGL14.EGL_GREEN_SIZE, 8,
EGL14.EGL_BLUE_SIZE, 8,
EGL14.EGL_ALPHA_SIZE, 8,
EGL14.EGL_RENDERABLE_TYPE, EGL14.EGL_OPENGL_ES2_BIT,
EGL_RECORDABLE_ANDROID, 1,
EGL14.EGL_NONE
};
EGLConfig[] configs = new EGLConfig[1];
int[] numConfigs = new int[1];
EGL14.eglChooseConfig(mEGLDisplay, attribList, 0, configs, 0, configs.length,
numConfigs, 0);
checkEglError("eglCreateContext RGB888+recordable ES2");
// Configure context for OpenGL ES 2.0.
int[] attrib_list = {
EGL14.EGL_CONTEXT_CLIENT_VERSION, 2,
EGL14.EGL_NONE
};
mEGLContext = EGL14.eglCreateContext(mEGLDisplay, configs[0], EGL14.EGL_NO_CONTEXT,
attrib_list, 0);
checkEglError("eglCreateContext");
// Create a window surface, and attach it to the Surface we received.
int[] surfaceAttribs = {
EGL14.EGL_NONE
};
mEGLSurface = EGL14.eglCreateWindowSurface(mEGLDisplay, configs[0], mSurface,
surfaceAttribs, 0);
checkEglError("eglCreateWindowSurface");
}
/**
* Discards all resources held by this class, notably the EGL context. Also releases the
* Surface that was passed to our constructor.
*/
public void release() {
if (mEGLDisplay != EGL14.EGL_NO_DISPLAY) {
EGL14.eglMakeCurrent(mEGLDisplay, EGL14.EGL_NO_SURFACE, EGL14.EGL_NO_SURFACE,
EGL14.EGL_NO_CONTEXT);
EGL14.eglDestroySurface(mEGLDisplay, mEGLSurface);
EGL14.eglDestroyContext(mEGLDisplay, mEGLContext);
EGL14.eglReleaseThread();
EGL14.eglTerminate(mEGLDisplay);
}
mSurface.release();
mEGLDisplay = EGL14.EGL_NO_DISPLAY;
mEGLContext = EGL14.EGL_NO_CONTEXT;
mEGLSurface = EGL14.EGL_NO_SURFACE;
mSurface = null;
}
/**
* Makes our EGL context and surface current.
*/
public void makeCurrent() {
EGL14.eglMakeCurrent(mEGLDisplay, mEGLSurface, mEGLSurface, mEGLContext);
checkEglError("eglMakeCurrent");
}
/**
* Calls eglSwapBuffers. Use this to "publish" the current frame.
*/
public boolean swapBuffers() {
boolean result = EGL14.eglSwapBuffers(mEGLDisplay, mEGLSurface);
checkEglError("eglSwapBuffers");
return result;
}
/**
* Sends the presentation time stamp to EGL. Time is expressed in nanoseconds.
*/
public void setPresentationTime(long nsecs) {
EGLExt.eglPresentationTimeANDROID(mEGLDisplay, mEGLSurface, nsecs);
checkEglError("eglPresentationTimeANDROID");
}
/**
* Checks for EGL errors. Throws an exception if one is found.
*/
private void checkEglError(String msg) {
int error;
if ((error = EGL14.eglGetError()) != EGL14.EGL_SUCCESS) {
throw new RuntimeException(msg + ": EGL error: 0x" + Integer.toHexString(error));
}
}
}
}
</p>However, the file produced from this code does not play with VLC or ffplay. Can anyone tell me what I’m doing wrong ? I believe it is due to an incorrect format (or total lack) of headers required for the playing of raw h264, as I have had success playing .264 files downloaded from the internet with ffplay. Also, I’m not sure exactly how I’m going to stream this video to a computer, so if somebody could give me some suggestions as to how I might do that, I would be very grateful ! Thanks !
-
Revision 7bea8c59f9 : Rework pred pixel buffer system in non-RD coding mode This commit makes the int
30 octobre 2014, par Jingning HanChanged Paths :
Modify /vp9/encoder/vp9_encodeframe.c
Modify /vp9/encoder/vp9_pickmode.c
Rework pred pixel buffer system in non-RD coding modeThis commit makes the inter prediction buffer system to support
hybrid partition search. It reduces the runtime of speed -5 by
about 3%. No compression performance change.vidyo1 720p 1000 kbps
11831 ms -> 11497 msnik 720p 1000 kbps
10919 ms -> 10645 msChange-Id : I5b2da747c6395c253cd074d3907f5402e1840c36
-
FFmpeg copying from udp to rtsp
28 décembre 2014, par ladi2000So I have a (live)video stream on udp ://10.5.5.100:8463 and I copy it to udp ://localhost:1000.
ffmpeg -f mpegts -i "udp://10.5.5.100:8554?fifo_size=10000" -f mpegts -vcodec copy udp://localhost:1000/goAnd it works fine in VLC but Wirecast doesn’t accept udp ://..., but it accepts rtsp ://...
but I don’t now much about ffmpeg, so I only changed udp to rtsp
ffmpeg -f mpegts -i "udp://10.5.5.100:8554?fifo_size=10000" -f mpegts -vcodec copy rtsp://localhost:1000/goBut it doesn’t work and outputs this
rtsp://localhost:1000/go: Protocol not foundThank you for answers !!
Syndiquer tout le site
