
Recherche avancée
Médias (1)
-
ED-ME-5 1-DVD
11 octobre 2011, par
Mis à jour : Octobre 2011
Langue : English
Type : Audio
Autres articles (53)
-
Other interesting software
13 avril 2011, parWe don’t claim to be the only ones doing what we do ... and especially not to assert claims to be the best either ... What we do, we just try to do it well and getting better ...
The following list represents softwares that tend to be more or less as MediaSPIP or that MediaSPIP tries more or less to do the same, whatever ...
We don’t know them, we didn’t try them, but you can take a peek.
Videopress
Website : http://videopress.com/
License : GNU/GPL v2
Source code : (...) -
Déploiements possibles
31 janvier 2010, parDeux types de déploiements sont envisageable dépendant de deux aspects : La méthode d’installation envisagée (en standalone ou en ferme) ; Le nombre d’encodages journaliers et la fréquentation envisagés ;
L’encodage de vidéos est un processus lourd consommant énormément de ressources système (CPU et RAM), il est nécessaire de prendre tout cela en considération. Ce système n’est donc possible que sur un ou plusieurs serveurs dédiés.
Version mono serveur
La version mono serveur consiste à n’utiliser qu’une (...) -
Configuration spécifique d’Apache
4 février 2011, parModules spécifiques
Pour la configuration d’Apache, il est conseillé d’activer certains modules non spécifiques à MediaSPIP, mais permettant d’améliorer les performances : mod_deflate et mod_headers pour compresser automatiquement via Apache les pages. Cf ce tutoriel ; mode_expires pour gérer correctement l’expiration des hits. Cf ce tutoriel ;
Il est également conseillé d’ajouter la prise en charge par apache du mime-type pour les fichiers WebM comme indiqué dans ce tutoriel.
Création d’un (...)
Sur d’autres sites (8230)
-
ffmpeg error while converting to mp4 Error while opening encoder for output stream #0.0
20 mars 2016, par JoshI am trying to convert various file types to mp4 to be displayed using ffmpeg, but i keep getting the error :
Error while opening encoder for output stream #0.0 - maybe incorrect parameters such as bit_rate, rate, width or height
Another piece that looks important is :
[libx264 @ 0x93caef0] broken ffmpeg default settings detected
[libx264 @ 0x93caef0] use an encoding preset (e.g. -vpre medium)
[libx264 @ 0x93caef0] preset usage : -vpre -vpre
[libx264 @ 0x93caef0] speed presets are listed in x264 —help
[libx264 @ 0x93caef0] profile is optional ; x264 defaults to high
The latest code I am running is :
ffmpeg -i source -s 320x240 -r 30000/1001 -b 200k -bt 240k -vcodec libx264 -coder 0 -bf 0 -refs 1 -flags2 -wpred-dct8x8 -level 30 -maxrate 10M -bufsize 10M -acodec libfaac -ac 2 -ar 48000 -ab 192k destination
I have seen a few other people with this issue, but their fixes didn’t work for some reason.
In case it matters : ultimately this will be used in php, though I am trying to get it working first via putty
EDIT: : Here is the full thing as requested(using a wmv, have tested wmv and flv) :
~ >> ffmpeg -i path.wmv -s 320x240 -r 30000/1001 -b 200k -r 29.97 -bt 240k -vcodec libx264 -coder 0 -bf 0 -refs 1 -flags2 -wpred-dct8x8 -level 30 -maxrate 10M -bufsize 10M -acodec libfaac -ac 2 -ar 48000 -ab 192k path.mp4
FFmpeg version SVN-r26076, Copyright (c) 2000-2011 the FFmpeg developers
built on Aug 28 2012 17:55:47 with gcc 4.1.2 20080704 (Red Hat 4.1.2-52)
configuration: --enable-version3 --enable-gpl --enable-nonfree --enable-shared --enable-postproc --enable-avfilter --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libvpx --enable-libfaac --enable-libmp3lame --enable-libtheora --enable-libvorbis --enable-libx264 --enable-libxvid --disable-ffplay --disable-indevs --disable-outdevs --disable-demuxer=v4l --disable-demuxer=v4l2 --disable-mmx
libavutil 50.36. 0 / 50.36. 0
libavcore 0.16. 1 / 0.16. 1
libavcodec 52.108. 0 / 52.108. 0
libavformat 52.93. 0 / 52.93. 0
libavdevice 52. 2. 3 / 52. 2. 3
libavfilter 1.74. 0 / 1.74. 0
libswscale 0.12. 0 / 0.12. 0
libpostproc 51. 2. 0 / 51. 2. 0
Seems stream 1 codec frame rate differs from container frame rate: 1000.00 (1000/1) -> 29.97 (30000/1001)
Input #0, asf, from 'path.wmv':
Metadata:
SfOriginalFPS : 299
WMFSDKVersion : 11.0.6001.7000
WMFSDKNeeded : 0.0.0.0000
IsVBR : 0
title : Wildlife in HD
artist :
copyright : © 2008 Microsoft Corporation
comment : Footage: Small World Productions, Inc; Tourism New Zealand | Producer: Gary F. Spradling | Music: Steve Ball
Duration: 00:00:30.09, start: 8.000000, bitrate: 6977 kb/s
Stream #0.0(eng): Audio: wmav2, 44100 Hz, 2 channels, s16, 192 kb/s
Stream #0.1(eng): Video: vc1, yuv420p, 1280x720, 5942 kb/s, 29.97 tbr, 1k tbn, 1k tbc
File 'path.mp4' already exists. Overwrite ? [y/N] y
[buffer @ 0x9ce9eb0] w:1280 h:720 pixfmt:yuv420p
[scale @ 0x9ce8f70] w:1280 h:720 fmt:yuv420p -> w:320 h:240 fmt:yuv420p flags:0x4
[libx264 @ 0x9ce9ef0] broken ffmpeg default settings detected
[libx264 @ 0x9ce9ef0] use an encoding preset (e.g. -vpre medium)
[libx264 @ 0x9ce9ef0] preset usage: -vpre <speed> -vpre <profile>
[libx264 @ 0x9ce9ef0] speed presets are listed in x264 --help
[libx264 @ 0x9ce9ef0] profile is optional; x264 defaults to high
Output #0, mp4, to 'path.mp4':
Stream #0.0(eng): Video: libx264, yuv420p, 320x240, q=2-31, 200 kb/s, 90k tbn, 29.97 tbc
Stream #0.1(eng): Audio: libfaac, 48000 Hz, 2 channels, s16, 192 kb/s
Stream mapping:
Stream #0.1 -> #0.0
Stream #0.0 -> #0.1
Error while opening encoder for output stream #0.0 - maybe incorrect parameters such as bit_rate, rate, width or height
</profile></speed>Thanks for any help
-
Death of A Micro Center
21 septembre 2012, par Multimedia Mike — HistoryThe Micro Center computer store located in Santa Clara, CA, USA closed recently :
I liked Micro Center. I have liked Micro Center ever since I first visited their Denver, CO location 10 years ago. I would sometimes drive an hour in each direction just to visit that shop. I was excited to see that they had a location in the Bay Area when I moved here a few years ago (despite the preponderance of Fry’s stores).
Now this location is gone. I wonder how much of the “we couldn’t come to favorable terms on a lease” was true (vs. an excuse to close a retail store at a time when more business is moving online, particularly in the heart of Silicon Valley). But that’s not what I wanted to discuss. I came here to discuss…
The Micro Center Window Logos
The craziest part about shopping the Santa Clara Micro Center location was the logos they displayed on the window outside. Every time I saw it, it made me sentimental for a time when some of these logos were current, or when some of these companies were still in business. Some of the logos on their front window were for companies I’ve never heard of. It reminds me of the nearby 7-11 convenience stores when I was growing up– their walls were decorated with people sporting embarrassingly 1970s styles long after the 1970s had transpired.
I thought I would record what those front window logos were and try to pinpoint when the store launched exactly (assuming the logos have been their since the initial opening and never changed).
Click for larger image
Here we have Lotus, Hewlett Packard/HP, Corel, Fuji, Power Macintosh, NEC, and Fujitsu. Lotus was purchased by IBM in 1995 and still seems to be maintained as a separate brand. The Power Macintosh was introduced as a brand in 1994. Corel’s logo has seen a few mutations over the years but I don’t know when this one fell out of favor.
Fuji (vs. Fujitsu) appears to refer to Fujifilm, though this logo is also obsolete.
Click for larger image
Hayes– I specifically remember reading the Slashdot post accouncing that Hayes is dead (followed by many comments reminiscing about the Hayes command set). Here is the post, from early 1999.
From Googling, it doesn’t appear IBM still has a presence in the consumer computing space (though they do have something pertaining to software for consumer products). Then there’s the good old rainbow Apple logo, something that went away in 1997. I suspect 1997 was also the last hurrah of the name ‘Macintosh’ (though I remember mistakenly referring to Apple computer products as Macintoshes well into the mid-2000s and inadvertently angering some Apple enthusiasts).
Click for larger image
As for the next segment, obviously, both Sony and Toshiba are still very much alive. Iomega was acquired by EMC in 2008 but is still maintained as a separate brand. USRobotics is still around and making — what else ? — 56K modems (and their current logo is slightly different than the one seen here).
Targus seems to be a case maker (“Leading Provider of Cases, Bags and Accessories for Laptops and Tablets”). I wonder if that’s just their current business or if they had more areas long ago ? It seems strange that they would get brand billing like this.
Finally, searching for information about Practical Peripherals only produces sites about how they’re long dead (like this history lesson). It’s unclear when they died.
The interior of this store was also decorated with more technology company logos near the ceiling (I didn’t really register that fact until I had visited many times). Regrettably, I now won’t be able to see how up to date those logos were.
Based on the data points above, it’s safe to conclude that the store opened between 1995 or 1996 (again, assuming the logos were placed at opening and never changed).
Epilogue
Here’s one more curious item still visible from the outside :
“See the world’s fastest PC !” Featuring an Intel Core 2 Extreme ? That CPU dates back to 2007 and was succeeded by Nehalem in late 2008. So even that sign, which is presumably easier and cleaner to replace than the window logos, was absurdly out of date.
-
Building FFmpeg with NVIDIA GPU Hardware Acceleration in docker image, cannot load libnvcuvid.so.1 and libnvidia-encode.so.1
22 mars 2023, par konovificationI'm trying to build FFmpeg with NVIDIA GPU Hardware Acceleration following these instructions : https://docs.nvidia.com/video-technologies/video-codec-sdk/ffmpeg-with-nvidia-gpu/index.html#compiling-for-linux. The Docker image I'm using is
nvidia/cuda:12.0.1-devel-ubuntu20.04


Running the test command
ffmpeg -y -vsync 0 -hwaccel cuda -hwaccel_output_format cuda -i bbb.mp4 -c:a copy -c:v h264_nvenc -b:v 5M output.mp4
, I get the following output :

ffmpeg version N-109965-ge50a02b0f6 Copyright (c) 2000-2023 the FFmpeg developers 
 built with gcc 9 (Ubuntu 9.4.0-1ubuntu1~20.04.1) 
 configuration: --enable-nonfree --enable-cuda-nvcc --enable-libnpp --extra-cflags=-I/usr/local/cuda/include --extra-ldflags=-L/usr/local/cuda/lib64 --disable-static --enable-shared 
 libavutil 58. 3.100 / 58. 3.100 
 libavcodec 60. 6.100 / 60. 6.100 
 libavformat 60. 4.100 / 60. 4.100 
 libavdevice 60. 2.100 / 60. 2.100 
 libavfilter 9. 4.100 / 9. 4.100 
 libswscale 7. 2.100 / 7. 2.100 
 libswresample 4. 11.100 / 4. 11.100 
-vsync is deprecated. Use -fps_mode 
Passing a number to -vsync is deprecated, use a string argument as described in the manual. 
Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'bbb.mp4': 
 Metadata: 
 major_brand : isom 
 minor_version : 1 
 compatible_brands: isomavc1 
 creation_time : 2013-12-16T17:44:39.000000Z 
 title : Big Buck Bunny, Sunflower version 
 artist : Blender Foundation 2008, Janus Bager Kristensen 2013 
 comment : Creative Commons Attribution 3.0 - http://bbb3d.renderfarming.net 
 genre : Animation 
 composer : Sacha Goedegebure 
 Duration: 00:10:34.60, start: 0.000000, bitrate: 3481 kb/s 
 Stream #0:0[0x1](und): Video: h264 (High) (avc1 / 0x31637661), yuv420p(progressive), 1920x1080 [SAR 1:1 DAR 16:9], 2998 kb/s, 30 fps, 30 tbr, 30k tbn (default)
 Metadata: 
 creation_time : 2013-12-16T17:44:39.000000Z 
 handler_name : GPAC ISO Video Handler 
 vendor_id : [0][0][0][0] 
 Stream #0:1[0x2](und): Audio: mp3 (mp4a / 0x6134706D), 48000 Hz, stereo, fltp, 160 kb/s (default) 
 Metadata: 
 creation_time : 2013-12-16T17:44:42.000000Z 
 handler_name : GPAC ISO Audio Handler 
 vendor_id : [0][0][0][0] 
 Stream #0:2[0x3](und): Audio: ac3 (ac-3 / 0x332D6361), 48000 Hz, 5.1(side), fltp, 320 kb/s (default) 
 Metadata: 
 creation_time : 2013-12-16T17:44:42.000000Z 
 handler_name : GPAC ISO Audio Handler 
 vendor_id : [0][0][0][0] 
 Side data: 
 audio service type: main 
Stream mapping: 
 Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc)) 
 Stream #0:2 -> #0:1 (copy) 
Press [q] to stop, [?] for help 
[h264 @ 0x55bd878c2d80] Cannot load libnvcuvid.so.1 
[h264 @ 0x55bd878c2d80] Failed loading nvcuvid. 
[h264 @ 0x55bd878c2d80] Failed setup for format cuda: hwaccel initialisation returned error. 
[h264_nvenc @ 0x55bd86f5e680] Cannot load libnvidia-encode.so.1 
[h264_nvenc @ 0x55bd86f5e680] The minimum required Nvidia driver for nvenc is 520.56.06 or newer 
[vost#0:0/h264_nvenc @ 0x55bd86f5e1c0] Error initializing output stream: Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
Conversion failed! 



Output from
nvidia-smi
:

+-----------------------------------------------------------------------------+
| NVIDIA-SMI 525.85.05 Driver Version: 525.85.05 CUDA Version: 12.0 |
|-------------------------------+----------------------+----------------------+
| GPU Name Persistence-M| Bus-Id Disp.A | Volatile Uncorr. ECC |
| Fan Temp Perf Pwr:Usage/Cap| Memory-Usage | GPU-Util Compute M. |
| | | MIG M. |
|===============================+======================+======================|
| 0 NVIDIA GeForce ... Off | 00000000:01:00.0 On | N/A |
| 27% 43C P8 12W / 250W | 500MiB / 11264MiB | 1% Default |
| | | N/A |
+-------------------------------+----------------------+----------------------+
 
+-----------------------------------------------------------------------------+
| Processes: |
| GPU GI CI PID Type Process name GPU Memory |
| ID ID Usage |
|=============================================================================|
+-----------------------------------------------------------------------------+



The shared libraries are not part of the docker image. What are my options to add them ?